WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T Starter Motor

WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T Heavy-Duty Starter Motor for WEICHAI WD615 (small 10-tooth version)

For warehouse planners confirming an incoming batch, this aftermarket heavy-duty starter motor is specified for WEICHAI WD615 (small 10-tooth version) with 24V, 8.0kW and 10T. The page keeps the replacement identity, technical definition and stocking order information in one place.

For importers preparing a volume quote, distributors can quote the exact application and starter configuration without turning the page into a generic component guide. Elecdura can also review customer labels, carton requirements and inspection documents for planned orders.

WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T Starter Motor Specifications and Technical Drawing

For technical buyers checking repeat-order specifications, the 10T pinion and module 3.5 are important replacement identifiers. Match them with the flange and drive projection to protect the ring gear from an incorrect tooth pitch or engagement depth.

For engine-parts specialists matching the unit taken from service, the source-faithful technical drawing records the available mounting information for WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T, including Ø127, 66.5±1.5 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T Aftermarket Replacement and Application

For product managers comparing the flange and terminals, match WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T to WEICHAI WD615 (small 10-tooth version) and keep the related numbers WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T on the same enquiry. If the old unit carries another suffix, flange, drive or terminal arrangement, quote it separately until the physical version is confirmed.

For maintenance suppliers reviewing a replacement proposal, start with the complete reference and application, then compare the 10T drive, flange shape and terminal orientation. A physical difference should be resolved before volume pricing is accepted.

WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T Wholesale Supply for Distributors and Importers

For private-label buyers updating a customer item master, Elecdura supports repeat-order and new-line sourcing for WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T. Commercial planning can cover a 20 pcs MOQ, 7–15 day lead time subject to confirmation, neutral packaging or private-label review, and an 18-month agreed warranty.

For purchasing teams reviewing customer demand, available quality support includes armature, solenoid, no-load and load testing. Buyers may define sampling, report format, reference labels, terminal protection and carton marks before production so the shipment can be checked against the approved order specification.

WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T Starter Motor Buyer FAQ

What should receiving teams compare on WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T inside a mixed starter shipment during an application review?

For wholesale program managers planning mixed-model inventory, give each carton line its own reference, 24V, 8.0kW and 10T marking. The packing list should preserve those same fields. Receiving can then compare labels and drive-end appearance without opening every carton, while any mixed or unclear unit is isolated for review.

How should a distributor confirm module 3.5 during an application review?

For replacement-parts sellers confirming the stated application, module 3.5 is part of the gear geometry for WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T. Confirm it together with the 10-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

Which detail separates WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T side-profile photograph before comparing delivery options?

For service-parts networks checking application evidence, the side profile of WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T shows body length, solenoid placement and the relationship between flange and drive. Compare it with a square side view of the removed starter, then use 66.5±1.5 mm where available. This angle helps reveal a housing or projection difference that a front-only photograph can miss.

What evidence best identifies WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T drive-end photograph when preparing a technical RFQ?

For importers preparing an OE-based quote, the drive-end image for WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T should be used to count 10 teeth and compare the flange, locating shoulder and pinion rest position. Use the same viewing angle when recording the unit taken from service. An angled image may conceal the pinion count or flange holes, so ask for a direct view when those details decide the match.

What must be matched before quoting flange clocking before comparing delivery options?

For product managers checking repeat-order specifications, no separate angular callout is stated for WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T. Align the old and offered starters by the locating face, then photograph bolt positions and terminal clocking from matching viewpoints. This provides a usable orientation check for the purchasing team without assigning an angle taken from another model that only shares a similar flange outline.

How should a distributor confirm 10-tooth pinion identification during fitment review?

For maintenance suppliers matching the starter being replaced, count all 10 teeth on the WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

How can a buyer screen 66.5±1.5 mm for warehouse identification?

For equipment-parts dealers reviewing drive-end geometry, use 66.5±1.5 mm when comparing WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T. Measure from the drawing's indicated faces and keep pinion rest position separate from overall body length. These axial values influence how the drive sits and engages, so the set should agree with the removed starter before a fleet or distributor quantity is released.

What evidence best identifies WEICHAI WD615 (small 10-tooth version) production changes when preparing a fitment request?

For purchasing teams comparing nearby starter versions, WEICHAI WD615 (small 10-tooth version) may appear across equipment years or engine revisions, so the application name is an entry point rather than the sole proof of fitment. Match WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T, 24V, 8.0kW and 10T to the unit taken from service. A changed suffix, flange or terminal layout should open a separate review for that machine.

Request a Wholesale Quote for WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T Heavy-Duty Starter Motor

For distributors building a new starter range, prepare the RFQ with WEICHAI WD615 (small 10-tooth version) 24V 8.0kW 10T, the complete application, quantity, target delivery and packaging requirements. We will respond with the defined 24V 8.0kW 10T starter motor line rather than a generic substitute.