Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
0350 602 0091
0350 602 0091
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
0350 602 0091
Nissan RD8/RD10; 24V, 6.0kW, 11T, 47mm pinion reference
Confirm 11T pinion and 47mm reference, mounting face, drive reach, solenoid position and terminal orientation, 24V, 6.0kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
0350 602 0091 for Nissan RD8/RD10 is presented for wholesale enquiries with the listed 24V, 6.0kW and 11T specification. That precise identity gives commercial buyers a practical starting point for checking fit, availability, packing and delivery without relying on a broad starter-family description.
Rebuild workshop buyer teams handling repeat-lot review should send 0350 602 0091, the Nissan RD8/RD10 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address faster quotation review, planned warehouse release and the correct physical configuration in one useful commercial offer.
| Primary order identity | 0350 602 0091 |
| Target application | Nissan RD8/RD10 |
| Starter design | Sawafuji-type replacement |
| System voltage | 24V |
| Rated output | 6.0kW |
| Pinion identification | 11T / 47mm reference |
| OE / reference group | 0350 602 0091 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
The key fit controls are 11T pinion and 47mm reference, mounting face, drive reach, solenoid position and terminal orientation. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.
Alongside the mounting comparison, verify 24V, 6.0kW, 11T and the position of each connection. The combination provides a much safer purchasing identity than a single cross-reference, particularly for distributors supporting several engine or machine families.
Keep the reference group 0350 602 0091 attached to the Nissan RD8/RD10 details and confirmed photographs. This gives branch staff a practical reorder record and prevents a number from being separated from the exact configuration previously received.
For repeat-lot review, keep 0350 602 0091, Nissan RD8/RD10, 24V, 6.0kW and 11T on one purchasing record. At goods-in, review carton and item segregation before releasing the lot. This gives the rebuild workshop buyer a documented basis for faster quotation review when the next order is raised.
For qualified B2B orders, the normal MOQ is 20 pieces and preparation is usually 7–15 days after the order is confirmed. Elecdura can discuss neutral cartons, private-label review, export documents and an 18-month warranty according to the agreed quotation.
Demand from an export engine-parts stockroom should keep 0350 602 0091 tied to Nissan RD8/RD10. For repeat-lot review, the rebuild workshop buyer can use a sample-controlled new line, capture the terminal-side view and review carton and item segregation at goods-in. This supports faster quotation review while keeping planned warehouse release visible.
This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the 0350 602 0091 order should still be based on the listed application, electrical data and physical unit checks.
Rebuild workshop buyer teams should tie 0350 602 0091 to Nissan RD8/RD10, 24V, 6.0kW, 11T and the removed-unit photographs before requesting price. For repeat-lot review, state quantity, destination and delivery timing, then review carton and item segregation. Ask Elecdura to address planned warehouse release and faster quotation review in the same quotation.
Send the complete 0350 602 0091 reference, Nissan RD8/RD10 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 6.0kW 11T unit, packing, lead time and freight in one focused offer. File 0350 602 0091 with the carton and item segregation check.
Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Nissan RD8/RD10 inventory. Use 0350 602 0091 when arranging planned warehouse release.
Use the full reference, Nissan RD8/RD10 application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. This supports faster quotation review for 0350 602 0091.
A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Keep 0350 602 0091 traceable through repeat-lot review.
List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Link 0350 602 0091 photographs to the carton and item segregation record.
Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Carry the 0350 602 0091 result into planned warehouse release.
Check the machine electrical system, old-starter label and service record before ordering. Keep 6.0kW, 11T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Retain 0350 602 0091 for faster quotation review and receiving review.
Email info@elecdurauto.com with 0350 602 0091, Nissan RD8/RD10 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 6.0kW 11T offer, availability, packing, lead time and freight options.
