Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
Weichai LG885
Weichai LG885
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
Weichai LG885
Weichai LG885; 24V, 8.5KW, 10T
Confirm 10T pinion, mounting face, drive reach and terminal orientation, 24V, 8.5KW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
Weichai LG885 supports commercial sourcing for Weichai LG885 with the application-matched replacement design. Buyers receive a clear 24V, 8.5KW and 10T specification that can be checked against the removed unit before quantity, packing and freight are finalized.
Stocking buyer teams handling sample validation should send Weichai LG885, the Weichai LG885 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address more reliable receiving checks, urgent dispatch options and the correct physical configuration in one useful commercial offer.
| Primary order identity | Weichai LG885 |
| Target application | Weichai LG885 |
| Starter design | application-matched replacement |
| System voltage | 24V |
| Rated output | 8.5KW |
| Pinion identification | 10T / confirm dimensions from the removed unit |
| OE / reference group | Weichai LG885 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
Compare 10T pinion, mounting face, drive reach and terminal orientation first, then inspect the housing clearance around the drive end. The purpose is to confirm how the unit mounts and engages, not merely whether it resembles another starter in the warehouse.
Alongside the mounting comparison, verify 24V, 8.5KW, 10T and the position of each connection. The combination provides a much safer purchasing identity than a single cross-reference, particularly for distributors supporting several engine or machine families.
When a buyer provides Weichai LG885, record whether the reference came from a label, invoice or service record, and keep the complete Weichai LG885 format on the quotation. The final choice must also agree with the actual application and physical unit.
For sample validation, keep Weichai LG885, Weichai LG885, 24V, 8.5KW and 10T on one purchasing record. At goods-in, review voltage marking and battery setup before releasing the lot. This gives the stocking buyer a documented basis for more reliable receiving checks when the next order is raised.
Elecdura supports qualified wholesale orders from 20 pieces, with normal preparation of 7–15 days after order confirmation and an 18-month warranty under agreed sales terms. Neutral packaging is available, and private-label requirements can be reviewed against order quantity, artwork and delivery schedule.
Demand from an off-highway repair network should keep Weichai LG885 tied to Weichai LG885. For sample validation, the stocking buyer can use a branch-specific reorder point, hold one incoming unit for comparison and review voltage marking and battery setup at goods-in. This supports more reliable receiving checks while keeping urgent dispatch options visible.
The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the Weichai LG885 application and specification shown above for their own product comparison.
Stocking buyer teams should tie Weichai LG885 to Weichai LG885, 24V, 8.5KW, 10T and the removed-unit photographs before requesting price. For sample validation, state quantity, destination and delivery timing, then review voltage marking and battery setup. Ask Elecdura to address urgent dispatch options and more reliable receiving checks in the same quotation.
Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Keep Weichai LG885 traceable through sample validation.
Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Retain the Weichai LG885 result for sample validation.
The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Weichai LG885, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Keep Weichai LG885 traceable through sample validation.
Send the complete Weichai LG885 reference, Weichai LG885 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 8.5KW 10T unit, packing, lead time and freight in one focused offer. Retain Weichai LG885 for more reliable receiving checks and receiving review.
Use the full reference, Weichai LG885 application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Use Weichai LG885 when arranging urgent dispatch options.
Check the machine electrical system, old-starter label and service record before ordering. Keep 8.5KW, 10T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Link Weichai LG885 photographs to the voltage marking and battery setup record.
Compare 10T pinion, mounting face, drive reach and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Use Weichai LG885 when arranging urgent dispatch options.
Email info@elecdurauto.com with Weichai LG885, Weichai LG885 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 8.5KW 10T offer, availability, packing, lead time and freight options.
