VG1560090001-24V-8.5KW-10T-3.5M Weichai Starter Motor

VG1560090001-24V-8.5KW-10T-3.5M Heavy-Duty Starter Motor for WEICHAI WD615 (large 10-tooth version)

For private-label buyers confirming an incoming batch, Elecdura offers VG1560090001-24V-8.5KW-10T-3.5M as an aftermarket heavy-duty starter motor for WEICHAI WD615 (large 10-tooth version). The 24V, 8.5kW and 10T configuration is intended for professional replacement sourcing by heavy-duty parts distributors, importers and fleet suppliers.

For purchasing teams preparing a volume quote, the commercial value is a clearly identified starter rather than a generic visual match. Buyers can use the OE group, application, product images and technical data together, while neutral packaging and private-label review can be discussed for qualified bulk orders.

VG1560090001-24V-8.5KW-10T-3.5M Starter Motor Specifications and Technical Drawing

For fitment reviewers checking repeat-order specifications, this reference group can cover nearby starter versions. Keep VG1560090001-24V-8.5KW-10T-3.5M, 24V, 8.5kW and 10T together on the RFQ, then compare the flange, drive end and terminal layout before treating another number as a direct replacement.

For application specialists matching the unit taken from service, the source-faithful technical drawing records the available mounting information for VG1560090001-24V-8.5KW-10T-3.5M, including 66.5±1.5 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

VG1560090001-24V-8.5KW-10T-3.5M Aftermarket Replacement and Application

For distributors confirming electrical ratings, use VG1560090001-24V-8.5KW-10T-3.5M as the primary product identity for WEICHAI WD615 (large 10-tooth version). The cross-reference group VG1560090001-24V-8.5KW-10T-3.5M, VG1560090001, AZF11.131.564 supports aftermarket matching, while the electrical rating and drive-end configuration distinguish the exact version supplied here.

For technical buyers reviewing a replacement proposal, use the gallery to compare the flange, 10T pinion and rear connections before approving the order. Keep module 3.5 with the tooth count. A changed mounting or terminal feature should be quoted as another starter version.

VG1560090001-24V-8.5KW-10T-3.5M Wholesale Supply for Distributors and Importers

For engine-parts specialists updating a customer item master, wholesale enquiries for VG1560090001-24V-8.5KW-10T-3.5M can combine product matching with packaging and inspection planning. Elecdura offers neutral packaging and private-label review for qualified orders, with 20 pcs MOQ, 7–15 days subject to confirmation and an 18-month warranty under agreed terms.

For regional parts suppliers reviewing customer demand, batch consistency should be controlled through the agreed reference, electrical rating, pinion, packaging and inspection points. Elecdura can discuss test documentation and pre-shipment photos that match the needs of the distributor or importer.

VG1560090001-24V-8.5KW-10T-3.5M Starter Motor Buyer FAQ

Which check should lead VG1560090001-24V-8.5KW-10T-3.5M inside a mixed starter shipment during an application review?

For inventory buyers planning mixed-model inventory, give each carton line its own reference, 24V, 8.5kW and 10T marking. The packing list should preserve those same fields. Receiving can then compare labels and drive-end appearance without opening every carton, while any mixed or unclear unit is isolated for review.

How should a workshop distinguish VG1560090001-24V-8.5KW-10T-3.5M three-view gallery for repeatable sourcing?

For maintenance suppliers confirming the stated application, use the drive-end view to compare the pinion and flange, the side profile to judge housing length and solenoid position, and the rear view to check terminals. All three images belong to VG1560090001-24V-8.5KW-10T-3.5M; they should be reviewed together with the 10T drive and WEICHAI WD615 (large 10-tooth version) application. Request an additional close-up when the customer's unit hides a deciding feature.

What should purchasing verify first for VG1560090001-24V-8.5KW-10T-3.5M terminal access before accepting a substitute?

For equipment-parts dealers checking application evidence, compare the rear housing and terminal direction in the approved product views for VG1560090001-24V-8.5KW-10T-3.5M. The battery cable and start-signal lead must reach without sharp bends, rubbing or contact with hot and moving parts. If the body can be clocked differently within the same reference family, confirm the actual terminal position before stock is committed to the order.

Which comparison prevents a mismatch for VG1560090001-24V-8.5KW-10T-3.5M technical claim evidence for a documented fitment decision?

For purchasing teams building a new starter range, retain the unit label, affected quantity, carton condition, installation photos and cranking-voltage results. Add close images of the drive and terminals and note the WEICHAI WD615 (large 10-tooth version) equipment. This evidence helps separate transport damage, an electrical-system problem, incorrect fitment and a starter fault without relying on a general description of failure.

What evidence best identifies 10-tooth pinion identification during fitment review?

For distributors separating similar housings, count all 10 teeth on the VG1560090001-24V-8.5KW-10T-3.5M pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

How should a distributor confirm VG1560090001-24V-8.5KW-10T-3.5M order testing before an installation slot is booked?

For aftermarket product managers planning replenishment, Elecdura can discuss armature, solenoid, no-load and load testing for VG1560090001-24V-8.5KW-10T-3.5M. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 8.5kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

Which specification deserves priority for WEICHAI WD615 (large 10-tooth version) before accepting a substitute?

For engine-parts specialists reviewing drive-end geometry, WEICHAI WD615 (large 10-tooth version) identifies the intended heavy-duty engine family, but it should not be used by itself. Pair the application with VG1560090001-24V-8.5KW-10T-3.5M, the 24V electrical system and the 10-tooth drive. That combination lets purchasing exclude nearby versions used on another engine build, chassis revision or equipment configuration prior to fixing the quote and shipment date.

How can an importer validate mounting-hole pattern before a purchase order is released?

For fleet-parts buyers comparing nearby starter versions, A complete mounting-hole callout is not stated for VG1560090001-24V-8.5KW-10T-3.5M. Photograph the old flange straight on and provide hole count, bore diameter and center spacing from the same datum. Those measured points let purchasing separate close housings without transferring hole data from another starter or assuming that a similar silhouette will bolt in.

Request a Wholesale Quote for VG1560090001-24V-8.5KW-10T-3.5M Heavy-Duty Starter Motor

For aftermarket wholesalers building a new starter range, discuss a VG1560090001-24V-8.5KW-10T-3.5M supply program with Elecdura by sending the OE reference, application, annual or initial quantity, destination and branding needs. The reply will identify the offered product version and agreed commercial options.