1113271 John Deere 12V 2.9kW Starter Motor Distributor Supply

1113271 John Deere Starter Motor B2B Supply

Elecdura supplies 1113271 for John Deere to parts distributors, rebuilders and fleet-service buyers. This 28MT replacement is specified as 12V, 2.9kW and 10T; keeping those facts beside the application makes sample comparison and repeat purchasing more consistent.

Export wholesaler teams handling scheduled stock refill should send 1113271, the John Deere record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address a controlled first sample, project delivery timing and the correct physical configuration in one useful commercial offer.

1113271 Starter Motor B2B Specification

The fastest useful fit check combines a square drive-end view with a side profile. Use both images to compare 10T pinion and 32mm reference, mounting face, drive reach, solenoid position and terminal orientation, then check the locating shoulder and pinion position with the old starter and proposed sample in the same orientation. This creates a reusable reference for later branch orders.

Use the machine plate or removed-starter label to confirm 12V; retain the listed 2.9kW and 10T data in the same record. Check cable-stud size and orientation before accepting a sample, since terminal interference may only become visible at installation.

1113271 Starter Motor Cross-References for Wholesale Supply

Treat 1113271 as the commercial anchor for this John Deere starter. Keep any additional reference available for lookup, while using voltage, output, pinion, mounting face and terminals to decide whether a proposed alternative belongs on the same order.

For scheduled stock refill, keep 1113271, John Deere, 12V, 2.9kW and 10T on one purchasing record. At goods-in, review label and reference traceability before releasing the lot. This gives the export wholesaler a documented basis for a controlled first sample when the next order is raised.

1113271 Starter Motor Wholesale Packaging and Replenishment

MOQ, packing and freight should reflect how the buyer will distribute the product. The normal minimum is 20 pieces and preparation is 7–15 days after confirmation; warranty coverage is 18 months under agreed terms, with labeling and documentation settled before shipment.

Demand from a multi-brand powertrain warehouse should keep 1113271 tied to John Deere. For scheduled stock refill, the export wholesaler can use a project-site reserve, mark the confirmed voltage and output and review label and reference traceability at goods-in. This supports a controlled first sample while keeping project delivery timing visible.

The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 1113271 application and specification shown above for their own product comparison.

1113271 John Deere Starter Motor FAQs

How can an export wholesaler source 1113271 for scheduled stock refill?

Export wholesaler teams should tie 1113271 to John Deere, 12V, 2.9kW, 10T and the removed-unit photographs before requesting price. For scheduled stock refill, state quantity, destination and delivery timing, then review label and reference traceability. Ask Elecdura to address project delivery timing and a controlled first sample in the same quotation.

Label and reference traceability check: What should a buyer include in the 1113271 quotation request?

Send the complete 1113271 reference, John Deere details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 2.9kW 10T unit, packing, lead time and freight in one focused offer. Use 1113271 when arranging project delivery timing.

During scheduled stock refill, how should 12V be confirmed for 1113271?

Check the machine electrical system, old-starter label and service record before ordering. Keep 2.9kW, 10T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. This supports a controlled first sample for 1113271.

During scheduled stock refill, which physical details matter most when comparing 1113271?

Compare 10T pinion and 32mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Keep 1113271 traceable through scheduled stock refill.

For scheduled stock refill handled by an export wholesaler, how should alternate references for 1113271 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Link 1113271 photographs to the label and reference traceability record.

For project delivery timing, what information helps review the 1113271 warranty enquiry?

Provide the invoice or lot reference, installation date, John Deere details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Carry the 1113271 result into project delivery timing.

To support a controlled first sample, how should branches keep 1113271 separate from similar starters?

Use the full reference, John Deere application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Retain 1113271 for a controlled first sample and receiving review.

To support a controlled first sample, when is a sample order useful for 1113271?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Retain the 1113271 result for scheduled stock refill.

Ask for 1113271 B2B Starter Motor Supply Terms

Email info@elecdurauto.com with 1113271, John Deere details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.9kW 10T offer, availability, packing, lead time and freight options.