Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
0350 602 0330
0350 602 0330
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
0350 602 0330
Nissan PE6/PF6; 24V, 6.0kW, 11T, 40mm pinion reference
Confirm 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation, 24V, 6.0kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
0350 602 0330 for Nissan PE6/PF6 is presented for wholesale enquiries with the listed 24V, 6.0kW and 11T specification. That precise identity gives commercial buyers a practical starting point for checking fit, availability, packing and delivery without relying on a broad starter-family description.
Equipment dealer teams handling repeat-lot review should send 0350 602 0330, the Nissan PE6/PF6 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address fewer fitment returns, destination-specific packing and the correct physical configuration in one useful commercial offer.
| Primary order identity | 0350 602 0330 |
| Target application | Nissan PE6/PF6 |
| Starter design | Sawafuji-type replacement |
| System voltage | 24V |
| Rated output | 6.0kW |
| Pinion identification | 11T / 40mm reference |
| OE / reference group | 0350 602 0330 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
The key fit controls are 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.
A correct replacement must satisfy both the 24V 6.0kW electrical requirement and the 11T drive specification. Inspect the control-terminal connection and battery-cable route as part of the fit check rather than treating them as an after-installation detail.
When a buyer provides 0350 602 0330, record whether the reference came from a label, invoice or service record, and keep the complete 0350 602 0330 format on the quotation. The final choice must also agree with the actual application and physical unit.
For repeat-lot review, keep 0350 602 0330, Nissan PE6/PF6, 24V, 6.0kW and 11T on one purchasing record. At goods-in, review terminal clocking and cable clearance before releasing the lot. This gives the equipment dealer a documented basis for fewer fitment returns when the next order is raised.
For qualified B2B orders, the normal MOQ is 20 pieces and preparation is usually 7–15 days after the order is confirmed. Elecdura can discuss neutral cartons, private-label review, export documents and an 18-month warranty according to the agreed quotation.
Demand from an industrial-engine distributor should keep 0350 602 0330 tied to Nissan PE6/PF6. For repeat-lot review, the equipment dealer can use a repeat-lot release rule, link the machine plate to the item and review terminal clocking and cable clearance at goods-in. This supports fewer fitment returns while keeping destination-specific packing visible.
The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 0350 602 0330 application and specification shown above for their own product comparison.
Equipment dealer teams should tie 0350 602 0330 to Nissan PE6/PF6, 24V, 6.0kW, 11T and the removed-unit photographs before requesting price. For repeat-lot review, state quantity, destination and delivery timing, then review terminal clocking and cable clearance. Ask Elecdura to address destination-specific packing and fewer fitment returns in the same quotation.
Use active Nissan PE6/PF6 customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Link 0350 602 0330 photographs to the terminal clocking and cable clearance record.
Check the machine electrical system, old-starter label and service record before ordering. Keep 6.0kW, 11T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Carry the 0350 602 0330 result into destination-specific packing.
Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Nissan PE6/PF6 inventory. Retain 0350 602 0330 for fewer fitment returns and receiving review.
Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Retain the 0350 602 0330 result for repeat-lot review.
A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. File 0350 602 0330 with the terminal clocking and cable clearance check.
Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Use 0350 602 0330 when arranging destination-specific packing.
Compare 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. This supports fewer fitment returns for 0350 602 0330.
Email info@elecdurauto.com with 0350 602 0330, Nissan PE6/PF6 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 6.0kW 11T offer, availability, packing, lead time and freight options.
