UD101235S Daewoo Starter Motor 12V 1.40kW 10T

UD101235S Daewoo Starter Motor Bulk Supply for Fleet and Equipment Parts Buyers

When sourcing UD101235S for Daewoo equipment identified by starter reference UD101235S, control the order by the complete reference and the 12V, 1.40kW, 10-tooth clockwise configuration. A visual match is not enough: compare the old-unit label, drive end, mounting face, pinion reach and cable or terminal arrangement with the supplied sample.

The distributor record for UD101235S should connect the reference group UD101235S / D141164 / D141291 / 228000-2150 / 228000-5060 with Daewoo equipment identified by starter reference UD101235S. Add the old-unit label, mounting-face image, terminal view and receiving result to that record. Reuse it for repeat quotations, but create a new revision whenever the supplier changes the suffix, housing, pinion or electrical rating. A disciplined record reduces avoidable substitutions during urgent replenishment.

UD101235S Starter Motor B2B Production and Test Video for Bulk Procurement

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for UD101235S.

UD101235S Starter Motor Distributor Specifications for B2B Supply

UD101235S Starter Motor OE Cross-Reference Review for Aftermarket Buyers

Use UD101235S as the primary purchasing reference and cross-check D141164, D141291, 228000-2150, 228000-5060. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

UD101235S Starter Motor Bulk Fitment Approval for Fleet Replacement

Confirm the complete UD101235S / D141164 / D141291 / 228000-2150 / 228000-5060 group together with the 12V, 1.40kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

UD101235S Starter Motor Wholesale Receiving Inspection for Wholesale Supply

For a wholesale shipment, sample units across the UD101235S lot rather than inspecting only the top carton. Compare reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

UD101235S Starter Motor MOQ and Private-Label Supply for Distributor Sourcing

UD101235S Starter Motor Distributor FAQ for Bulk Procurement

What makes a UD101235S RFQ technically complete?

Send UD101235S and all visible OE or catalog references, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for UD101235S?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment evidence is incomplete. Mark the signed-off sample with UD101235S, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can UD101235S be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on UD101235S claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for UD101235S?

Use UD101235S as the control reference and compare the complete group UD101235S / D141164 / D141291 / 228000-2150 / 228000-5060. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

Where is UD101235S commonly used, and what still needs confirmation?

Confirm the complete UD101235S / D141164 / D141291 / 228000-2150 / 228000-5060 group together with the 12V, 1.40kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on UD101235S?

Confirm the complete UD101235S / D141164 / D141291 / 228000-2150 / 228000-5060 group together with the 12V, 1.40kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched UD101235S order?

Confirm the complete UD101235S / D141164 / D141291 / 228000-2150 / 228000-5060 group together with the 12V, 1.40kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering UD101235S?

Compare the equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Request a B2B Quote for UD101235S Starter Motors

Send the complete reference, Daewoo equipment identified by starter reference UD101235S, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.