0001 218 014 Fiat Croma 12V 2.2kW Starter Motor Wholesale Supply

0001 218 014 Fiat Croma Starter Motor Distributor Sourcing

0001 218 014 Fiat Croma 12V 2.2kW Starter Motor Wholesale Supply defines a 12V, 2.2kW, 9T line for Fiat Croma enquiries. It supports Fiat Croma purchasing where the 12V, 2.2kW and 9T identity must remain visible from quotation through receiving. Keep the full reference and application together when requesting sample, quantity, packing and delivery terms.

Import distributor teams handling sample validation should send 0001 218 014, the Fiat Croma record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address cleaner branch replenishment, sample-to-bulk scheduling and the correct physical configuration in one useful commercial offer.

0001 218 014 Starter Motor Wholesale Fitment Checks

Do not approve 0001 218 014 from the label alone. Match 9T pinion, mounting face, drive reach, solenoid position and terminal orientation, followed by the locating surface and drive projection. If one point differs, keep the unit on hold until the engine or machine record explains the difference.

For technical sign-off, compare the stated 12V, 2.2kW and 9T data with the removed unit or service record. Then inspect solenoid clocking and terminal direction. These checks keep an electrical match from being undermined by a cable-access problem.

0001 218 014 Starter Motor Reference Management for B2B Purchasing

Use 0001 218 014 as the primary searchable order identity. If the label or service record shows an alternate reference, list its complete format and source on a separate RFQ line until voltage, output, drive and mounting have all been compared.

For sample validation, keep 0001 218 014, Fiat Croma, 12V, 2.2kW and 9T on one purchasing record. At goods-in, review drive-end geometry before releasing the lot. This gives the import distributor a documented basis for cleaner branch replenishment when the next order is raised.

0001 218 014 Starter Motor Wholesale Packaging and Replenishment

Elecdura supports qualified wholesale orders from 20 pieces, with normal preparation of 7–15 days after order confirmation and an 18-month warranty under agreed sales terms. Neutral packaging is available, and private-label requirements can be reviewed against order quantity, artwork and delivery schedule.

Demand from an engine-overhaul workshop should keep 0001 218 014 tied to Fiat Croma. For sample validation, the import distributor can use a central-to-branch transfer plan, record the removed-unit dimensions and review drive-end geometry at goods-in. This supports cleaner branch replenishment while keeping sample-to-bulk scheduling visible.

This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the 0001 218 014 order should still be based on the listed application, electrical data and physical unit checks.

0001 218 014 Fiat Croma Starter Motor FAQs

How can an import distributor source 0001 218 014 for sample validation?

Import distributor teams should tie 0001 218 014 to Fiat Croma, 12V, 2.2kW, 9T and the removed-unit photographs before requesting price. For sample validation, state quantity, destination and delivery timing, then review drive-end geometry. Ask Elecdura to address sample-to-bulk scheduling and cleaner branch replenishment in the same quotation.

Cleaner branch replenishment: Which physical details matter most when comparing 0001 218 014?

Compare 9T pinion, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Use 0001 218 014 when arranging sample-to-bulk scheduling.

Sample-to-bulk scheduling question: How can workshops photograph 0001 218 014 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Use 0001 218 014 when arranging sample-to-bulk scheduling.

To support cleaner branch replenishment, why should Fiat Croma stay on the 0001 218 014 order line?

The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Fiat Croma, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Retain the 0001 218 014 result for sample validation.

Drive-end geometry check: How can a distributor plan stock for 0001 218 014?

Use active Fiat Croma customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. This supports cleaner branch replenishment for 0001 218 014.

For sample-to-bulk scheduling, when is a sample order useful for 0001 218 014?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Link 0001 218 014 photographs to the drive-end geometry record.

For sample validation handled by an import distributor, how should branches keep 0001 218 014 separate from similar starters?

Use the full reference, Fiat Croma application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Keep 0001 218 014 traceable through sample validation.

Sample-to-bulk scheduling question: What lead-time details should be stated for the 0001 218 014 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. This supports cleaner branch replenishment for 0001 218 014.

Send 0001 218 014 Starter Motor RFQ Details to Elecdura

Email info@elecdurauto.com with 0001 218 014, Fiat Croma details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.2kW 9T offer, availability, packing, lead time and freight options.