S6216S Cummins 4BT3.3 9T Starter Motor Wholesale

S6216S Starter Motor Wholesale Fitment for Massey Ferguson and Cummins 4BT3.3 applications

Massey Ferguson and Cummins service distributors can use S6216S as a controlled 9T stock line when the buyer needs a known two-hole configuration for repeat procurement.

Application

Massey Ferguson and Cummins 4BT3.3 applications

Commercial focus

Repeatable S6216S identification for Massey Ferguson parts distributors and Cummins aftermarket wholesalers.

Control point

9T drive, mounting face and terminals.

S6216S Starter Motor Technical Drawing for Distributor Approval

Technical mounting reference for comparison with the approved unit before sample or volume release.

First delivery control should cover 9T/CW, two Ø13 mm holes, 52-degree pattern, Ø120 mm face, Ø95 mm side reference and 20/33 mm axial details shown in the drawing. The drawing supports quotation and incoming inspection; the approved S6216S sample controls the final physical comparison.

S6216S Starter Motor OE Control for B2B Procurement

Keep S6216S with the complete Massey Ferguson or Cummins 4BT3.3 application, then check the nine-tooth drive, two-hole face and solenoid connections before release.

Related cross-references may lead a buyer to assume every 4982589-family unit has the same mounting relationship, although the item must still be matched to the machine record and sample.

Identity

S6216S plus the complete Massey Ferguson and Cummins 4BT3.3 applications record.

Comparison

9T drive, mounting face, nose profile and terminal position.

Release

Separate any variant that changes a physical control.

S6216S Starter Motor Bulk Supply, Sampling and Video

Send the machine or engine record, S6216S or full cross-reference, 9T confirmation, old-unit pictures, forecast quantity, delivery location and required carton specification.

Standard MOQ begins at 20 pieces. Neutral packing is available, and qualified private-label programs can be reviewed after the approved label, barcode, carton strength and protective inserts are confirmed for this exact item.

The video below introduces Elecdura starter-motor production and electrical-testing capability. The unit supplied under this page remains the S6216S configuration identified by the listed application, 9T drive and physical checks.

S6216S Starter Motor Buyer FAQ for Wholesale Orders

How should a distributor define S6216S for Massey Ferguson and Cummins 4BT3.3 applications before asking for volume pricing?

For a dealer or branch replenishment decision, begin the S6216S inquiry with the complete reference and the stated Massey Ferguson and Cummins 4BT3.3 applications scope. Keep S6216S with the complete Massey Ferguson or Cummins 4BT3.3 application, then check the nine-tooth drive, two-hole face and solenoid connections before release. Keep the machine or engine record beside the S6216S request because a shortened number or a housing photo does not define a reliable bulk-order configuration.

Why must the 9T pinion remain visible on S6216S dealer-order documents?

The key separator for this S6216S configuration is the 9T pinion with 12V, 2.2kW and CW rotation. Related cross-references may lead a buyer to assume every 4982589-family unit has the same mounting relationship, although the item must still be matched to the machine record and sample. Count the S6216S teeth on the removed unit and include a drive-end photo before approving a replacement or combining adjacent references in one stock code.

Which measured points matter when comparing the S6216S technical image with a master sample?

Use the S6216S technical image as a comparison aid, not as a scaled installation drawing for Massey Ferguson and Cummins 4BT3.3 applications. First delivery control should cover 9T/CW, two Ø13 mm holes, 52-degree pattern, Ø120 mm face, Ø95 mm side reference and 20/33 mm axial details shown in the drawing. The removed starter or approved S6216S master sample remains the final reference for mounting face, nose profile, connection position and drive engagement.

How can a S6216S OE group be controlled across dealer and independent-service enquiries?

The references S6216S, 4982589, 6008631310 can locate demand for S6216S, but they must remain tied to the defined Massey Ferguson and Cummins 4BT3.3 applications record. Keep S6216S with the complete Massey Ferguson or Cummins 4BT3.3 application, then check the nine-tooth drive, two-hole face and solenoid connections before release. If a S6216S physical control differs, quote it on a separate line rather than turning it into a universal interchange claim.

What should a distributor sign off on before accepting a first S6216S lot?

For initial S6216S acceptance, document the 9T drive, mounting arrangement, terminal orientation, labels and carton protection on a sample. First delivery control should cover 9T/CW, two Ø13 mm holes, 52-degree pattern, Ø120 mm face, Ø95 mm side reference and 20/33 mm axial details shown in the drawing. The approved S6216S sample gives procurement and warehouse teams one consistent release definition.

Which Massey Ferguson and Cummins 4BT3.3 applications records should appear on a detailed S6216S purchase request?

A useful S6216S enquiry needs more than a vehicle or machine name. Send the machine or engine record, S6216S or full cross-reference, 9T confirmation, old-unit pictures, forecast quantity, delivery location and required carton specification. Those Massey Ferguson and Cummins 4BT3.3 applications details allow the supplier to review the exact S6216S configuration without assumptions from a broad application family.

When is private-label review appropriate for the S6216S wholesale program?

Neutral cartons can support standard S6216S wholesale orders, while private-label work starts after label, barcode, carton strength and protective inserts are agreed for this configuration. Massey Ferguson parts distributors and Cummins aftermarket wholesalers should retain the S6216S version-specific references on purchase orders and warehouse labels.

What purchasing limitation should be remembered when viewing the S6216S factory video?

The product video introduces Elecdura starter-motor production and testing capability; it does not establish S6216S fitment. For Massey Ferguson and Cummins 4BT3.3 applications, the S6216S release decision remains tied to the full OE reference, 9T drive and the physical comparison saved for the order.

How can a parts network avoid reopening S6216S fitment questions on repeat orders?

For a repeat S6216S purchase, archive approved sample photos, reference list and inspection result with the item master. Related cross-references may lead a buyer to assume every 4982589-family unit has the same mounting relationship, although the item must still be matched to the machine record and sample. That Massey Ferguson and Cummins 4BT3.3 applications record prevents the same fitment question being reopened when a customer supplies an abbreviated number or a different description.

Request S6216S Starter Motor Wholesale Pricing

Send the machine or engine record, S6216S or full cross-reference, 9T confirmation, old-unit pictures, forecast quantity, delivery location and required carton specification. Elecdura will review the 12V, 2.2kW, 9T and CW configuration with the supplied application information before confirming sample, lead-time and wholesale-supply details.