Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
0306 402 0610
0306 402 0610
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
0306 402 0610
Yanmar 3T; 24V, 4.5kW, 13T, 46mm pinion reference
Confirm 13T pinion and 46mm reference, mounting face, drive reach, solenoid position and terminal orientation, 24V, 4.5kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
0306 402 0610 Yanmar 3T 24V 4.5kW Starter Motor Bulk Supply defines a 24V, 4.5kW, 13T line for Yanmar 3T enquiries. It serves Yanmar 3T replacement demand while keeping the 4.5kW output and 13T drive separate from nearby starter families. Keep the full reference and application together when requesting sample, quantity, packing and delivery terms.
Regional parts dealer teams handling repeat-lot review should send 0306 402 0610, the Yanmar 3T record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address shorter machine downtime, repeat-order carton marks and the correct physical configuration in one useful commercial offer.
| Primary order identity | 0306 402 0610 |
| Target application | Yanmar 3T |
| Starter design | 46121-037020 CCW replacement |
| System voltage | 24V |
| Rated output | 4.5kW |
| Pinion identification | 13T / 46mm reference |
| OE / reference group | 0306 402 0610 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
The key fit controls are 13T pinion and 46mm reference, mounting face, drive reach, solenoid position and terminal orientation. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.
The purchase record should state 24V, 4.5kW and 13T. Also compare solenoid position, battery-stud access and the control terminal with the removed unit. Cable reach or nearby components can make a different terminal orientation unsuitable even when the flange appears correct.
A mixed-reference enquiry should show 0306 402 0610 and every alternative on separate lines, each tied to its own photo or source. Elecdura can then compare the candidates with the Yanmar 3T requirement without implying that all listed numbers are automatically interchangeable.
For repeat-lot review, keep 0306 402 0610, Yanmar 3T, 24V, 4.5kW and 13T on one purchasing record. At goods-in, review flange and locating-register fit before releasing the lot. This gives the regional parts dealer a documented basis for shorter machine downtime when the next order is raised.
Elecdura works with importers, parts distributors, rebuilders and fleet-service businesses. A typical order starts at 20 pieces and takes 7–15 days after confirmation, with neutral packaging, private-label review and an 18-month warranty available under the final commercial agreement.
Demand from a diesel rebuild bench should keep 0306 402 0610 tied to Yanmar 3T. For repeat-lot review, the regional parts dealer can use a fast-moving counter stock, keep the flange measurement sheet and review flange and locating-register fit at goods-in. This supports shorter machine downtime while keeping repeat-order carton marks visible.
The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 0306 402 0610 application and specification shown above for their own product comparison.
Regional parts dealer teams should tie 0306 402 0610 to Yanmar 3T, 24V, 4.5kW, 13T and the removed-unit photographs before requesting price. For repeat-lot review, state quantity, destination and delivery timing, then review flange and locating-register fit. Ask Elecdura to address repeat-order carton marks and shorter machine downtime in the same quotation.
Send the complete 0306 402 0610 reference, Yanmar 3T details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 4.5kW 13T unit, packing, lead time and freight in one focused offer. File 0306 402 0610 with the flange and locating-register fit check.
Check the machine electrical system, old-starter label and service record before ordering. Keep 4.5kW, 13T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Use 0306 402 0610 when arranging repeat-order carton marks.
Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. This supports shorter machine downtime for 0306 402 0610.
Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Yanmar 3T inventory. Keep 0306 402 0610 traceable through repeat-lot review.
No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 46mm reference, solenoid position, terminals and 24V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Link 0306 402 0610 photographs to the flange and locating-register fit record.
Use the full reference, Yanmar 3T application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Carry the 0306 402 0610 result into repeat-order carton marks.
A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Retain 0306 402 0610 for shorter machine downtime and receiving review.
Email info@elecdurauto.com with 0306 402 0610, Yanmar 3T details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 4.5kW 13T offer, availability, packing, lead time and freight options.
