0001261014 Weichai Starter Motor 24V 8.0kW 11T

0001261014 Heavy-Duty Starter Motor for WEICHAI WP10

For aftermarket wholesalers confirming an incoming batch, Elecdura offers 0001261014 as an aftermarket heavy-duty starter motor for WEICHAI WP10. The 24V, 8.0kW and 11T configuration is intended for professional replacement sourcing by heavy-duty parts distributors, importers and fleet suppliers.

For sourcing managers defining label requirements, the goal is a repeatable supply line: one agreed product identity, one packaging definition and one set of incoming checks. This is useful for importers building category coverage as well as fleet suppliers replenishing an existing starter reference.

0001261014 Starter Motor Specifications and Technical Drawing

For maintenance suppliers checking repeat-order specifications, this reference group can cover nearby starter versions. Keep 0001261014, 24V, 8.0kW and 11T together on the RFQ, then compare the flange, drive end and terminal layout before treating another number as a direct replacement.

For equipment-parts dealers matching the starter being replaced, the source-faithful technical drawing records the available mounting information for 0001261014, including 3×Ø11, Ø127; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

0001261014 Aftermarket Replacement and Application

For application specialists comparing the flange and terminals, match 0001261014 to WEICHAI WP10 and keep the related numbers 0001261014, 612600090562, 612600090409 on the same enquiry. If the old unit carries another suffix, flange, drive or terminal arrangement, quote it separately until the physical version is confirmed.

For replacement-parts sellers reviewing a replacement proposal, the starter removed from the machine should agree with the approved drive-end, side and rear views. Confirm the 11T pinion and module 3.5, then keep any different flange or terminal layout outside the current RFQ entry.

0001261014 Wholesale Supply for Distributors and Importers

For warehouse planners updating a customer item master, importers planning 0001261014 stock can request volume pricing, neutral or reviewed private-label packaging and agreed inspection records. Standard guidance is 20 pcs minimum, 7–15 days after confirmation and 18 months warranty under sales terms.

For importers reviewing customer demand, define the reference group, accepted product version, inspection request and packaging standard before production. Those records help both sides manage replenishment and resolve any receiving question efficiently.

0001261014 Starter Motor Buyer FAQ

Which specification deserves priority for 0001261014 terminal access before accepting a substitute?

For engine-parts specialists reviewing a replacement proposal, compare the rear housing and terminal direction in the approved product views for 0001261014. The battery cable and start-signal lead must reach without sharp bends, rubbing or contact with hot and moving parts. If the body can be clocked differently within the same reference family, confirm the actual terminal position before stock is committed to the order.

How can a buyer screen 0001261014 locating face before accepting a substitute?

For fleet-parts buyers confirming the stated application, the 0001261014 flange should sit flat against the WEICHAI WP10 mounting surface without being pulled into place by the bolts. Clean both faces and compare the locating shoulder, hole pattern and any stated diameters. Rocking, a visible gap or bolt misalignment indicates that the version check is incomplete and installation should stop.

Which comparison prevents a mismatch for 0001261014 solenoid and cable routing when preparing a fitment request?

For technical sales teams checking application evidence, use the side and rear photographs of 0001261014 to check solenoid position, battery-stud direction and start-terminal access in WEICHAI WP10. Cables should reach without stretching, sharp bends or contact with hot and moving parts. If the customer's old unit is clocked differently, request an installed photo before the order is assigned.

What should receiving teams compare on 0001261014 order testing before an installation slot is booked?

For sourcing managers planning a repeat order, Elecdura can discuss armature, solenoid, no-load and load testing for 0001261014. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 8.0kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

Which check should lead module 3.5 during an application review?

For application specialists checking repeat-order specifications, module 3.5 is part of the gear geometry for 0001261014. Confirm it together with the 11-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

How can a buyer screen Ø127 before comparing delivery options?

For replacement-parts sellers matching the removed unit, 0001261014 shows Ø127. Measure each diameter at the same shoulder or circle indicated in the drawing, rather than taking an unrelated outside-housing dimension. The locating feature centers the starter at the ring gear, so a diameter mismatch can matter even when the bolt holes appear to align.

How should a workshop distinguish WEICHAI WP10 previously replaced starter when the removed unit is available?

For service-parts networks reviewing drive-end geometry, ask whether the starter removed from WEICHAI WP10 is original or an earlier replacement. If it has been substituted before, the visible unit may not represent the equipment's initial build. Use its label and geometry together with 0001261014, 24V, 8.0kW and 11T before turning that history into a bulk stocking decision.

How can a buyer screen flange clocking before comparing delivery options?

For importers comparing nearby starter versions, no separate angular callout is stated for 0001261014. Align the old and offered starters by the locating face, then photograph bolt positions and terminal clocking from matching viewpoints. This provides a usable orientation check for the purchasing team without assigning an angle taken from another model that only shares a similar flange outline.

Request a Wholesale Quote for 0001261014 Heavy-Duty Starter Motor

For inventory buyers planning a repeat order, send 0001261014, 612600090562, 612600090409, the WEICHAI WP10 application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 8.0kW, 11T version and prepare a product-specific wholesale quotation.