S4029 Perkins DSN044 Starter Motor Wholesale Supply

S4029 Starter Motor Wholesale Fitment for Perkins industrial-engine and Caterpillar equipment

Perkins distributors, Caterpillar equipment dealers and Denso starter buyers use S4029 to keep Perkins industrial-engine and Caterpillar equipment demand tied to one 12V, 3.0kW, 10T CW configuration. The practical distinction is the 12V 3.0kW 10T module-3.175 product cross-referenced to DSN044 and 428000-1380, which should be checked before a similar heavy-duty housing is accepted.

Build the S4029 RFQ around the complete removed-unit number, exact machine or engine information, mounting-face and terminal-side photographs, quantity and delivery point. These details let Elecdura quote the specified starter, export packing and timing without turning the offer into a general application guess.

S4029 Starter Motor Specifications and Drawing for Wholesale Buyers

Compare S4029 at the 3 mounting holes shown as 11.5, 11.5, 11.5 mm, Ø127 mm mounting-hole circle and Ø89 mm locating diameter. The 30 mm drive-end distance helps verify where the pinion sits relative to the flange, while a straight terminal-side photograph confirms whether the main and control connections remain accessible after installation.

For S4029, count the 10T pinion and confirm module 3.175, CW rotation, 12V and 3.0kW. The terminal side and solenoid clearance must also agree with the installation. A different pinion or cable position should be quoted separately, even when major cross-references overlap.

S4029 Starter Motor OE Cross-References for Distributor Enquiries

1. Search group: S4029, 113654, 3127539, 3644130, 0740001000, 4280001380, 11.131.014 can help distributor teams locate the relevant starter family.
2. Order boundary: Confirm the complete reference with 12V, 3.0kW, 10T, CW, the drawing and terminal photographs before accepting one physical unit.

S4029 Starter Motor Wholesale Supply and Export Planning

Elecdura supports distributor orders from 20 pieces, normally with a 7–15 day lead time after order confirmation and an 18-month warranty under agreed sales terms. Availability, export packing and delivery timing are confirmed against the requested S4029 quantity, destination and required arrival date.

Preserve the accepted product view because this line overlaps several industrial cross-references. Buyers should also state whether the order supports a single workshop, several branches or a fleet contract, allowing samples, safety stock, carton labels and staged dispatch to be planned around the actual service requirement.

The video introduces Elecdura starter-motor assembly and electrical testing for B2B supply programs. Selection of S4029 remains tied to the stated Perkins industrial-engine and Caterpillar equipment application, 10T drive, mounting interface and terminals, while the video helps distributor teams review production and testing capability.

S4029 Starter Motor Questions from Commercial Buyers

What should a distributor match before ordering S4029 for Perkins industrial-engine and Caterpillar equipment during fleet sourcing for the separate DSN044 cross-reference group?

Use the full old-unit number and Perkins industrial-engine and Caterpillar equipment record. Compare the 10T pinion, 3 mounting holes shown as 11.5, 11.5, 11.5 mm, Ø89 mm locating diameter and terminal side. Reject a candidate when its drive position, mounting face or cable connection differs.

Which operating factors should guide a fleet's S4029 reserve quantity in a Perkins DSN044 fleet program for the separate DSN044 cross-reference group?

Review workshop consumption by the stated Perkins industrial-engine and Caterpillar equipment population instead of pooling every visually similar starter. Record monthly issues, lead-time exposure and the reserve required at each branch. That information supports a practical S4029 reorder point and avoids holding the wrong drive-end version as emergency stock.

Why is the S4029 reference match only the start of product selection in a Perkins DSN044 fleet sourcing program for the separate DSN044 cross-reference group?

Use the complete alternate number, not a shortened series, and attach photographs of the removed unit. The S4029 group is acceptable only when 12V, 3.0kW, 10T, CW and the physical interface agree. A reference conflict should be clarified before samples or bulk quantities are released.

What electrical checks help confirm that S4029 is actually required in a Perkins DSN044 fleet workshop for the separate DSN044 cross-reference group?

Measure cranking voltage and voltage loss across the positive and negative paths, not only open-circuit battery voltage. Review the solenoid command, cable terminals, engine ground and ring gear. The results provide a useful baseline for S4029 installation and for any later service discussion with the supplier.

How should a buyer compare the old unit with the S4029 technical image during a Perkins DSN044 fleet inspection for the separate DSN044 cross-reference group?

For S4029, check 3 mounting holes shown as 11.5, 11.5, 11.5 mm, Ø89 mm locating diameter, Ø127 mm mounting-hole circle and 30 mm drive-end distance. Count the 10T pinion and photograph the terminal side. Record these checks against the approved sample without dismantling the unit.

Which arrival photographs help trace a shipment of S4029 during a Perkins DSN044 fleet receiving check for the separate DSN044 cross-reference group?

Receiving should verify the S4029 label, quantity and packaging before opening sampled cartons. Compare the 10T drive, Ø89 mm locating diameter, mounting holes and terminal side with the approved record. Any damage, missing protection or physical mismatch should be quarantined with photographs and lot details for prompt review.

How can an importer obtain an accurate delivered price for S4029 in a Perkins DSN044 fleet sourcing program for the separate DSN044 cross-reference group?

Provide the full reference and application, not only a broad brand name. Attach front, side and terminal views of the removed starter and state quantity, destination, required date and packaging needs. For S4029, Elecdura will respond with the matching specification, MOQ, availability, commercial terms and freight choices.

Which installation facts help review unusual performance from S4029 in a Perkins DSN044 fleet review for the separate DSN044 cross-reference group?

Submit the purchase reference, lot number, installation date and hours in service, then describe the symptom and operating conditions. Photographs and cranking-circuit measurements should accompany the report. This structured record gives Elecdura enough context to evaluate S4029 without assuming that every no-crank complaint originates inside the starter.

S4029 Request Starter Motor Wholesale Pricing

Send the complete S4029 reference, Perkins industrial-engine and Caterpillar equipment details, removed-unit label and photographs, quantity, destination and required arrival date. Email info@elecdurauto.com to discuss the specified 12V, 3.0kW, 10T CW starter, MOQ, packing, lead time, warranty and freight.