M008T80872 Volvo Starter Motor 24V 5.0kW 9T

M008T80872 Heavy-Duty Truck Starter Motor for D3.8E (VOLVO 120)

For private-label buyers opening a first bulk order, M008T80872 is an aftermarket heavy-duty truck starter motor for D3.8E (VOLVO 120). Its 24V system, 5.0kW output and 9T pinion give commercial-vehicle distributors, fleet-parts suppliers and importers a clear product definition for OE-reference replacement and repeat-order sourcing.

For purchasing teams confirming an incoming batch, importers can use the same reference and specification bundle from enquiry through receiving. That continuity helps sales, purchasing and warehouse teams keep a repeat-order item separate from similar housings with another electrical or drive configuration.

M008T80872 Starter Motor Specifications and Technical Drawing

For fitment reviewers confirming electrical ratings, the 9T pinion is a fast visual identifier, but the purchase decision should also retain 24V, 5.0kW, the mounting geometry and terminal position.

For application specialists checking repeat-order specifications, the source-faithful technical drawing records the available mounting information for M008T80872, including Ø105; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

M008T80872 Aftermarket Replacement and Application

For distributors checking version-defining data, use M008T80872 as the primary product identity for D3.8E (VOLVO 120). The cross-reference group M008T80872, 1K011-63013 supports aftermarket matching, while the electrical rating and drive-end configuration distinguish the exact version supplied here.

For technical buyers comparing the flange and terminals, do not merge a similarly shaped unit into this order only because the main number is related. The 9T drive, module 3, flange and terminals should agree with the version shown here.

M008T80872 Wholesale Supply for Distributors and Importers

For engine-parts specialists planning mixed-model inventory, importers planning M008T80872 stock can request volume pricing, neutral or reviewed private-label packaging and agreed inspection records. Standard guidance is 20 pcs minimum, 7–15 days after confirmation and 18 months warranty under sales terms.

For regional parts suppliers updating a customer item master, batch consistency should be controlled through the agreed reference, electrical rating, pinion, packaging and inspection points. Elecdura can discuss test documentation and pre-shipment photos that match the needs of the distributor or importer.

M008T80872 Starter Motor Buyer FAQ

How should a workshop distinguish D3.8E (VOLVO 120) previously replaced starter during an application review?

For product managers comparing the flange and terminals, ask whether the starter removed from D3.8E (VOLVO 120) is original or an earlier replacement. If it has been substituted before, the visible unit may not represent the equipment's initial build. Use its label and geometry together with M008T80872, 24V, 5.0kW and 9T before turning that history into a bulk stocking decision.

How should a distributor confirm M008T80872, 1K011-63013 when several versions look alike?

For maintenance suppliers reviewing a replacement proposal, M008T80872, 1K011-63013 should be treated as one inquiry group only after the starter being replaced is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate quotation line instead of assuming that the shared number guarantees interchangeability.

How should a workshop distinguish M008T80872 carton identification for repeatable sourcing?

For private-label buyers updating a customer item master, ask that unit and carton labels repeat the agreed reference, 24V, 5.0kW and 9T where the packaging format permits. Add the customer's barcode and destination marks before production. Clear identification allows distributors to receive, bin and pick this version without opening packaging or relying on a generic starter description.

What should receiving teams compare on Ø105 for a documented fitment decision?

For purchasing teams checking application evidence, use the supplied technical drawing to compare Ø105. Take each measurement from the same face shown or described, then compare the locating shoulder, bolt pattern and drive-end projection as one set. A single matching diameter is not enough if the hole pattern or axial reach places the pinion differently.

How should a workshop distinguish M008T80872 among Volvo versions for repeatable sourcing?

For distributors preparing an OE-based quote, M008T80872 should remain separate from another Volvo starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 24V, 5.0kW and 9T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

How can a buyer screen flange clocking before accepting a substitute?

For technical buyers checking repeat-order specifications, no separate angular callout is stated for M008T80872. Align the old and offered starters by the locating face, then photograph bolt positions and terminal clocking from matching viewpoints. This provides a usable orientation check for the purchasing team without assigning an angle taken from another model that only shares a similar flange outline.

What evidence best identifies M008T80872 three-view gallery during fitment review?

For engine-parts specialists matching the starter being replaced, use the drive-end view to compare the pinion and flange, the side profile to judge housing length and solenoid position, and the rear view to check terminals. All three images belong to M008T80872; they should be reviewed together with the 9T drive and D3.8E (VOLVO 120) application. Request an additional close-up when the customer's unit hides a deciding feature.

How should a workshop distinguish 24V system compatibility when the starter being replaced is available?

For fleet-parts buyers reviewing drive-end geometry, M008T80872 is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement at inquiry stage. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

Request a Wholesale Quote for M008T80872 Heavy-Duty Truck Starter Motor

For aftermarket wholesalers reviewing customer demand, send M008T80872, 1K011-63013, the D3.8E (VOLVO 120) application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 5.0kW, 9T version and prepare a product-specific wholesale quotation.