0001 416 028 Volvo Penta 24V 5.4kW Starter Motor B2B Supply

0001 416 028 Volvo Penta Starter Motor B2B Purchasing Overview

0001 416 028 supports commercial sourcing for Volvo Penta with the Bosch-type replacement design. Buyers receive a clear 24V, 5.4kW and 9T specification that can be checked against the removed unit before quantity, packing and freight are finalized.

Import distributor teams handling multi-branch transfer should send 0001 416 028, the Volvo Penta record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address faster quotation review, project delivery timing and the correct physical configuration in one useful commercial offer.

0001 416 028 Starter Motor Specifications for B2B Orders

For sample confirmation, review 9T pinion and 35mm reference, mounting face, drive reach, solenoid position and terminal orientation together with the overall drive-end reach. Measure or photograph the old unit on a flat surface where practical. Small differences at the flange or pinion can matter even when the motor and solenoid housings have similar proportions.

For technical sign-off, compare the stated 24V, 5.4kW and 9T data with the removed unit or service record. Then inspect solenoid clocking and terminal direction. These checks keep an electrical match from being undermined by a cable-access problem.

0001 416 028 Starter Motor Distributor Reorder Identification

Use 0001 416 028 as the primary searchable order identity. If the label or service record shows an alternate reference, list its complete format and source on a separate RFQ line until voltage, output, drive and mounting have all been compared.

For multi-branch transfer, keep 0001 416 028, Volvo Penta, 24V, 5.4kW and 9T on one purchasing record. At goods-in, review carton and item segregation before releasing the lot. This gives the import distributor a documented basis for faster quotation review when the next order is raised.

0001 416 028 Starter Motor Export Supply and Inventory Planning

The quotation can address product price, carton format, labels, lead time and delivery method in one response. For qualified orders, Elecdura normally supplies from 20 pieces with 7–15 days preparation and an 18-month warranty, subject to the confirmed sales terms.

Demand from an export engine-parts stockroom should keep 0001 416 028 tied to Volvo Penta. For multi-branch transfer, the import distributor can use a sample-controlled new line, mark the confirmed voltage and output and review carton and item segregation at goods-in. This supports faster quotation review while keeping project delivery timing visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 0001 416 028, Volvo Penta and the confirmed physical configuration on the quotation.

0001 416 028 Volvo Penta Starter Motor FAQs

How can an import distributor source 0001 416 028 for multi-branch transfer?

Import distributor teams should tie 0001 416 028 to Volvo Penta, 24V, 5.4kW, 9T and the removed-unit photographs before requesting price. For multi-branch transfer, state quantity, destination and delivery timing, then review carton and item segregation. Ask Elecdura to address project delivery timing and faster quotation review in the same quotation.

During multi-branch transfer, what should a buyer include in the 0001 416 028 quotation request?

Send the complete 0001 416 028 reference, Volvo Penta details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 5.4kW 9T unit, packing, lead time and freight in one focused offer. Link 0001 416 028 photographs to the carton and item segregation record.

Faster quotation review: Is a matching 9T pinion enough to approve 0001 416 028?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 35mm reference, solenoid position, terminals and 24V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Carry the 0001 416 028 result into project delivery timing.

For multi-branch transfer handled by an import distributor, how should 24V be confirmed for 0001 416 028?

Check the machine electrical system, old-starter label and service record before ordering. Keep 5.4kW, 9T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Retain 0001 416 028 for faster quotation review and receiving review.

To support faster quotation review, how should alternate references for 0001 416 028 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Retain the 0001 416 028 result for multi-branch transfer.

Import distributor receiving review: How should branches keep 0001 416 028 separate from similar starters?

Use the full reference, Volvo Penta application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. File 0001 416 028 with the carton and item segregation check.

Project delivery timing question: What information helps review the 0001 416 028 warranty enquiry?

Provide the invoice or lot reference, installation date, Volvo Penta details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Use 0001 416 028 when arranging project delivery timing.

To support faster quotation review, which physical details matter most when comparing 0001 416 028?

Compare 9T pinion and 35mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. This supports faster quotation review for 0001 416 028.

Send 0001 416 028 Starter Motor RFQ Details to Elecdura

Email info@elecdurauto.com with 0001 416 028, Volvo Penta details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 5.4kW 9T offer, availability, packing, lead time and freight options.