28100-2862 Hino K13C K13D Starter Motor Distributor

28100-2862 Hino K13 Starter Supply for Regional Distributors

K13C and K13D customers may quote 28100-2862, a suffix variant or only a Sawafuji number. Recording the engine version and compact triangular nose lets the sales desk turn that incomplete request into a defined distributor line.

This starter sits close to P11C products in the public reference market. The lower-centered mounting ear, Ø121 locating section, 20 mm pinion position and terminal bridge should be compared before assigning stock.

28100-2862 6.0kW Specification and Triangular Face Drawing

The supplier-defined set is 24V, 6.0kW, 11T, module 3.5 and clockwise rotation. These five values belong on the quotation together, especially where neighboring Hino listings show another output.

28100-2862 Hino K13C K13D Starter Dimensions for Fleet Buyers — compare the drawing with the removed starter before placing a volume order.

Check the Ø121 locating reference, 20 mm pinion position, 48 mm axial housing reference, three Ø16 holes and Ø159.5 envelope. A straight front view makes the lower ear and two upper holes easier to distinguish from the P11C face.

28100-2862 Cross-Reference Separation for K13 Engine Orders

Use 28100-2862, its A suffix, 2863, 2865A, 601124A, 19102N and 0365-602 numbers to widen the search. Then narrow the sale to the K13C or K13D/E13C engine and the accepted physical version.

A distributor can serve K13C and K13D customers from this line only when the mounting and rating evidence match. Record the engine on each quote so a later P11C or 390HP request does not inherit this product automatically.

28100-2862 Receiving Checks and Factory Testing Video

Receiving staff should compare the triangular face, 11T pinion, cable and solenoid arrangement, rear housing and label on sampled cartons. Stable bin labels can show 28100-2862 plus K13C/K13D rather than a broad Hino starter name.

Elecdura's video introduces assembly and electrical testing for export starters. It supports supplier review while the wholesale line stays tied to 28100-2862-specific K13 fitment, packaging, sample inspection and branch allocation.

28100-2862 Starter Motor FAQs for Hino K13 Distributors

How should buyers identify K13C versus K13D in a 28100-2862 request?

For dimensional review, include the engine or machine model, old-starter numbers, mounting photographs, the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine, quantity, packing request and destination. Pair the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine with the 24V, 6.0kW, 11T, module 3.5 and CW rotation set in purchasing and receiving records.

What does the lower-centered mounting ear help confirm on 28100-2862?

For inventory identification, compare the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine with the removed starter, using the drawing and square photographs rather than judging the housing from one angled view. This checks the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine while preserving the 24V, 6.0kW, 11T, module 3.5 and CW rotation definition for the buyer.

How should 0365-602 references be used when sourcing 28100-2862?

For reference review, use 0365-602 and 28100-2862 as search references for Hino K13C and K13D heavy-truck engines, then keep the exact physical comparison attached to 28100-2862. For 28100-2862, physical evidence must support the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine and the 24V, 6.0kW, 11T, module 3.5 and CW rotation combination.

Can a related P11C listing prove interchangeability with 28100-2862?

For electrical diagnosis, no. For Hino K13C and K13D heavy-truck engines, the shared reference group can support discovery, but it cannot prove that the housing, drive end and application are interchangeable. Keep 28100-2862, the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine and 24V, 6.0kW, 11T, module 3.5 and CW rotation together from enquiry through receiving.

How should distributors label 28100-2862 K13 stock?

For incoming inspection, label each bin and carton for Hino K13C and K13D heavy-truck engines with 28100-2862, the electrical rating, pinion and housing version instead of a broad engine-family name. Compare the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine, then carry 24V, 6.0kW, 11T, module 3.5 and CW rotation into the purchase order and stock description.

Which physical features deserve sampling on the first K13 shipment?

For delivery planning, compare the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine with the removed starter, using the drawing and square photographs rather than judging the housing from one angled view. A dependable 28100-2862 match combines the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine with 24V, 6.0kW, 11T, module 3.5 and CW rotation, not one visible feature.

What battery and cable tests matter before replacing a K13 starter?

For quotation preparation, check batteries under load, cable voltage drop, grounds, relay operation and the ring gear before replacing the starter matched to the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine. This ties the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine to 24V, 6.0kW, 11T, module 3.5 and CW rotation when the item moves into branch stock.

Which records should accompany a 28100-2862 distributor enquiry?

For application screening, include the engine or machine model, old-starter numbers, mounting photographs, the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine, quantity, packing request and destination. Confirm the lower-centered three-point face, Ø121 locating section, 11T pinion and K13 engine and keep the 24V, 6.0kW, 11T, module 3.5 and CW rotation values visible on the quotation.

Request 28100-2862 Hino K13 Starter Motor Distributor Terms

Send the Hino model, K13C or K13D/E13C engine plate, every readable starter number, drive-end and terminal photographs, expected volume and destination to info@elecdurauto.com. Elecdura will review 28100-2862 and return distributor terms.