0001 417 043 Scania 113 24V 6.0kW Starter Motor Bulk Supply

0001 417 043 Scania 113 Starter Motor B2B Purchasing Overview

The 0001 417 043 starter for Scania 113 is intended for replacement demand. It combines 24V, 6.0kW output with the 11T drive, allowing B2B buyers to keep the quotation tied to one application and physical configuration rather than a broad visual description.

Export wholesaler teams handling urgent replacement should send 0001 417 043, the Scania 113 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address shorter machine downtime, sample-to-bulk scheduling and the correct physical configuration in one useful commercial offer.

0001 417 043 Starter Motor B2B Specification

The key fit controls are 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.

For technical sign-off, compare the stated 24V, 6.0kW and 11T data with the removed unit or service record. Then inspect solenoid clocking and terminal direction. These checks keep an electrical match from being undermined by a cable-access problem.

0001 417 043 Starter Motor Reference Management for B2B Purchasing

0001 417 043 should remain the lead reference for this Scania 113 line. Cross-references are useful for discovery, but the buyer should accept them only after the 24V, 6.0kW, 11T, mounting and terminal details agree with the removed starter.

For urgent replacement, keep 0001 417 043, Scania 113, 24V, 6.0kW and 11T on one purchasing record. At goods-in, review flange and locating-register fit before releasing the lot. This gives the export wholesaler a documented basis for shorter machine downtime when the next order is raised.

0001 417 043 Starter Motor Export Supply and Inventory Planning

Elecdura works with importers, parts distributors, rebuilders and fleet-service businesses. A typical order starts at 20 pieces and takes 7–15 days after confirmation, with neutral packaging, private-label review and an 18-month warranty available under the final commercial agreement.

Demand from a diesel rebuild bench should keep 0001 417 043 tied to Scania 113. For urgent replacement, the export wholesaler can use a fast-moving counter stock, record the removed-unit dimensions and review flange and locating-register fit at goods-in. This supports shorter machine downtime while keeping sample-to-bulk scheduling visible.

This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the 0001 417 043 order should still be based on the listed application, electrical data and physical unit checks.

0001 417 043 Scania 113 Starter Motor FAQs

How can an export wholesaler source 0001 417 043 for urgent replacement?

Export wholesaler teams should tie 0001 417 043 to Scania 113, 24V, 6.0kW, 11T and the removed-unit photographs before requesting price. For urgent replacement, state quantity, destination and delivery timing, then review flange and locating-register fit. Ask Elecdura to address sample-to-bulk scheduling and shorter machine downtime in the same quotation.

For sample-to-bulk scheduling, what should a buyer include in the 0001 417 043 quotation request?

Send the complete 0001 417 043 reference, Scania 113 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 6.0kW 11T unit, packing, lead time and freight in one focused offer. This supports shorter machine downtime for 0001 417 043.

During urgent replacement, what should be checked before installing the 0001 417 043 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Keep 0001 417 043 traceable through urgent replacement.

For urgent replacement handled by an export wholesaler, how can a distributor plan stock for 0001 417 043?

Use active Scania 113 customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Link 0001 417 043 photographs to the flange and locating-register fit record.

Shorter machine downtime: What lead-time details should be stated for the 0001 417 043 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Carry the 0001 417 043 result into sample-to-bulk scheduling.

For urgent replacement handled by an export wholesaler, what should receiving staff inspect on the 0001 417 043 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Scania 113 inventory. Retain 0001 417 043 for shorter machine downtime and receiving review.

During urgent replacement, which physical details matter most when comparing 0001 417 043?

Compare 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Retain the 0001 417 043 result for urgent replacement.

For sample-to-bulk scheduling, how should 24V be confirmed for 0001 417 043?

Check the machine electrical system, old-starter label and service record before ordering. Keep 6.0kW, 11T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. File 0001 417 043 with the flange and locating-register fit check.

Request 0001 417 043 Starter Motor Wholesale Pricing

Email info@elecdurauto.com with 0001 417 043, Scania 113 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 6.0kW 11T offer, availability, packing, lead time and freight options.