Z20040015C Weichai Starter Motor 24V 4.5kW 10T

Z20040015C Heavy-Duty Starter Motor for WEICHAI WP3Q130E50

For inventory buyers requesting production pricing, Z20040015C is an aftermarket heavy-duty starter motor for WEICHAI WP3Q130E50. Its 24V system, 4.5kW output and 10T pinion give heavy-duty parts distributors, importers and fleet suppliers a clear product definition for OE-reference replacement and repeat-order sourcing.

For fleet-parts buyers defining label requirements, importers can use the same reference and specification bundle from enquiry through receiving. That continuity helps sales, purchasing and warehouse teams keep a repeat-order item separate from similar housings with another electrical or drive configuration.

Z20040015C Starter Motor Specifications and Technical Drawing

For fleet-parts buyers checking repeat-order specifications, the product identity combines Z20040015C, WEICHAI WP3Q130E50, 24V, 4.5kW and 10T. Keeping those facts together helps buyers separate this starter from adjacent versions.

For technical sales teams matching the starter being replaced, the source-faithful technical drawing records the available mounting information for Z20040015C, including 3×Ø11.5, Ø127±0.125, 19±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

Z20040015C Aftermarket Replacement and Application

For equipment-parts dealers comparing the flange and terminals, send Z20040015C, M81R3010-R, the full WEICHAI WP3Q130E50 description and photos of the starter being removed. These details allow the quotation to stay product-specific when related numbers appear on more than one housing version.

For purchasing teams reviewing a replacement proposal, product photos and the stated specifications should be reviewed together. If the old starter uses another pinion, mounting face or rear connection, keep that configuration on a separate RFQ until it is identified.

Z20040015C Wholesale Supply for Distributors and Importers

For distributors updating a customer item master, wholesale enquiries for Z20040015C can combine product matching with packaging and inspection planning. Elecdura offers neutral packaging and private-label review for qualified orders, with 20 pcs MOQ, 7–15 days subject to confirmation and an 18-month warranty under agreed terms.

For aftermarket product managers preparing a volume quote, the order can specify testing scope, sampling level, label content and packing details. Reference-label, drive-end and terminal-protection photos may also be requested before shipment for the agreed product version.

Z20040015C Starter Motor Buyer FAQ

Which comparison prevents a mismatch for Z20040015C rear-terminal photograph when preparing a product enquiry?

For service-parts networks reviewing a replacement proposal, use the rear view of Z20040015C to identify battery and signal terminals, their direction and the clearance around each stud. Match the customer's photograph from the same orientation and consider cable routing in WEICHAI WP3Q130E50. A correct drive end with an unusable terminal position is not a complete fitment match.

Which comparison prevents a mismatch for 10T and module 3 for a documented fitment decision?

For importers confirming the stated application, the supplied drive uses 10 teeth with module 3. Count the old pinion teeth and compare outside diameter, rest position and engagement depth before ordering. The 3 module is part of the gear definition, so another pitch must not be combined on the single purchase line. This check protects the ring gear from an incorrect mesh.

Which comparison prevents a mismatch for 3×Ø11.5, Ø127±0.125 and 19±1 mm when several versions look alike?

For product managers checking version-defining data, use the supplied technical drawing to compare 3×Ø11.5, Ø127±0.125 and 19±1 mm. Take each measurement from the same face shown or described, then compare the locating shoulder, bolt pattern and drive-end projection as one set. A single matching diameter is not enough if the hole pattern or axial reach places the pinion differently.

How should a distributor confirm 24V and 4.5kW when several versions look alike?

For maintenance suppliers confirming electrical ratings, Z20040015C is defined as 24V and 4.5kW. Confirm the machine electrical system and the old starter rating together, because system voltage establishes electrical compatibility while output affects cranking performance. Battery condition, cable size and ground integrity should also suit this rating; a different voltage or output is a separate product, even when the housings appear similar.

How should a workshop distinguish module 3 during an application review?

For equipment-parts dealers checking repeat-order specifications, module 3 is part of the gear geometry for Z20040015C. Confirm it together with the 10-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

What evidence best identifies 24V system compatibility during fitment review?

For purchasing teams matching the unit taken from service, Z20040015C is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement ahead of the order. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

What should purchasing verify first for Z20040015C locating face before accepting a substitute?

For distributors reviewing drive-end geometry, the Z20040015C flange should sit flat against the WEICHAI WP3Q130E50 mounting surface without being pulled into place by the bolts. Clean both faces and compare the locating shoulder, hole pattern and any stated diameters. Rocking, a visible gap or bolt misalignment indicates that the version check is incomplete and installation should stop.

Which comparison prevents a mismatch for WEICHAI WP3Q130E50 cranking condition before an installation slot is booked?

For technical buyers preparing an OE-based quote, before replacing the starter on WEICHAI WP3Q130E50, test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 24V, 4.5kW starter and make a fitment request easier to resolve.

Request a Wholesale Quote for Z20040015C Heavy-Duty Starter Motor

For engine-parts specialists planning a repeat order, prepare the RFQ with Z20040015C, M81R3010-R, the complete application, quantity, target delivery and packaging requirements. We will respond with the defined 24V 4.5kW 10T starter motor line rather than a generic substitute.