0001 231 008 MAN 24V 4.0kW Starter Motor Wholesale Supply

0001 231 008 MAN Starter Motor Wholesale Overview

The 0001 231 008 starter for MAN is intended for replacement demand. It combines 24V, 4.0kW output with the 10T drive, allowing B2B buyers to keep the quotation tied to one application and physical configuration rather than a broad visual description.

Equipment dealer teams handling tender quotation should send 0001 231 008, the MAN record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address consistent rebuild-bench identification, mixed-SKU export packing and the correct physical configuration in one useful commercial offer.

0001 231 008 Starter Motor Data for Distributor Review

The key fit controls are 10T pinion, mounting face, drive reach, solenoid position and terminal orientation. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.

Alongside the mounting comparison, verify 24V, 4.0kW, 10T and the position of each connection. The combination provides a much safer purchasing identity than a single cross-reference, particularly for distributors supporting several engine or machine families.

0001 231 008 Starter Motor Distributor Reorder Identification

0001 231 008 should remain the lead reference for this MAN line. Cross-references are useful for discovery, but the buyer should accept them only after the 24V, 4.0kW, 10T, mounting and terminal details agree with the removed starter.

For tender quotation, keep 0001 231 008, MAN, 24V, 4.0kW and 10T on one purchasing record. At goods-in, review branch stock-location control before releasing the lot. This gives the equipment dealer a documented basis for consistent rebuild-bench identification when the next order is raised.

0001 231 008 Starter Motor Wholesale Packaging and Replenishment

The quotation can address product price, carton format, labels, lead time and delivery method in one response. For qualified orders, Elecdura normally supplies from 20 pieces with 7–15 days preparation and an 18-month warranty, subject to the confirmed sales terms.

Demand from a regional transport workshop should keep 0001 231 008 tied to MAN. For tender quotation, the equipment dealer can use an engine-rebuild allocation, archive the carton and lot label and review branch stock-location control at goods-in. This supports consistent rebuild-bench identification while keeping mixed-SKU export packing visible.

The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 0001 231 008 application and specification shown above for their own product comparison.

0001 231 008 MAN Starter Motor FAQs

How can an equipment dealer source 0001 231 008 for tender quotation?

Equipment dealer teams should tie 0001 231 008 to MAN, 24V, 4.0kW, 10T and the removed-unit photographs before requesting price. For tender quotation, state quantity, destination and delivery timing, then review branch stock-location control. Ask Elecdura to address mixed-SKU export packing and consistent rebuild-bench identification in the same quotation.

Branch stock-location control check: Which physical details matter most when comparing 0001 231 008?

Compare 10T pinion, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. File 0001 231 008 with the branch stock-location control check.

To support consistent rebuild-bench identification, how should 24V be confirmed for 0001 231 008?

Check the machine electrical system, old-starter label and service record before ordering. Keep 4.0kW, 10T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Use 0001 231 008 when arranging mixed-SKU export packing.

Equipment dealer receiving review: Why should MAN stay on the 0001 231 008 order line?

The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping MAN, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. This supports consistent rebuild-bench identification for 0001 231 008.

During tender quotation, what information helps review the 0001 231 008 warranty enquiry?

Provide the invoice or lot reference, installation date, MAN details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Keep 0001 231 008 traceable through tender quotation.

During tender quotation, what should a buyer include in the 0001 231 008 quotation request?

Send the complete 0001 231 008 reference, MAN details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 4.0kW 10T unit, packing, lead time and freight in one focused offer. Link 0001 231 008 photographs to the branch stock-location control record.

During tender quotation, what can cause slow cranking besides a fault in 0001 231 008?

Low battery capacity, excessive voltage drop, corroded lugs, weak grounds, undersized cables and mechanical engine drag can all reduce cranking speed. Record loaded battery voltage and cable-drop readings before replacement. This protects the buyer from changing a starter while the original circuit problem remains. Carry the 0001 231 008 result into mixed-SKU export packing.

For tender quotation handled by an equipment dealer, is a matching 10T pinion enough to approve 0001 231 008?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, solenoid position, terminals and 24V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Retain 0001 231 008 for consistent rebuild-bench identification and receiving review.

Ask for 0001 231 008 B2B Starter Motor Supply Terms

Email info@elecdurauto.com with 0001 231 008, MAN details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 4.0kW 10T offer, availability, packing, lead time and freight options.