0001 417 045 Scania 143 24V 6.0kW Starter Motor Wholesale Supply

0001 417 045 Scania 143 Starter Motor B2B Supply

0001 417 045 for Scania 143 is presented for wholesale enquiries with the listed 24V, 6.0kW and 11T specification. That precise identity gives commercial buyers a practical starting point for checking fit, availability, packing and delivery without relying on a broad starter-family description.

Branch inventory manager teams handling urgent replacement should send 0001 417 045, the Scania 143 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address faster quotation review, consolidated freight planning and the correct physical configuration in one useful commercial offer.

0001 417 045 Starter Motor B2B Specification

The key fit controls are 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.

For technical sign-off, compare the stated 24V, 6.0kW and 11T data with the removed unit or service record. Then inspect solenoid clocking and terminal direction. These checks keep an electrical match from being undermined by a cable-access problem.

0001 417 045 Starter Motor Cross-References for Wholesale Supply

0001 417 045 should remain the lead reference for this Scania 143 line. Cross-references are useful for discovery, but the buyer should accept them only after the 24V, 6.0kW, 11T, mounting and terminal details agree with the removed starter.

For urgent replacement, keep 0001 417 045, Scania 143, 24V, 6.0kW and 11T on one purchasing record. At goods-in, review carton and item segregation before releasing the lot. This gives the branch inventory manager a documented basis for faster quotation review when the next order is raised.

0001 417 045 Starter Motor B2B Supply for Scania 143

For qualified B2B orders, the normal MOQ is 20 pieces and preparation is usually 7–15 days after the order is confirmed. Elecdura can discuss neutral cartons, private-label review, export documents and an 18-month warranty according to the agreed quotation.

Demand from an export engine-parts stockroom should keep 0001 417 045 tied to Scania 143. For urgent replacement, the branch inventory manager can use a sample-controlled new line, separate neighboring cross-references and review carton and item segregation at goods-in. This supports faster quotation review while keeping consolidated freight planning visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 0001 417 045, Scania 143 and the confirmed physical configuration on the quotation.

0001 417 045 Scania 143 Starter Motor FAQs

How can a branch inventory manager source 0001 417 045 for urgent replacement?

Branch inventory manager teams should tie 0001 417 045 to Scania 143, 24V, 6.0kW, 11T and the removed-unit photographs before requesting price. For urgent replacement, state quantity, destination and delivery timing, then review carton and item segregation. Ask Elecdura to address consolidated freight planning and faster quotation review in the same quotation.

Branch inventory manager receiving review: What information helps review the 0001 417 045 warranty enquiry?

Provide the invoice or lot reference, installation date, Scania 143 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Link 0001 417 045 photographs to the carton and item segregation record.

To support faster quotation review, what lead-time details should be stated for the 0001 417 045 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Carry the 0001 417 045 result into consolidated freight planning.

Faster quotation review: Which physical details matter most when comparing 0001 417 045?

Compare 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Retain 0001 417 045 for faster quotation review and receiving review.

For consolidated freight planning, can 0001 417 045 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Retain the 0001 417 045 result for urgent replacement.

To support faster quotation review, why should Scania 143 stay on the 0001 417 045 order line?

The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Scania 143, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. File 0001 417 045 with the carton and item segregation check.

For consolidated freight planning, how should branches keep 0001 417 045 separate from similar starters?

Use the full reference, Scania 143 application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Use 0001 417 045 when arranging consolidated freight planning.

During urgent replacement, is a matching 11T pinion enough to approve 0001 417 045?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 40mm reference, solenoid position, terminals and 24V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. This supports faster quotation review for 0001 417 045.

Ask for 0001 417 045 B2B Starter Motor Supply Terms

Email info@elecdurauto.com with 0001 417 045, Scania 143 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 6.0kW 11T offer, availability, packing, lead time and freight options.