8200214 Volvo D13 Mack MP8 Starter Motor Wholesale

8200214 Starter Motor Distributor Application Guide for Volvo D13 and related Mack MP8

For a fleet parts team, 8200214 identifies one Volvo D13 and related Mack MP8 requirement. The Volvo D13 and Mack MP8 12-tooth interface with the terminal layout shown provides a clear fitment boundary for sample, stock and replacement reviews.

A useful enquiry pairs 8200214 with the equipment record, old-starter label and clear front, side and terminal images. Add the order quantity, destination and required date so technical selection, sample planning, carton marking and freight options can be addressed in one response.

8200214 Starter Motor Mounting Dimensions for Distributor Approval

8200214 Volvo D13 Mack MP8 12V 7.3kW 12T starter dimensions.

Use the 8200214 technical drawing to check Ø92 locating diameter, 47 mm distance to drive gear and Ø146 mounting-hole circle. Add the 3 × Ø17 mounting holes to the receiving sheet. These are practical controls for an approved sample because they can be measured before the starter is installed or released to branch stock.

Complete the 8200214 comparison with 12V, 7.3kW, the 12T drive, module 3.175 and CW rotation. Review pinion condition, terminal location and available cable clearance together. These controls prevent a valid OE search result from being treated as automatic physical interchangeability.

8200214 Starter Motor Reference Group for Wholesale Sourcing

• Use the full number: Start with 8200214, 8200417, 8200572, 8200611, 8200909, 8200910, retaining prefixes, suffixes and separators in the RFQ.

• Confirm the hardware: The final match requires the stated electrical rating, drive, mounting interface and terminal side; unmatched versions should remain separate.

8200214 Starter Motor Distributor Stock and Delivery Support

MOQ begins at 20 pieces, with normal lead time of 7–15 days after order confirmation and an 18-month warranty under agreed terms. For 8200214, the offer can distinguish samples, available stock and production quantities while confirming carton protection and the shipment plan for the destination.

Tie each quotation to engine generation and complete Volvo or Mack OE suffix because the reference family spans more than one service version. Once that boundary is fixed, purchasing can separate urgent units from routine replenishment and define branch quantities, stock labels and freight timing without encouraging an unverified substitute.

Elecdura’s video shows starter-motor production and electrical testing used to support wholesale orders. It provides supplier-capability context for 8200214; the product decision itself still depends on the complete reference, 12V 7.3kW rating, drive end, mounting face and terminal layout.

8200214 Starter Motor Questions from Commercial Buyers

Which photographs and readings help Elecdura review 8200214 after installation in a Volvo D13 Mack MP8 branch review?

Keep the carton or product traceability code and note when and where 8200214 was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete evidence allows technical support to respond without repeated requests for basic information.

Can 8200214 be selected from the application name alone during branch sourcing?

Confirm 8200214 against the complete OE number, the stated Volvo D13 and related Mack MP8 use and clear front, side and terminal photographs. The decisive points are 12T, 3 × Ø17 mounting holes and 47 mm distance to drive gear. Those controls keep visually related starters from being combined in one order.

Which checks should follow an OE-number match for 8200214 in a Volvo D13 Mack MP8 branch sourcing program?

A number match narrows the search but does not finish it. For 8200214, compare the stated application, electrical output, 12T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

Which cranking-circuit tests should precede replacement of 8200214 in a Volvo D13 Mack MP8 branch workshop?

Load-test the battery set and measure voltage drop on the positive and ground circuits while cranking. Inspect cable lugs, chassis grounds, the start-control signal and ring-gear condition before replacing 8200214. These checks distinguish a starter fault from low battery capacity, resistance or a control-circuit problem.

Which mounting-face points distinguish the specified 8200214 version during a Volvo D13 Mack MP8 branch inspection?

Place the removed starter and 8200214 on the same mounting-face orientation. Compare Ø92 locating diameter, Ø146 mounting-hole circle, the 3 × Ø17 mounting holes and the 47 mm distance to drive gear. The drawing is a dimensional reference rather than a scale template, so use suitable measuring tools and verify the terminals separately.

How can 8200214 stock be separated by application risk in a Volvo D13 Mack MP8 branch program?

Separate planned maintenance demand from breakdown coverage and new-account stock. Share the number of supported machines, recent 8200214 usage, transfer time between branches and the desired reserve. The resulting order can combine immediate units and scheduled replenishment while keeping the application and physical specification clearly identified.

Which first-lot checks protect a distributor receiving 8200214 during a Volvo D13 Mack MP8 branch receiving check?

For 8200214, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 3 × Ø17 mounting holes, Ø92 locating diameter and the specified 12T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

Which commercial details belong in an export enquiry for 8200214 in a Volvo D13 Mack MP8 branch sourcing program?

Send the complete OE number, exact Volvo D13 and related Mack MP8 details, removed-unit photographs, quantity and destination. Add the required arrival date, carton marking, payment preference and any sample request. Elecdura can then quote the specified 12V 7.3kW 12T CW starter with packing, lead time, warranty and freight options.

8200214 Send a Starter Motor Distributor Enquiry

For a focused 8200214 quotation, share the machine or engine record, old-starter number, mounting and terminal images, order volume, delivery country and timing. You can email the RFQ directly to info@elecdurauto.com; Elecdura will reply with the matching specification, availability, packing and commercial terms.