Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
0-23000-7061
0-23000-7061
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
0-23000-7061
Isuzu 10PD1; 24V, 7.4kW, 12T, 45mm pinion reference
Confirm 12T pinion and 45mm reference, mounting face, drive reach, solenoid position and terminal orientation, 24V, 7.4kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
Elecdura supplies 0-23000-7061 for Isuzu 10PD1 to parts distributors, rebuilders and fleet-service buyers. This Nikko-type replacement is specified as 24V, 7.4kW and 12T; keeping those facts beside the application makes sample comparison and repeat purchasing more consistent.
Service network teams handling multi-branch transfer should send 0-23000-7061, the Isuzu 10PD1 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address clear lot-to-lot comparison, branch-ready labels and the correct physical configuration in one useful commercial offer.
| Primary order identity | 0-23000-7061 |
| Target application | Isuzu 10PD1 |
| Starter design | Nikko-type replacement |
| System voltage | 24V |
| Rated output | 7.4kW |
| Pinion identification | 12T / 45mm reference |
| OE / reference group | 0-23000-7061 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
Receiving and technical teams should concentrate on 12T pinion and 45mm reference, mounting face, drive reach, solenoid position and terminal orientation. A square drive-end image plus a side image gives a much clearer comparison of mounting, locating and pinion relationships than a general product shot, reducing the chance of releasing a visually similar but unsuitable unit.
Before ordering, the buyer should verify 24V, 7.4kW output, 12T pinion and terminal arrangement. Keeping these points together helps warehouse and sales teams avoid switching a similar-looking unit into the Isuzu 10PD1 order.
The reference line for this product is 0-23000-7061. Do not shorten punctuation or merge it with a neighboring family in the ERP; retain Isuzu 10PD1 and the core specification beside it so sales, purchasing and receiving teams are working from the same item identity.
For multi-branch transfer, keep 0-23000-7061, Isuzu 10PD1, 24V, 7.4kW and 12T on one purchasing record. At goods-in, review old-unit photo linkage before releasing the lot. This gives the service network a documented basis for clear lot-to-lot comparison when the next order is raised.
MOQ, packing and freight should reflect how the buyer will distribute the product. The normal minimum is 20 pieces and preparation is 7–15 days after confirmation; warranty coverage is 18 months under agreed terms, with labeling and documentation settled before shipment.
Demand from a fleet powertrain store should keep 0-23000-7061 tied to Isuzu 10PD1. For multi-branch transfer, the service network can use a machine-down contingency stock, retain the accepted sample photographs and review old-unit photo linkage at goods-in. This supports clear lot-to-lot comparison while keeping branch-ready labels visible.
This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the 0-23000-7061 order should still be based on the listed application, electrical data and physical unit checks.
Service network teams should tie 0-23000-7061 to Isuzu 10PD1, 24V, 7.4kW, 12T and the removed-unit photographs before requesting price. For multi-branch transfer, state quantity, destination and delivery timing, then review old-unit photo linkage. Ask Elecdura to address branch-ready labels and clear lot-to-lot comparison in the same quotation.
No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 45mm reference, solenoid position, terminals and 24V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Keep 0-23000-7061 traceable through multi-branch transfer.
Use the full reference, Isuzu 10PD1 application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Link 0-23000-7061 photographs to the old-unit photo linkage record.
Check the machine electrical system, old-starter label and service record before ordering. Keep 7.4kW, 12T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Retain the 0-23000-7061 result for multi-branch transfer.
Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. This supports clear lot-to-lot comparison for 0-23000-7061.
Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Isuzu 10PD1 inventory. Retain the 0-23000-7061 result for multi-branch transfer.
Compare 12T pinion and 45mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. File 0-23000-7061 with the old-unit photo linkage check.
Send the complete 0-23000-7061 reference, Isuzu 10PD1 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 7.4kW 12T unit, packing, lead time and freight in one focused offer. Carry the 0-23000-7061 result into branch-ready labels.
Email info@elecdurauto.com with 0-23000-7061, Isuzu 10PD1 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 7.4kW 12T offer, availability, packing, lead time and freight options.
