VG1560090001-24V-8.0KW-10T-3.5M Weichai Starter Motor

VG1560090001-24V-8.0KW-10T-3.5M Heavy-Duty Starter Motor for WEICHAI WD615 (large 10-tooth version)

For purchasing teams confirming an incoming batch, this heavy-duty starter motor serves WEICHAI WD615 (large 10-tooth version) replacement demand under reference VG1560090001-24V-8.0KW-10T-3.5M. Its 24V system, 8.0kW rating and 10T drive help importers and distributors identify the required version before discussing volume supply.

For distributors preparing a volume quote, the commercial value is a clearly identified starter rather than a generic visual match. Buyers can use the OE group, application, product images and technical data together, while neutral packaging and private-label review can be discussed for qualified bulk orders.

VG1560090001-24V-8.0KW-10T-3.5M Starter Motor Specifications and Technical Drawing

For application specialists checking repeat-order specifications, this reference group can cover nearby starter versions. Keep VG1560090001-24V-8.0KW-10T-3.5M, 24V, 8.0kW and 10T together on the RFQ, then compare the flange, drive end and terminal layout before treating another number as a direct replacement.

For replacement-parts sellers matching the old starter, the source-faithful technical drawing records the available mounting information for VG1560090001-24V-8.0KW-10T-3.5M, including 3×Ø11, Ø88.9; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

VG1560090001-24V-8.0KW-10T-3.5M Aftermarket Replacement and Application

For technical buyers comparing the flange and terminals, the replacement search starts with VG1560090001-24V-8.0KW-10T-3.5M, VG1560090001, AZF11.131.564 and the WEICHAI WD615 (large 10-tooth version) application. For mixed fleets or previously repaired machines, add clear old-unit photos so a substituted starter does not become the only fitment evidence.

For engine-parts specialists reviewing a replacement proposal, A direct replacement decision should combine the OE group with physical comparison. Check the mounting face, 10T drive and cable-stud direction, and ask for a separate review when one of those features differs.

VG1560090001-24V-8.0KW-10T-3.5M Wholesale Supply for Distributors and Importers

For regional parts suppliers updating a customer item master, Elecdura supports repeat-order and new-line sourcing for VG1560090001-24V-8.0KW-10T-3.5M. Commercial planning can cover a 20 pcs MOQ, 7–15 day lead time subject to confirmation, neutral packaging or private-label review, and an 18-month agreed warranty.

For aftermarket wholesalers reviewing customer demand, Elecdura can align product identification, electrical testing and packaging records with the buyer's order. The exact inspection scope depends on the agreed quantity and market requirements and should be stated before production planning.

VG1560090001-24V-8.0KW-10T-3.5M Starter Motor Buyer FAQ

How should a distributor confirm 3×Ø11 before a purchase order is released?

For maintenance suppliers reviewing a replacement proposal, the drawing lists 3×Ø11 for VG1560090001-24V-8.0KW-10T-3.5M. Count the holes, measure their diameters and compare their positions from the locating face. A matching outer housing does not compensate for a hole pattern that will not seat squarely, so flange geometry should pass before the starter reaches the installation bay.

Which specification deserves priority for VG1560090001-24V-8.0KW-10T-3.5M drive-end photograph when preparing a technical inquiry?

For equipment-parts dealers confirming the stated application, the drive-end image for VG1560090001-24V-8.0KW-10T-3.5M should be used to count 10 teeth and compare the flange, locating shoulder and pinion rest position. View the customer's old starter from the same angle and lighting. A profile photograph may not show the drive teeth and mounting points clearly; a frontal image is better for the final comparison.

How can a buyer screen VG1560090001-24V-8.0KW-10T-3.5M order testing before an installation slot is booked?

For purchasing teams reviewing customer demand, Elecdura can discuss armature, solenoid, no-load and load testing for VG1560090001-24V-8.0KW-10T-3.5M. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 8.0kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

Which specification deserves priority for VG1560090001-24V-8.0KW-10T-3.5M technical claim evidence for a documented fitment decision?

For distributors building a new starter range, retain the unit label, affected quantity, carton condition, installation photos and cranking-voltage results. Add close images of the drive and terminals and note the WEICHAI WD615 (large 10-tooth version) equipment. This evidence helps separate transport damage, an electrical-system problem, incorrect fitment and a starter fault without relying on a general description of failure.

How can a buyer screen 10T and module 3.5 for a documented fitment decision?

For technical buyers checking repeat-order specifications, the supplied drive uses 10 teeth with module 3.5. Count the old pinion teeth and compare outside diameter, rest position and engagement depth during pre-order review. The 3.5 module is part of the gear definition, so another pitch must not be combined on the shared order line. This check protects the ring gear from an incorrect mesh.

Which detail separates 24V system compatibility during fitment review?

For engine-parts specialists matching the old starter, VG1560090001-24V-8.0KW-10T-3.5M is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement ahead of the order. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

Which detail separates VG1560090001-24V-8.0KW-10T-3.5M among Weichai versions during an application review?

For fleet-parts buyers reviewing drive-end geometry, VG1560090001-24V-8.0KW-10T-3.5M should remain separate from another Weichai starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 24V, 8.0kW and 10T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

Which check should lead WEICHAI WD615 (large 10-tooth version) before accepting a substitute?

For technical sales teams comparing nearby starter versions, WEICHAI WD615 (large 10-tooth version) identifies the intended heavy-duty engine family, but it should not be used by itself. Pair the application with VG1560090001-24V-8.0KW-10T-3.5M, the 24V electrical system and the 10-tooth drive. That combination lets purchasing exclude nearby versions used on another engine build, chassis revision or equipment configuration before agreeing cost and lead time.

Request a Wholesale Quote for VG1560090001-24V-8.0KW-10T-3.5M Heavy-Duty Starter Motor

For sourcing managers planning a repeat order, request pricing for VG1560090001-24V-8.0KW-10T-3.5M by sharing the application, quantity, delivery country and any neutral or private-label packaging needs. Clear label, drive-end, flange and terminal photos help confirm the exact starter before the offer is issued.