ELECDURA NETWORK
Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
0-23000-6091
0-23000-6091
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
0-23000-6091
Isuzu 6RB2/6RQ1; 24V, 8.0kW, 11T, 46mm pinion reference
Confirm 11T pinion and 46mm reference, mounting face, drive reach, solenoid position and terminal orientation, 24V, 8.0kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
0-23000-6091 8.0kW for Isuzu 6RB2/6RQ1 is presented for wholesale enquiries with the listed 24V, 8.0kW and 11T specification. That precise identity gives commercial buyers a practical starting point for checking fit, availability, packing and delivery without relying on a broad starter-family description.
Rebuild workshop buyer teams handling tender quotation should send 0-23000-6091 8.0kW, the Isuzu 6RB2/6RQ1 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address shorter machine downtime, branch-ready labels and the correct physical configuration in one useful commercial offer.
| Primary order identity | 0-23000-6091 8.0kW |
| Target application | Isuzu 6RB2/6RQ1 |
| Starter design | Sawafuji-type replacement |
| System voltage | 24V |
| Rated output | 8.0kW |
| Pinion identification | 11T / 46mm reference |
| OE / reference group | 0-23000-6091 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
Do not approve 0-23000-6091 from the label alone. Match 11T pinion and 46mm reference, mounting face, drive reach, solenoid position and terminal orientation, followed by the locating surface and drive projection. If one point differs, keep the unit on hold until the engine or machine record explains the difference.
Electrical identity and mechanical fit must agree. Verify 24V, the 8.0kW rating and terminal layout, then count the 11 pinion teeth. A correct flange with the wrong system voltage, output or cable position is not an acceptable substitute.
A mixed-reference enquiry should show 0-23000-6091 8.0kW and every alternative on separate lines, each tied to its own photo or source. Elecdura can then compare the candidates with the Isuzu 6RB2/6RQ1 requirement without implying that all listed numbers are automatically interchangeable.
For tender quotation, keep 0-23000-6091 8.0kW, Isuzu 6RB2/6RQ1, 24V, 8.0kW and 11T on one purchasing record. At goods-in, review flange and locating-register fit before releasing the lot. This gives the rebuild workshop buyer a documented basis for shorter machine downtime when the next order is raised.
Elecdura supports qualified wholesale orders from 20 pieces, with normal preparation of 7–15 days after order confirmation and an 18-month warranty under agreed sales terms. Neutral packaging is available, and private-label requirements can be reviewed against order quantity, artwork and delivery schedule.
Demand from a diesel rebuild bench should keep 0-23000-6091 8.0kW tied to Isuzu 6RB2/6RQ1. For tender quotation, the rebuild workshop buyer can use a fast-moving counter stock, retain the accepted sample photographs and review flange and locating-register fit at goods-in. This supports shorter machine downtime while keeping branch-ready labels visible.
The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 0-23000-6091 8.0kW application and specification shown above for their own product comparison.
Rebuild workshop buyer teams should tie 0-23000-6091 8.0kW to Isuzu 6RB2/6RQ1, 24V, 8.0kW, 11T and the removed-unit photographs before requesting price. For tender quotation, state quantity, destination and delivery timing, then review flange and locating-register fit. Ask Elecdura to address branch-ready labels and shorter machine downtime in the same quotation.
Compare 11T pinion and 46mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Keep 0-23000-6091 8.0kW traceable through tender quotation.
A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Link 0-23000-6091 8.0kW photographs to the flange and locating-register fit record.
Check the machine electrical system, old-starter label and service record before ordering. Keep 8.0kW, 11T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. File 0-23000-6091 8.0kW with the flange and locating-register fit check.
Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Use 0-23000-6091 8.0kW when arranging branch-ready labels.
Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. File 0-23000-6091 8.0kW with the flange and locating-register fit check.
Provide the invoice or lot reference, installation date, Isuzu 6RB2/6RQ1 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Use 0-23000-6091 8.0kW when arranging branch-ready labels.
List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. This supports shorter machine downtime for 0-23000-6091 8.0kW.
Email info@elecdurauto.com with 0-23000-6091 8.0kW, Isuzu 6RB2/6RQ1 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 8.0kW 11T offer, availability, packing, lead time and freight options.
