S4030 Perkins 1104D JCB Starter Motor Wholesale

S4030 Starter Motor Wholesale Application Support for Perkins 1104D and JCB 1104C-44R

For Perkins 1104D and JCB 1104C-44R, S4030 gives distributors a focused starting point for quotation and branch inventory. Confirm 12V, 3.0kW, 10T and CW, with particular attention to 12V 3.0kW 10T module-3.175 product with an Ø89 mm locating face, before combining demand from different fleets or workshops.

Separate different old-unit numbers from the S4030 enquiry and attach images for each configuration. State which line is a sample and which is a replenishment quantity, together with destination and timing. This gives the quotation a practical fitment boundary and a realistic packing and delivery plan.

S4030 Starter Motor Mounting Reference for Commercial Buyers

Check the S4030 drawing against the removed starter at the mounting face and drive end. The critical references are 3 mounting holes shown as 11.5, 11.5, 11.5 mm, Ø89 mm locating diameter, Ø127 mm mounting-hole circle and 30 mm drive-end distance. A physical mismatch should stop the unit from entering ordinary stock until the application is clarified.

The S4030 drive-end decision is completed by 10T, module 3.175 and CW, together with 12V and 3.0kW. Confirm main-terminal and control-terminal positions under the actual cable routing. Similar dimensions do not compensate for the wrong rotation, pinion or electrical rating.

S4030 Starter Motor Cross-Reference Boundary for Importers

The S4030 cross-reference group includes S4030, 113655, 116308, 0740000000, 4280001290, 11131077, AZF4545. Use these numbers to search supplier systems, then confirm 12V, 3.0kW, 10T, CW, mounting geometry and terminals.

For S4030, list and photograph each complete reference when pinions, drive positions or connectors differ. Elecdura can quote each physical starter independently.

S4030 Starter Motor Wholesale Ordering and Export Support

Elecdura can prepare S4030 orders for regional inventory, fleet workshops or industrial service demand. The standard starting point is 20 pieces, normally 7–15 days after order confirmation, with an 18-month warranty under agreed terms and packing selected for the destination and shipment method.

Buyers can state service urgency, supported equipment count and expected monthly use in the same RFQ. Elecdura can then discuss stock, production, packaging and staged delivery while maintaining the specified S4030 drive end and electrical rating throughout the order.

For supplier evaluation, the video presents Elecdura starter-motor assembly and testing. A S4030 order should still be released against the complete OE number, Perkins 1104D and JCB 1104C-44R details, electrical specification and physical comparison, giving purchasing both capability information and a clear product boundary.

S4030 Starter Motor Questions from Commercial Buyers

What traceability details should accompany a warranty enquiry for S4030 in a Perkins 1104D JCB service-network review for Perkins 1104D and JCB engine-build control?

Keep the carton or product traceability code and note when and where S4030 was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete evidence allows technical support to respond without repeated requests for basic information.

Which electrical conditions can imitate a failed S4030 starter motor in a Perkins 1104D JCB service-network workshop for Perkins 1104D and JCB engine-build control?

Before fitting S4030, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.

Which details separate S4030 from similar starters used around Perkins 1104D and JCB 1104C-44R during service-network sourcing for Perkins 1104D and JCB engine-build control?

For S4030, ask the workshop for the removed starter label and the exact equipment record. Match 12V, 3.0kW, 10T and CW, then compare the locating diameter, mounting holes and terminals. If one of those items changes, request another quotation instead of accepting the similar housing.

Can a purchasing team consolidate every S4030 reference into one stock line in a Perkins 1104D JCB service-network sourcing program for Perkins 1104D and JCB engine-build control?

The references identify a related sourcing family, not automatic interchangeability. Use S4030, 113655, 116308, 0740000000, 4280001290 to locate possible matches, then confirm 12V, 3.0kW, 10T, CW and the mounting face. Any difference in drive position, terminal layout or locating diameter requires a separate product decision.

Why is a straight mounting-face photo useful for confirming S4030 during a Perkins 1104D JCB service-network inspection for Perkins 1104D and JCB engine-build control?

Align the removed starter and S4030 at the mounting face. Compare Ø89 mm locating diameter, Ø127 mm mounting-hole circle, 3 mounting holes shown as 11.5, 11.5, 11.5 mm and 30 mm drive-end distance. Use the drawing for dimensions, measure with suitable tools and check terminals separately.

Can urgent service demand and routine S4030 replenishment share one enquiry in a Perkins 1104D JCB service-network program for Perkins 1104D and JCB engine-build control?

Separate planned maintenance demand from breakdown coverage and new-account stock. Share the number of supported machines, recent S4030 usage, transfer time between branches and the desired reserve. The resulting order can combine immediate units and scheduled replenishment while keeping the application and physical specification clearly identified.

How can a buyer quarantine a mismatched S4030 unit quickly during a Perkins 1104D JCB service-network receiving check for Perkins 1104D and JCB engine-build control?

For S4030, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 3 mounting holes shown as 11.5, 11.5, 11.5 mm, Ø89 mm locating diameter and the specified 10T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

What should be included in a wholesale enquiry for S4030 in a Perkins 1104D JCB service-network sourcing program for Perkins 1104D and JCB engine-build control?

Send the complete OE number, exact Perkins 1104D and JCB 1104C-44R details, removed-unit photographs, quantity and destination. Add the required arrival date, carton marking, payment preference and any sample request. Elecdura can then quote the specified 12V 3.0kW 10T CW starter with packing, lead time, warranty and freight options.

S4030 Email for Starter Motor B2B Pricing

A complete RFQ for S4030 should state the application, removed-unit number, physical photographs, quantity, destination and delivery target. Send these details to info@elecdurauto.com for a direct response on the correct 12V 3.0kW 10T CW starter, MOQ, packaging, warranty and shipping choices.