ELECDURA NETWORK
Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
S00005888+03
S00005888+03
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
S00005888+03
Weichai; 24V, 5.5kW, 10T, 40mm pinion reference
Confirm 10T pinion and 40mm reference, mounting face, drive reach and terminal orientation, 24V, 5.5kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
The S00005888+03 starter for Weichai is intended for replacement demand. It combines 24V, 5.5kW output with the 10T drive, allowing B2B buyers to keep the quotation tied to one application and physical configuration rather than a broad visual description.
Equipment dealer teams handling scheduled stock refill should send S00005888+03, the Weichai record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address clear lot-to-lot comparison, mixed-SKU export packing and the correct physical configuration in one useful commercial offer.
| Primary order identity | S00005888+03 |
| Target application | Weichai |
| Starter design | Dixie-type replacement |
| System voltage | 24V |
| Rated output | 5.5kW |
| Pinion identification | 10T / 40mm reference |
| OE / reference group | S00005888+03 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
Do not approve S00005888+03 from the label alone. Match 10T pinion and 40mm reference, mounting face, drive reach and terminal orientation, followed by the locating surface and drive projection. If one point differs, keep the unit on hold until the engine or machine record explains the difference.
A correct replacement must satisfy both the 24V 5.5kW electrical requirement and the 10T drive specification. Inspect the control-terminal connection and battery-cable route as part of the fit check rather than treating them as an after-installation detail.
Use S00005888+03 as the primary searchable order identity. If the label or service record shows an alternate reference, list its complete format and source on a separate RFQ line until voltage, output, drive and mounting have all been compared.
For scheduled stock refill, keep S00005888+03, Weichai, 24V, 5.5kW and 10T on one purchasing record. At goods-in, review old-unit photo linkage before releasing the lot. This gives the equipment dealer a documented basis for clear lot-to-lot comparison when the next order is raised.
Buyers can request neutral packing or discuss private-label presentation for suitable volumes. The usual minimum is 20 pieces and lead time is normally 7–15 days after confirmation, while freight options are selected from the destination, carton quantity and required arrival date.
Demand from a fleet powertrain store should keep S00005888+03 tied to Weichai. For scheduled stock refill, the equipment dealer can use a machine-down contingency stock, archive the carton and lot label and review old-unit photo linkage at goods-in. This supports clear lot-to-lot comparison while keeping mixed-SKU export packing visible.
Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep S00005888+03, Weichai and the confirmed physical configuration on the quotation.
Equipment dealer teams should tie S00005888+03 to Weichai, 24V, 5.5kW, 10T and the removed-unit photographs before requesting price. For scheduled stock refill, state quantity, destination and delivery timing, then review old-unit photo linkage. Ask Elecdura to address mixed-SKU export packing and clear lot-to-lot comparison in the same quotation.
Check the machine electrical system, old-starter label and service record before ordering. Keep 5.5kW, 10T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Retain S00005888+03 for clear lot-to-lot comparison and receiving review.
Compare 10T pinion and 40mm reference, mounting face, drive reach and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Keep S00005888+03 traceable through scheduled stock refill.
No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 40mm reference, solenoid position, terminals and 24V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. This supports clear lot-to-lot comparison for S00005888+03.
Use active Weichai customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Retain S00005888+03 for clear lot-to-lot comparison and receiving review.
Send the complete S00005888+03 reference, Weichai details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 5.5kW 10T unit, packing, lead time and freight in one focused offer. Link S00005888+03 photographs to the old-unit photo linkage record.
Use the full reference, Weichai application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Retain the S00005888+03 result for scheduled stock refill.
List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Link S00005888+03 photographs to the old-unit photo linkage record.
Email info@elecdurauto.com with S00005888+03, Weichai details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 5.5kW 10T offer, availability, packing, lead time and freight options.
