0350 802 0110 Nissan RF10/RE10 24V 8.0kW Starter Motor Distributor Supply

0350 802 0110 Nissan RF10/RE10 Starter Motor B2B Purchasing Overview

The 0350 802 0110 starter for Nissan RF10/RE10 is intended for replacement demand. It combines 24V, 8.0kW output with the 11T drive, allowing B2B buyers to keep the quotation tied to one application and physical configuration rather than a broad visual description.

Machine-repair contractor teams handling tender quotation should send 0350 802 0110, the Nissan RF10/RE10 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address traceable repeat purchasing, destination-specific packing and the correct physical configuration in one useful commercial offer.

0350 802 0110 Starter Motor Specifications for B2B Orders

For sample confirmation, review 11T pinion and 47mm reference, mounting face, drive reach, solenoid position and terminal orientation together with the overall drive-end reach. Measure or photograph the old unit on a flat surface where practical. Small differences at the flange or pinion can matter even when the motor and solenoid housings have similar proportions.

For technical sign-off, compare the stated 24V, 8.0kW and 11T data with the removed unit or service record. Then inspect solenoid clocking and terminal direction. These checks keep an electrical match from being undermined by a cable-access problem.

0350 802 0110 Nissan RF10/RE10 Starter Motor Reference Control for Distributors

Use 0350 802 0110 as the primary searchable order identity. If the label or service record shows an alternate reference, list its complete format and source on a separate RFQ line until voltage, output, drive and mounting have all been compared.

For tender quotation, keep 0350 802 0110, Nissan RF10/RE10, 24V, 8.0kW and 11T on one purchasing record. At goods-in, review pinion reach and engagement before releasing the lot. This gives the machine-repair contractor a documented basis for traceable repeat purchasing when the next order is raised.

0350 802 0110 Starter Motor Wholesale Terms and Supply Support

The quotation can address product price, carton format, labels, lead time and delivery method in one response. For qualified orders, Elecdura normally supplies from 20 pieces with 7–15 days preparation and an 18-month warranty, subject to the confirmed sales terms.

Demand from a regional engine-parts branch should keep 0350 802 0110 tied to Nissan RF10/RE10. For tender quotation, the machine-repair contractor can use a consolidated export lot, link the machine plate to the item and review pinion reach and engagement at goods-in. This supports traceable repeat purchasing while keeping destination-specific packing visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 0350 802 0110, Nissan RF10/RE10 and the confirmed physical configuration on the quotation.

0350 802 0110 Nissan RF10/RE10 Starter Motor FAQs

How can a machine-repair contractor source 0350 802 0110 for tender quotation?

Machine-repair contractor teams should tie 0350 802 0110 to Nissan RF10/RE10, 24V, 8.0kW, 11T and the removed-unit photographs before requesting price. For tender quotation, state quantity, destination and delivery timing, then review pinion reach and engagement. Ask Elecdura to address destination-specific packing and traceable repeat purchasing in the same quotation.

Machine-repair contractor receiving review: What should be checked before installing the 0350 802 0110 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Link 0350 802 0110 photographs to the pinion reach and engagement record.

For destination-specific packing, how should branches keep 0350 802 0110 separate from similar starters?

Use the full reference, Nissan RF10/RE10 application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Carry the 0350 802 0110 result into destination-specific packing.

Machine-repair contractor receiving review: Why should Nissan RF10/RE10 stay on the 0350 802 0110 order line?

The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Nissan RF10/RE10, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Retain 0350 802 0110 for traceable repeat purchasing and receiving review.

Pinion reach and engagement check: What should receiving staff inspect on the 0350 802 0110 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Nissan RF10/RE10 inventory. Retain the 0350 802 0110 result for tender quotation.

Destination-specific packing question: What lead-time details should be stated for the 0350 802 0110 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. File 0350 802 0110 with the pinion reach and engagement check.

Pinion reach and engagement check: How should alternate references for 0350 802 0110 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Use 0350 802 0110 when arranging destination-specific packing.

Machine-repair contractor receiving review: Can 0350 802 0110 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. This supports traceable repeat purchasing for 0350 802 0110.

Get 0350 802 0110 Nissan RF10/RE10 Starter Motor Pricing

Email info@elecdurauto.com with 0350 802 0110, Nissan RF10/RE10 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 8.0kW 11T offer, availability, packing, lead time and freight options.