M105R3002SE Steyr WP10 Starter Motor Wholesale

M105R3002SE Starter Motor Fleet Replacement Supply for Beifang Benz and Steyr trucks with WP10 or WD618 engines

M105R3002SE supports Beifang Benz and Steyr trucks with WP10 or WD618 engines sourcing where buyers need a defined electrical and drive-end match. Its 24V, 7.5kW, 11T CW specification must remain linked to the 24V 7.5kW 11T module-3 WP10/WD618 specified configuration; a visually related unit may belong on a different RFQ line.

Before comparing M105R3002SE prices, state whether the request covers an initial sample, urgent breakdown demand or routine distributor replenishment. Include the full OE reference, application, photographs, quantity and destination so the offer remains connected to the physical unit the customer expects to receive.

M105R3002SE Starter Motor Technical Data for Fleet Parts Buyers

A warehouse can confirm the M105R3002SE interface without dismantling the unit. Measure Ø89 mm locating diameter and Ø127 mm mounting-hole circle, inspect 3 mounting holes shown as 11, 11, 11 mm, then verify the 47 mm drive-end distance. Photograph the pinion and terminal side so workshop staff can review details that a carton label cannot show.

For M105R3002SE, count the 11T pinion and confirm module 3, CW rotation, 24V and 7.5kW. The terminal side and solenoid clearance must also agree with the installation. A different pinion or cable position should be quoted separately, even when major cross-references overlap.

M105R3002SE Starter Motor Reference Matching for B2B Quotations

The M105R3002SE cross-reference group includes 11132049, 11132090, IS1325, STM3502MH, STP3502MH, M105R3002SE, HG1500090018. Use these numbers to search supplier systems, then confirm 24V, 7.5kW, 11T, CW, mounting geometry and terminals.

For M105R3002SE, list and photograph each complete reference when pinions, drive positions or connectors differ. Elecdura can quote each physical starter independently.

M105R3002SE Starter Motor Wholesale Supply and Export Planning

Wholesale planning for M105R3002SE can cover a sample stage, routine replenishment and urgent service demand. Elecdura normally works from 20 pieces, confirms a 7–15 day lead time after order approval and provides an 18-month warranty under the agreed commercial terms.

Tie the Prestolite number to WP10 or WD618 and the specified 11T drive. Once that boundary is fixed, purchasing can separate urgent units from routine replenishment and define branch quantities, stock labels and freight timing without encouraging an unverified substitute.

The video introduces Elecdura starter-motor assembly and electrical testing for B2B supply programs. Selection of M105R3002SE remains tied to the stated Beifang Benz and Steyr trucks with WP10 or WD618 engines application, 11T drive, mounting interface and terminals, while the video helps distributor teams review production and testing capability.

M105R3002SE Starter Motor Questions from Commercial Buyers

How should a buyer request samples and bulk pricing for M105R3002SE in a Steyr WP10 workshop sourcing program?

Provide the full reference and application, not only a broad brand name. Attach front, side and terminal views of the removed starter and state quantity, destination, required date and packaging needs. For M105R3002SE, Elecdura will respond with the matching specification, MOQ, availability, commercial terms and freight choices.

How should buyers use the M105R3002SE cross-reference group in a Steyr WP10 workshop sourcing program?

A number match narrows the search but does not finish it. For M105R3002SE, compare the stated application, electrical output, 11T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

What fitment evidence makes a quotation for M105R3002SE reliable during workshop sourcing?

Use the full old-unit number and Beifang Benz and Steyr trucks with WP10 or WD618 engines record. Compare the 11T pinion, 3 mounting holes shown as 11, 11, 11 mm, Ø89 mm locating diameter and terminal side. Reject a candidate when its drive position, mounting face or cable connection differs.

What pre-installation circuit review supports replacement with M105R3002SE during a Steyr WP10 workshop diagnosis?

Record battery voltage at rest and during the start attempt, then test both main cables under load. Check grounds, terminal tightness and the control feed to the solenoid. Supplying those readings with an enquiry for M105R3002SE helps the workshop avoid replacing a sound starter when the actual fault is elsewhere.

What should be measured on the drive end before releasing M105R3002SE to stock during a Steyr WP10 workshop inspection?

For M105R3002SE, check 3 mounting holes shown as 11, 11, 11 mm, Ø89 mm locating diameter and 47 mm drive-end distance. Record the 11T pinion, rotation and terminal position so the warehouse can isolate a mixed or incorrectly labelled unit before dispatch.

What should an importer include in the replenishment forecast for M105R3002SE in a Steyr WP10 workshop program?

Build the forecast around actual equipment counts, failure history and the time needed to replenish each service location. For M105R3002SE, keep the specified pinion and mounting interface visible in the stock record. This reduces emergency substitutions and gives purchasing a clearer basis for MOQ, packing and delivery discussions.

What should a warehouse inspect when M105R3002SE starter motors arrive during a Steyr WP10 workshop receiving check?

For M105R3002SE, match carton and product labels to the purchase order, then sample 24V, 11T, 3 mounting holes shown as 11, 11, 11 mm and terminal protection. Check the flange and pinion for shipping damage. Record lot numbers and arrival photographs, and isolate any different configuration before it is placed in saleable stock.

What traceability details should accompany a warranty enquiry for M105R3002SE in a Steyr WP10 workshop review?

Keep the carton or product traceability code and note when and where M105R3002SE was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete records allow technical support to respond without repeated requests for basic information.

M105R3002SE Request Starter Motor Wholesale Pricing

A complete RFQ for M105R3002SE should state the application, removed-unit number, physical photographs, quantity, destination and delivery target. Send these details to info@elecdurauto.com for a direct response on the correct 24V 7.5kW 11T CW starter, MOQ, packaging, warranty and shipping choices.