Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
0350 702 0221
0350 702 0221
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
0350 702 0221
Hino EK; 24V, 6.0kW, 11T, 47.5mm pinion reference
Confirm 11T pinion and 47.5mm reference, mounting face, drive reach, solenoid position and terminal orientation, 24V, 6.0kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
0350 702 0221 for Hino EK is presented for wholesale enquiries with the listed 24V, 6.0kW and 11T specification. That precise identity gives commercial buyers a practical starting point for checking fit, availability, packing and delivery without relying on a broad starter-family description.
Service network teams handling scheduled stock refill should send 0350 702 0221, the Hino EK record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address faster quotation review, planned warehouse release and the correct physical configuration in one useful commercial offer.
| Primary order identity | 0350 702 0221 |
| Target application | Hino EK |
| Starter design | Sawafuji-type replacement |
| System voltage | 24V |
| Rated output | 6.0kW |
| Pinion identification | 11T / 47.5mm reference |
| OE / reference group | 0350 702 0221 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
Compare 11T pinion and 47.5mm reference, mounting face, drive reach, solenoid position and terminal orientation first, then inspect the housing clearance around the drive end. The purpose is to confirm how the unit mounts and engages, not merely whether it resembles another starter in the warehouse.
Electrical identity and mechanical fit must agree. Verify 24V, the 6.0kW rating and terminal layout, then count the 11 pinion teeth. A correct flange with the wrong system voltage, output or cable position is not an acceptable substitute.
When a buyer provides 0350 702 0221, record whether the reference came from a label, invoice or service record, and keep the complete 0350 702 0221 format on the quotation. The final choice must also agree with the actual application and physical unit.
For scheduled stock refill, keep 0350 702 0221, Hino EK, 24V, 6.0kW and 11T on one purchasing record. At goods-in, review carton and item segregation before releasing the lot. This gives the service network a documented basis for faster quotation review when the next order is raised.
Elecdura supports qualified wholesale orders from 20 pieces, with normal preparation of 7–15 days after order confirmation and an 18-month warranty under agreed sales terms. Neutral packaging is available, and private-label requirements can be reviewed against order quantity, artwork and delivery schedule.
Demand from a vehicle-parts importer should keep 0350 702 0221 tied to Hino EK. For scheduled stock refill, the service network can use a sample-controlled new line, capture the terminal-side view and review carton and item segregation at goods-in. This supports faster quotation review while keeping planned warehouse release visible.
This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the 0350 702 0221 order should still be based on the listed application, electrical data and physical unit checks.
Service network teams should tie 0350 702 0221 to Hino EK, 24V, 6.0kW, 11T and the removed-unit photographs before requesting price. For scheduled stock refill, state quantity, destination and delivery timing, then review carton and item segregation. Ask Elecdura to address planned warehouse release and faster quotation review in the same quotation.
Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. This supports faster quotation review for 0350 702 0221.
The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Hino EK, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Retain 0350 702 0221 for faster quotation review and receiving review.
Provide the invoice or lot reference, installation date, Hino EK details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. This supports faster quotation review for 0350 702 0221.
Use active Hino EK customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Retain the 0350 702 0221 result for scheduled stock refill.
A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Use 0350 702 0221 when arranging planned warehouse release.
Check the machine electrical system, old-starter label and service record before ordering. Keep 6.0kW, 11T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Carry the 0350 702 0221 result into planned warehouse release.
Use the full reference, Hino EK application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Retain 0350 702 0221 for faster quotation review and receiving review.
Email info@elecdurauto.com with 0350 702 0221, Hino EK details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 6.0kW 11T offer, availability, packing, lead time and freight options.
