STR2402ZL MTZ 50/80 10T Starter Motor Wholesale Supply

STR2402ZL MTZ 50/80 Starter Motor Supply for Tractor Parts Buyers

MTZ tractor service often relies on long numeric references that can lose zeros or separators during ordering. Keep the complete number from the old starter and the tractor model with the STR2402ZL request, then compare the 10T drive and three-hole face.

Send the tractor and engine details, old label and clear pinion, mounting and terminal photographs. Elecdura can prepare a quotation that regional distributors can use for seasonal stock, branch allocation and workshop replenishment.

STR2402ZL MTZ 50/80 Starter Motor Dimensions for Tractor Parts Supply

STR2402ZL 10T starter motor mounting and drive-end dimensions for buyer-side comparison.

The STR2402ZL drive end uses three Ø13 holes at 34°, 26° and 4°, an Ø100 locator, Ø146 mounting face and 30 mm axial reference. This distinctive pattern and the 10T module 3 pinion give MTZ service counters measurable points beyond the long 24.3708 number.

Keep the tractor model, old label and installed terminal-side photograph with the drawing. Those details help branches compare the same unit during quotation, receiving and later seasonal replenishment without shortening or rearranging the numeric reference.

STR2402ZL Starter Motor 24.3708 Number Checks for MTZ Importers

2402370800001, 2402370801, STR2402WA, 6441370804 and 300N10946Z support the purchasing trail. Preserve leading zeros and the complete suffix when the number is copied from a label or document.

• Confirm 12V, 2.5kW, 10 teeth, module 3 and CW.

• Compare three Ø13 holes and the Ø100 locator.

• Check the Ø146 face, 30 mm axial point and terminal direction.

STR2402ZL Starter Motor Seasonal Stock for MTZ Dealer Networks

Agricultural distributors can position STR2402ZL stock before planting and harvest periods, with branch quantities based on the active MTZ 50/80 population and transfer time. Elecdura can review neutral cartons, local-language labels and consolidated delivery to regional depots.

Provide tractor counts, recent demand, opening quantity and reorder schedule. The video below shows starter assembly and testing for buyers comparing factory capability for recurring farm-equipment supply.

The production video helps MTZ parts importers assess Elecdura assembly and electrical testing before planning seasonal STR2402ZL stock and regional delivery.

STR2402ZL Starter Motor Wholesale FAQ

Why must the full 24.3708 number be retained?

Long MTZ references can lose leading zeros or separators when copied between workshop notes, messages and purchase orders. Record every character from the old label and place it beside STR2402ZL. The complete number improves traceability and reduces the chance that a similar tractor starter is selected because only a short numeric section was supplied.

What mounting pattern identifies STR2402ZL?

Use the 34°, 26° and 4° pattern to position the three Ø13 holes around the Ø100 locator, then verify the Ø146 face and 30 mm axial point. Add direct measurements and a square drive-end photograph from the MTZ tractor. This asymmetric layout identifies the unit more reliably than motor-body appearance or a shortened 24.3708 reference.

Which MTZ details belong with an STR2402ZL inquiry?

Provide the MTZ 50 or 80 tractor model, year and engine details when known, plus the complete old starter number and clear photographs. Add the 10T pinion, mounting face, terminals, required quantity and destination. This gives Elecdura enough information to discuss fitment and commercial terms for the actual tractor group.

Which electrical checks help confirm an STR2402ZL requirement?

Record battery voltage before and during cranking, cable and ground condition, solenoid response and whether the pinion engages and releases normally on the identified MTZ tractor. Combine those findings with the complete 24.3708 reference and 10T configuration. This helps the buyer distinguish a starter requirement from battery, wiring or ring-gear problems before ordering replacement stock.

Can cartons carry local-language MTZ labels?

Local-language and customer labels can be reviewed after the buyer supplies wording, artwork, barcode format and quantities. Keep STR2402ZL, the complete long reference, 12V, 10T and a traceable shipment lot on the technical label. Translated application text can then help workshops without replacing the essential identification data.

Can regional depots share one STR2402ZL shipment?

Yes. List each depot quantity, code, delivery point and required date, then confirm that all demand uses the same 12V 2.5kW 10T configuration. Elecdura can review consolidated production and freight while applying separate carton marks so branches receive the intended quantity without losing technical identity.

How should STR2402ZL units be transferred between branches?

Keep the complete reference, 12V rating, 10T description, shipment lot and destination branch on the carton or transfer document. Confirm that the receiving branch supports the same MTZ 50/80 application. Clear transfer identity allows a regional distributor to balance seasonal demand without losing the product information needed for workshop issue and later replenishment.

What belongs in a seasonal STR2402ZL quotation?

Send the full STR2402ZL or 24.3708 reference, MTZ tractor and engine details, quantity by branch, delivery country, seasonal deadline and packing or language-label needs. Add drive-end and terminal views when the old unit is available. Elecdura can return pricing, fitment comments, branch marking options and delivery timing for the confirmed 12V 2.5kW 10T CW starter.

Request a STR2402ZL Starter Motor Wholesale Quote

Send STR2402ZL or the complete 24.3708, STR2402WA, 6441370804 or 300N10946Z reference, the MTZ 50/80 tractor details, old-unit photographs, quantity by branch and destination. Elecdura will quote the 12V 2.5kW 10T CW starter with fitment, packing and delivery terms.

Retain leading zeros and separate branch quantities on the RFQ so the reference, carton marks and seasonal delivery plan remain clear from purchase to workshop use.