0001 218 174 Iveco 12V 2.2kW Starter Motor Bulk Supply

0001 218 174 Iveco Starter Motor Distributor Sourcing

Elecdura supplies 0001 218 174 for Iveco to parts distributors, rebuilders and fleet-service buyers. This Bosch-type replacement is specified as 12V, 2.2kW and 9T; keeping those facts beside the application makes sample comparison and repeat purchasing more consistent.

Service network teams handling sample validation should send 0001 218 174, the Iveco record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address fewer fitment returns, planned warehouse release and the correct physical configuration in one useful commercial offer.

0001 218 174 Starter Motor Wholesale Fitment Checks

Ask the workshop to photograph 9T pinion and 35mm reference, mounting face, drive reach, solenoid position and terminal orientation without perspective distortion. The same photo set should show the mounting register and the pinion position relative to the flange; these points determine whether a starter that looks similar can actually seat and engage correctly.

Confirm the machine system as 12V and retain the 2.2kW, 9T specification on the RFQ. Check that the main cable and control lead can reach their studs without tight bends or interference, especially where the starter sits close to engine or frame components.

0001 218 174 Starter Motor Distributor Reorder Identification

On cartons, purchase orders and customer quotations, retain the complete 0001 218 174 string. If additional references are supplied, show each one in full rather than compressing them into a broad interchange statement; the application and physical unit still require a complete match.

For sample validation, keep 0001 218 174, Iveco, 12V, 2.2kW and 9T on one purchasing record. At goods-in, review terminal clocking and cable clearance before releasing the lot. This gives the service network a documented basis for fewer fitment returns when the next order is raised.

0001 218 174 Starter Motor Distributor Packing and Stock Planning

MOQ, packing and freight should reflect how the buyer will distribute the product. The normal minimum is 20 pieces and preparation is 7–15 days after confirmation; warranty coverage is 18 months under agreed terms, with labeling and documentation settled before shipment.

Demand from a bus service workshop should keep 0001 218 174 tied to Iveco. For sample validation, the service network can use a repeat-lot release rule, capture the terminal-side view and review terminal clocking and cable clearance at goods-in. This supports fewer fitment returns while keeping planned warehouse release visible.

The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 0001 218 174 application and specification shown above for their own product comparison.

0001 218 174 Iveco Starter Motor FAQs

How can a service network source 0001 218 174 for sample validation?

Service network teams should tie 0001 218 174 to Iveco, 12V, 2.2kW, 9T and the removed-unit photographs before requesting price. For sample validation, state quantity, destination and delivery timing, then review terminal clocking and cable clearance. Ask Elecdura to address planned warehouse release and fewer fitment returns in the same quotation.

Service network receiving review: Is a matching 9T pinion enough to approve 0001 218 174?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 35mm reference, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Keep 0001 218 174 traceable through sample validation.

Fewer fitment returns: Why should Iveco stay on the 0001 218 174 order line?

The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Iveco, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Link 0001 218 174 photographs to the terminal clocking and cable clearance record.

Service network receiving review: What should a buyer include in the 0001 218 174 quotation request?

Send the complete 0001 218 174 reference, Iveco details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 2.2kW 9T unit, packing, lead time and freight in one focused offer. Carry the 0001 218 174 result into planned warehouse release.

For planned warehouse release, how can a distributor plan stock for 0001 218 174?

Use active Iveco customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Retain 0001 218 174 for fewer fitment returns and receiving review.

Service network receiving review: What should receiving staff inspect on the 0001 218 174 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Iveco inventory. Retain the 0001 218 174 result for sample validation.

To support fewer fitment returns, how can workshops photograph 0001 218 174 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. File 0001 218 174 with the terminal clocking and cable clearance check.

For planned warehouse release, how should branches keep 0001 218 174 separate from similar starters?

Use the full reference, Iveco application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Use 0001 218 174 when arranging planned warehouse release.

Send 0001 218 174 Starter Motor RFQ Details to Elecdura

Email info@elecdurauto.com with 0001 218 174, Iveco details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.2kW 9T offer, availability, packing, lead time and freight options.