S0736S Volvo TD60A Fiat Starter Motor Wholesale

S0736S Starter Motor Wholesale Application Support for Volvo TD60A and Fiat CP3-100

For Volvo TD60A and Fiat CP3-100, S0736S gives distributors a focused starting point for quotation and branch inventory. Confirm 12V, 3.0kW, 9T and CW, with particular attention to 12V 3.0kW 9T catalog configuration for the TD60A and CP3-100 group, before combining demand from different fleets or workshops.

Send the full S0736S application and old-unit identification rather than only a truck or engine brand. With mounting and terminal photos, quantity, destination and arrival target, Elecdura can discuss the correct starter, MOQ, packing, warranty and shipping route without unnecessary follow-up.

S0736S Starter Motor Drive-End Drawing for Aftermarket Distributors

S0736S Volvo TD60A and Fiat CP3-100 12V 3.0kW 9T starter mounting dimensions.

The S0736S dimensional review starts at the mounting face: verify 3 mounting holes shown as 11, 11, 11 mm, Ø127 mm mounting-hole circle and Ø89 mm locating diameter. Then compare the 48 mm drive-end distance. The drawing is not a scale template, so record actual measurements and review terminal orientation separately.

For S0736S, record 9T, CW, 12V and 3.0kW, including module 3. Inspect the pinion, solenoid orientation and terminal access from the same side as the removed unit. A first sample should pass both the label check and this physical comparison.

S0736S Starter Motor OE Number Guide for Aftermarket Supply

The S0736S cross-reference group includes S0736S, 0001359118, 0001367026, 0001367073, 0986012750, 11.130.688, AZJ3232. Use these numbers to search supplier systems, then confirm 12V, 3.0kW, 9T, CW, mounting geometry and terminals.

For S0736S, list and photograph each complete reference when pinions, drive positions or connectors differ. Elecdura can quote each physical starter independently.

S0736S Starter Motor Wholesale Ordering and Export Support

MOQ begins at 20 pieces, with normal lead time of 7–15 days after order confirmation and an 18-month warranty under agreed terms. For S0736S, the offer can distinguish samples, available stock and production quantities while confirming carton protection and the shipment plan for the destination.

Keep Volvo and Fiat application lines distinct on distributor reorders. Buyers should also state whether the order supports a single workshop, several branches or a fleet contract, allowing samples, safety stock, carton labels and staged dispatch to be planned around the actual service requirement.

The video introduces Elecdura starter-motor assembly and electrical testing for B2B supply programs. Selection of S0736S remains tied to the stated Volvo TD60A and Fiat CP3-100 application, 9T drive, mounting interface and terminals, while the video helps distributor teams review production and testing capability.

S0736S Starter Motor Questions from Commercial Buyers

What traceability details should accompany a warranty enquiry for S0736S in a Volvo TD60A Fiat service-network review?

Keep the carton or product traceability code and note when and where S0736S was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete records allow technical support to respond without repeated requests for basic information.

Which electrical conditions can imitate a failed S0736S starter motor during a Volvo TD60A Fiat service-network electrical check?

Before fitting S0736S, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.

Which details separate S0736S from similar starters used around Volvo TD60A and Fiat CP3-100 during service-network sourcing?

For S0736S, ask the workshop for the removed starter label and the exact equipment record. Match 12V, 3.0kW, 9T and CW, then compare the locating diameter, mounting holes and terminals. If one of those items changes, request another quotation instead of accepting the similar housing.

Can a purchasing team consolidate every S0736S reference into one stock line in a Volvo TD60A Fiat service-network sourcing program?

The references identify a related sourcing family, not automatic interchangeability. Use S0736S, 0001359118, 0001367026, 0001367073, 0986012750 to locate possible matches, then confirm 12V, 3.0kW, 9T, CW and the mounting face. Any difference in drive position, terminal layout or locating diameter requires a separate product decision.

Why is a straight mounting-face photo useful for confirming S0736S during a Volvo TD60A Fiat service-network inspection?

Align the removed starter and S0736S at the mounting face. Compare Ø89 mm locating diameter, Ø127 mm mounting-hole circle, 3 mounting holes shown as 11, 11, 11 mm and 48 mm drive-end distance. Use the drawing for dimensions, measure with suitable tools and check terminals separately.

Can urgent service demand and routine S0736S replenishment share one enquiry in a Volvo TD60A Fiat service-network program?

Separate planned maintenance demand from breakdown coverage and new-account stock. Share the number of supported machines, recent S0736S usage, transfer time between branches and the desired reserve. The resulting order can combine immediate units and scheduled replenishment while keeping the application and physical specification clearly identified.

How can a buyer quarantine a mismatched S0736S unit quickly during a Volvo TD60A Fiat service-network receiving check?

For S0736S, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 3 mounting holes shown as 11, 11, 11 mm, Ø89 mm locating diameter and the specified 9T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

What should be included in a wholesale enquiry for S0736S in a Volvo TD60A Fiat service-network sourcing program?

Send the complete OE number, exact Volvo TD60A and Fiat CP3-100 details, removed-unit photographs, quantity and destination. Add the required arrival date, carton marking, payment preference and any sample request. Elecdura can then quote the specified 12V 3.0kW 9T CW starter with packing, lead time, warranty and freight options.

S0736S Request Starter Motor Wholesale Pricing

Send the complete S0736S reference, Volvo TD60A and Fiat CP3-100 details, removed-unit label and photographs, quantity, destination and required arrival date. Email info@elecdurauto.com to discuss the specified 12V, 3.0kW, 9T CW starter, MOQ, packing, lead time, warranty and freight.