Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
12V 2.8kW 11T 40mm RH
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
ND-KR Type RH Starter Configuration; 12V, 2.8kW, 11T, 40mm pinion reference
Confirm 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation, 12V, 2.8kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
12V 2.8kW 11T 40mm RH supports commercial sourcing for ND-KR Type RH Starter Configuration with the ND-KR-type replacement design. Buyers receive a clear 12V, 2.8kW and 11T specification that can be checked against the removed unit before quantity, packing and freight are finalized.
Branch inventory manager teams handling consolidated shipment should send 12V 2.8kW 11T 40mm RH, the ND-KR Type RH Starter Configuration record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address fewer fitment returns, consolidated freight planning and the correct physical configuration in one useful commercial offer.
| Primary order identity | 12V 2.8kW 11T 40mm RH |
| Target application | ND-KR Type RH Starter Configuration |
| Starter design | ND-KR-type replacement |
| System voltage | 12V |
| Rated output | 2.8kW |
| Pinion identification | 11T / 40mm reference |
| OE / reference group | Application and physical unit details |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
For sample confirmation, review 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation together with the overall drive-end reach. Measure or photograph the old unit on a flat surface where practical. Small differences at the flange or pinion can matter even when the motor and solenoid housings have similar proportions.
Electrical identity and mechanical fit must agree. Verify 12V, the 2.8kW rating and terminal layout, then count the 11 pinion teeth. A correct flange with the wrong system voltage, output or cable position is not an acceptable substitute.
Keep the reference group Application and physical unit details attached to the ND-KR Type RH Starter Configuration details and confirmed photographs. This gives branch staff a practical reorder record and prevents a number from being separated from the exact configuration previously received.
For consolidated shipment, keep 12V 2.8kW 11T 40mm RH, ND-KR Type RH Starter Configuration, 12V, 2.8kW and 11T on one purchasing record. At goods-in, review terminal clocking and cable clearance before releasing the lot. This gives the branch inventory manager a documented basis for fewer fitment returns when the next order is raised.
The quotation can address product price, carton format, labels, lead time and delivery method in one response. For qualified orders, Elecdura normally supplies from 20 pieces with 7–15 days preparation and an 18-month warranty, subject to the confirmed sales terms.
Demand from an industrial-engine distributor should keep 12V 2.8kW 11T 40mm RH tied to ND-KR Type RH Starter Configuration. For consolidated shipment, the branch inventory manager can use a repeat-lot release rule, separate neighboring cross-references and review terminal clocking and cable clearance at goods-in. This supports fewer fitment returns while keeping consolidated freight planning visible.
This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the 12V 2.8kW 11T 40mm RH order should still be based on the listed application, electrical data and physical unit checks.
Branch inventory manager teams should tie 12V 2.8kW 11T 40mm RH to ND-KR Type RH Starter Configuration, 12V, 2.8kW, 11T and the removed-unit photographs before requesting price. For consolidated shipment, state quantity, destination and delivery timing, then review terminal clocking and cable clearance. Ask Elecdura to address consolidated freight planning and fewer fitment returns in the same quotation.
Use active ND-KR Type RH Starter Configuration customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Retain 12V 2.8kW 11T 40mm RH for fewer fitment returns and receiving review.
No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 40mm reference, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Retain the 12V 2.8kW 11T 40mm RH result for consolidated shipment.
Send the complete 12V 2.8kW 11T 40mm RH reference, ND-KR Type RH Starter Configuration details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 2.8kW 11T unit, packing, lead time and freight in one focused offer. File 12V 2.8kW 11T 40mm RH with the terminal clocking and cable clearance check.
Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Use 12V 2.8kW 11T 40mm RH when arranging consolidated freight planning.
List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. This supports fewer fitment returns for 12V 2.8kW 11T 40mm RH.
Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Keep 12V 2.8kW 11T 40mm RH traceable through consolidated shipment.
A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Link 12V 2.8kW 11T 40mm RH photographs to the terminal clocking and cable clearance record.
Email info@elecdurauto.com with 12V 2.8kW 11T 40mm RH, ND-KR Type RH Starter Configuration details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.8kW 11T offer, availability, packing, lead time and freight options.
