612600090129-24V-9.0KW-11T-3M Weichai Starter Motor

612600090129-24V-9.0KW-11T-3M Heavy-Duty Starter Motor for WEICHAI WD615

For wholesale program managers confirming an incoming batch, built for WEICHAI WD615, this heavy-duty starter motor combines 24V operation, 9.0kW rated power and a 11T drive. Elecdura supplies 612600090129-24V-9.0KW-11T-3M for commercial and off-highway replacement programs, including distributor stock and planned replenishment.

For sales teams preparing a volume quote, the product is positioned for professional aftermarket supply, with product identification, fitment boundaries, inspection options and commercial terms visible before the buyer requests pricing.

612600090129-24V-9.0KW-11T-3M Starter Motor Specifications and Technical Drawing

For purchasing teams separating similar housings, the 9.0kW output makes the electrical match especially important. Confirm the 24V system, cable capacity, grounds and the old starter rating before approving this configuration for a batch order.

For distributors evaluating a direct replacement, the source-faithful technical drawing records the available mounting information for 612600090129-24V-9.0KW-11T-3M, including 3×Ø11, Ø127, 47±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

612600090129-24V-9.0KW-11T-3M Aftermarket Replacement and Application

For service-parts networks confirming electrical ratings, 612600090129-24V-9.0KW-11T-3M, 612600090129 forms the usable OE and cross-reference group for this product, while WEICHAI WD615 is the stated application. Cross-reference numbers help buyers find the product, but a direct replacement should still agree on voltage, output, pinion and the visible mounting configuration.

For importers checking repeat-order specifications, product photos and the stated specifications should be reviewed together. If the old starter uses another pinion, mounting face or rear connection, keep that configuration on a separate RFQ until it is identified.

612600090129-24V-9.0KW-11T-3M Wholesale Supply for Distributors and Importers

For inventory buyers updating a customer item master, importers planning 612600090129-24V-9.0KW-11T-3M stock can request volume pricing, neutral or reviewed private-label packaging and agreed inspection records. Standard guidance is 20 pcs minimum, 7–15 days after confirmation and 18 months warranty under sales terms.

For fleet-parts buyers reviewing customer demand, Elecdura can align product identification, electrical testing and packaging records with the buyer's order. The exact inspection scope depends on the agreed quantity and market requirements and should be stated before production planning.

612600090129-24V-9.0KW-11T-3M Starter Motor Buyer FAQ

What should receiving teams compare on 612600090129-24V-9.0KW-11T-3M, 612600090129 when checking a replacement proposal?

For technical sales teams checking repeat-order specifications, 612600090129-24V-9.0KW-11T-3M, 612600090129 should be treated as one inquiry group only after the unit in hand is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate commercial line instead of assuming that the shared number guarantees interchangeability.

Which comparison prevents a mismatch for 11T and module 3 before a purchase order is released?

For fitment reviewers confirming the stated application, the supplied drive uses 11 teeth with module 3. Count the old pinion teeth and compare outside diameter, rest position and engagement depth before the PO is released. The 3 module is part of the gear definition, so another pitch must not be combined on the single RFQ position. This check protects the ring gear from an incorrect mesh.

Which check should lead 612600090129-24V-9.0KW-11T-3M three-view gallery before accepting a substitute?

For application specialists checking application evidence, use the drive-end view to compare the pinion and flange, the side profile to judge housing length and solenoid position, and the rear view to check terminals. All three images belong to 612600090129-24V-9.0KW-11T-3M; they should be reviewed together with the 11T drive and WEICHAI WD615 application. Request an additional close-up when the customer's unit hides a deciding feature.

Which comparison prevents a mismatch for 612600090129-24V-9.0KW-11T-3M order testing when checking a replacement proposal?

For sales teams building a new starter range, Elecdura can discuss armature, solenoid, no-load and load testing for 612600090129-24V-9.0KW-11T-3M. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 9.0kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

What evidence best identifies WEICHAI WD615 previously replaced starter for a first trade order?

For service-parts networks separating similar housings, ask whether the starter removed from WEICHAI WD615 is original or an earlier replacement. If it has been substituted before, the visible unit may not represent the equipment's initial build. Use its label and geometry together with 612600090129-24V-9.0KW-11T-3M, 24V, 9.0kW and 11T before turning that history into a bulk stocking decision.

How can a buyer screen 612600090129-24V-9.0KW-11T-3M terminal access when preparing a fitment request?

For importers evaluating a direct replacement, compare the rear housing and terminal direction in the approved product views for 612600090129-24V-9.0KW-11T-3M. The battery cable and start-signal lead must reach without sharp bends, rubbing or contact with hot and moving parts. If the body can be clocked differently within the same reference family, confirm the actual terminal position before stock is committed to the order.

Which check should lead 612600090129-24V-9.0KW-11T-3M replenishment for a first wholesale order?

For inventory buyers preparing distributor pricing, keep 612600090129-24V-9.0KW-11T-3M, 24V, 9.0kW, 11T, the application description and the agreed packaging on the same replenishment line. Add dated photos when the equipment fleet changes or a different existing starter appears. This gives purchasing and warehouse teams enough detail to avoid silently merging a new version into established stock.

How should a distributor confirm 24V and 9.0kW before stock is assigned?

For maintenance suppliers comparing nearby starter versions, 612600090129-24V-9.0KW-11T-3M is defined as 24V and 9.0kW. Confirm the machine electrical system and the old starter rating together, because the voltage must agree with the machine system while output affects cranking performance. Battery condition, cable size and ground integrity should also suit this rating; a different voltage or output is a separate product, even when the housings appear similar.

Request a Wholesale Quote for 612600090129-24V-9.0KW-11T-3M Heavy-Duty Starter Motor

For private-label buyers building a new starter range, to source 612600090129-24V-9.0KW-11T-3M for a distributor or importer program, send the OE group, WEICHAI WD615, planned volume and destination. Elecdura will confirm the quoted starter configuration, commercial terms and available inspection support.