0-23000-1751 Komatsu PC200-5 24V 5.5kW Starter Motor B2B Supply

0-23000-1751 Komatsu PC200-5 Starter Motor B2B Purchasing Overview

Elecdura supplies 0-23000-1751 for Komatsu PC200-5 to parts distributors, rebuilders and fleet-service buyers. This Sawafuji-type replacement is specified as 24V, 5.5kW and 11T; keeping those facts beside the application makes sample comparison and repeat purchasing more consistent.

Branch inventory manager teams handling engine-overhaul planning should send 0-23000-1751, the Komatsu PC200-5 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address clear lot-to-lot comparison, repeat-order carton marks and the correct physical configuration in one useful commercial offer.

0-23000-1751 Starter Motor Wholesale Mounting and Electrical Checks

Start the physical comparison with 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation. Use a straight view of the mounting face and a side view parallel to the shaft so perspective does not hide the flange-to-pinion relationship. A close body shape, paint color or solenoid size is not enough to establish interchangeability.

The 5.5kW output and 11T drive belong together with 24V. Record all three rather than quoting power alone, and include a terminal-side photograph so the B+ cable, control wire and nearby clearances can be reviewed before shipment.

0-23000-1751 Starter Motor Cross-References for Wholesale Supply

Treat 0-23000-1751 as the commercial anchor for this Komatsu PC200-5 starter. Keep any additional reference available for lookup, while using voltage, output, pinion, mounting face and terminals to decide whether a proposed alternative belongs on the same order.

For engine-overhaul planning, keep 0-23000-1751, Komatsu PC200-5, 24V, 5.5kW and 11T on one purchasing record. At goods-in, review old-unit photo linkage before releasing the lot. This gives the branch inventory manager a documented basis for clear lot-to-lot comparison when the next order is raised.

0-23000-1751 Starter Motor Wholesale Terms and Supply Support

MOQ, packing and freight should reflect how the buyer will distribute the product. The normal minimum is 20 pieces and preparation is 7–15 days after confirmation; warranty coverage is 18 months under agreed terms, with labeling and documentation settled before shipment.

Demand from a regional machine dealer should keep 0-23000-1751 tied to Komatsu PC200-5. For engine-overhaul planning, the branch inventory manager can use a machine-down contingency stock, keep the flange measurement sheet and review old-unit photo linkage at goods-in. This supports clear lot-to-lot comparison while keeping repeat-order carton marks visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 0-23000-1751, Komatsu PC200-5 and the confirmed physical configuration on the quotation.

0-23000-1751 Komatsu PC200-5 Starter Motor FAQs

How can a branch inventory manager source 0-23000-1751 for engine-overhaul planning?

Branch inventory manager teams should tie 0-23000-1751 to Komatsu PC200-5, 24V, 5.5kW, 11T and the removed-unit photographs before requesting price. For engine-overhaul planning, state quantity, destination and delivery timing, then review old-unit photo linkage. Ask Elecdura to address repeat-order carton marks and clear lot-to-lot comparison in the same quotation.

Old-unit photo linkage check: How should 24V be confirmed for 0-23000-1751?

Check the machine electrical system, old-starter label and service record before ordering. Keep 5.5kW, 11T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Keep 0-23000-1751 traceable through engine-overhaul planning.

Old-unit photo linkage check: What information helps review the 0-23000-1751 warranty enquiry?

Provide the invoice or lot reference, installation date, Komatsu PC200-5 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Link 0-23000-1751 photographs to the old-unit photo linkage record.

Clear lot-to-lot comparison: What lead-time details should be stated for the 0-23000-1751 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Carry the 0-23000-1751 result into repeat-order carton marks.

Clear lot-to-lot comparison: What should be checked before installing the 0-23000-1751 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Retain 0-23000-1751 for clear lot-to-lot comparison and receiving review.

Old-unit photo linkage check: What should receiving staff inspect on the 0-23000-1751 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Komatsu PC200-5 inventory. Retain the 0-23000-1751 result for engine-overhaul planning.

For engine-overhaul planning handled by a branch inventory manager, when is a sample order useful for 0-23000-1751?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. File 0-23000-1751 with the old-unit photo linkage check.

Branch inventory manager receiving review: What should a buyer include in the 0-23000-1751 quotation request?

Send the complete 0-23000-1751 reference, Komatsu PC200-5 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 5.5kW 11T unit, packing, lead time and freight in one focused offer. Use 0-23000-1751 when arranging repeat-order carton marks.

Ask for 0-23000-1751 B2B Starter Motor Supply Terms

Email info@elecdurauto.com with 0-23000-1751, Komatsu PC200-5 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 5.5kW 11T offer, availability, packing, lead time and freight options.