Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
128000-9500
128000-9500
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
128000-9500
Cummins 4BT5.9L; 24V, 4.5kW, 13T, 40 mm pinion reference
Confirm 13T drive, 40 mm reference, flange geometry and terminal position, 24V, 4.5kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
This 128000-9500 for Cummins 4BT5.9L product line is aimed at B2B buyers handling starter demand. The 24V, 4.5kW, 13T specification helps separate this configuration from related units when several similar starters pass through the same parts counter.
The initial enquiry should show who will use the starter, which Cummins 4BT5.9L unit it serves and how many pieces are required. Pair that information with 128000-9500, old-unit photographs and the requested delivery date so sample and bulk options can be discussed on the same factual basis.
| Primary order identity | 128000-9500 |
| Target application | Cummins 4BT5.9L |
| Starter design | DENSO-type gear-reduction replacement |
| System voltage | 24V |
| Rated output | 4.5kW |
| Pinion identification | 13T / 40 mm reference |
| OE / reference group | 128000-9500 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
The key fit controls are 13T drive, 40 mm reference, flange geometry and terminal position. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.
The purchase record should state 24V, 4.5kW and 13T. Also compare solenoid position, battery-stud access and the control terminal with the removed unit. Cable reach or nearby components can make a different terminal orientation unsuitable even when the flange appears correct.
On cartons, purchase orders and customer quotations, retain the complete 128000-9500 string. Where 128000-9500 is also supplied, show each number in full rather than compressing them into one broad interchange statement; the application and unit still require a complete match.
For this engine requirement, purchasing teams should show voltage, application and product photographs together on every quotation and reorder. Keep the confirmed Cummins 4BT5.9L details, product photographs and received lot beside the item record so a later order can be compared with the same physical and commercial reference.
Buyers can request neutral packing or discuss private-label presentation for suitable volumes. The usual minimum is 20 pieces and lead time is normally 7–15 days after confirmation, while freight options are selected from the destination, carton quantity and required arrival date.
Use the buyer's real service pattern when sizing this line. Because it separates the 24V Cummins 4BT5.9L configuration from the 12V Case 580E product sharing the same reference, a central warehouse and a remote service point may need different reorder levels; note both in the enquiry if split delivery would reduce internal transfers.
The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 128000-9500 application and specification shown above for their own product comparison.
Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Record the 128000-9500 4.5kW outcome beside the Cummins 4BT5.9L application and received lot.
Check the machine electrical system, old-starter label and service record before ordering. Keep 4.5kW, 13T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Use the same 128000-9500 4.5kW record when the next Cummins 4BT5.9L order is raised.
The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Cummins 4BT5.9L, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Record the 128000-9500 4.5kW outcome beside the Cummins 4BT5.9L application and received lot.
Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Retain the 4.5kW 13T specification with the 128000-9500 4.5kW decision.
Use the full reference, Cummins 4BT5.9L application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Keep the result under the complete 128000-9500 4.5kW item record.
List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Keep the result under the complete 128000-9500 4.5kW item record.
Compare 13T drive, 40 mm reference, flange geometry and terminal position with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Apply the result to the 128000-9500 4.5kW Cummins 4BT5.9L line rather than an unrelated starter family.
Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Record the 128000-9500 4.5kW outcome beside the Cummins 4BT5.9L application and received lot.
Email info@elecdurauto.com with 128000-9500, Cummins 4BT5.9L details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 4.5kW 13T offer, availability, packing, lead time and freight options.
