Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
0001 368 017
0001 368 017
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
0001 368 017
Volvo F7; 24V, 4.0kW, 9T, 35mm pinion reference
Confirm 9T pinion and 35mm reference, mounting face, drive reach, solenoid position and terminal orientation, 24V, 4.0kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
0001 368 017 supports commercial sourcing for Volvo F7 with the Bosch-type replacement design. Buyers receive a clear 24V, 4.0kW and 9T specification that can be checked against the removed unit before quantity, packing and freight are finalized.
Machine-repair contractor teams handling engine-overhaul planning should send 0001 368 017, the Volvo F7 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address faster quotation review, destination-specific packing and the correct physical configuration in one useful commercial offer.
| Primary order identity | 0001 368 017 |
| Target application | Volvo F7 |
| Starter design | Bosch-type replacement |
| System voltage | 24V |
| Rated output | 4.0kW |
| Pinion identification | 9T / 35mm reference |
| OE / reference group | 0001 368 017 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
Do not approve 0001 368 017 from the label alone. Match 9T pinion and 35mm reference, mounting face, drive reach, solenoid position and terminal orientation, followed by the locating surface and drive projection. If one point differs, keep the unit on hold until the engine or machine record explains the difference.
A correct replacement must satisfy both the 24V 4.0kW electrical requirement and the 9T drive specification. Inspect the control-terminal connection and battery-cable route as part of the fit check rather than treating them as an after-installation detail.
When a buyer provides 0001 368 017, record whether the reference came from a label, invoice or service record, and keep the complete 0001 368 017 format on the quotation. The final choice must also agree with the actual application and physical unit.
For engine-overhaul planning, keep 0001 368 017, Volvo F7, 24V, 4.0kW and 9T on one purchasing record. At goods-in, review carton and item segregation before releasing the lot. This gives the machine-repair contractor a documented basis for faster quotation review when the next order is raised.
The quotation can address product price, carton format, labels, lead time and delivery method in one response. For qualified orders, Elecdura normally supplies from 20 pieces with 7–15 days preparation and an 18-month warranty, subject to the confirmed sales terms.
Demand from an export engine-parts stockroom should keep 0001 368 017 tied to Volvo F7. For engine-overhaul planning, the machine-repair contractor can use a sample-controlled new line, link the machine plate to the item and review carton and item segregation at goods-in. This supports faster quotation review while keeping destination-specific packing visible.
The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 0001 368 017 application and specification shown above for their own product comparison.
Machine-repair contractor teams should tie 0001 368 017 to Volvo F7, 24V, 4.0kW, 9T and the removed-unit photographs before requesting price. For engine-overhaul planning, state quantity, destination and delivery timing, then review carton and item segregation. Ask Elecdura to address destination-specific packing and faster quotation review in the same quotation.
List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. This supports faster quotation review for 0001 368 017.
Use active Volvo F7 customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Keep 0001 368 017 traceable through engine-overhaul planning.
Compare 9T pinion and 35mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Link 0001 368 017 photographs to the carton and item segregation record.
Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Volvo F7 inventory. Carry the 0001 368 017 result into destination-specific packing.
Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Retain 0001 368 017 for faster quotation review and receiving review.
Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Retain the 0001 368 017 result for engine-overhaul planning.
Use the full reference, Volvo F7 application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. File 0001 368 017 with the carton and item segregation check.
Email info@elecdurauto.com with 0001 368 017, Volvo F7 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 4.0kW 9T offer, availability, packing, lead time and freight options.
