Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
19011511
19011511
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
19011511
Cummins 39MT; 24V, 8.5kW, 12T, 46mm pinion reference
Confirm 12T pinion and 46mm reference, mounting face, drive reach and terminal orientation, 24V, 8.5kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
19011511 8.5kW supports commercial sourcing for Cummins 39MT with the application-matched replacement design. Buyers receive a clear 24V, 8.5kW and 12T specification that can be checked against the removed unit before quantity, packing and freight are finalized.
Machine-repair contractor teams handling multi-branch transfer should send 19011511 8.5kW, the Cummins 39MT record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address shorter machine downtime, mixed-SKU export packing and the correct physical configuration in one useful commercial offer.
| Primary order identity | 19011511 8.5kW |
| Target application | Cummins 39MT |
| Starter design | application-matched replacement |
| System voltage | 24V |
| Rated output | 8.5kW |
| Pinion identification | 12T / 46mm reference |
| OE / reference group | 19011511 |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
The key fit controls are 12T pinion and 46mm reference, mounting face, drive reach and terminal orientation. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.
A correct replacement must satisfy both the 24V 8.5kW electrical requirement and the 12T drive specification. Inspect the control-terminal connection and battery-cable route as part of the fit check rather than treating them as an after-installation detail.
Use 19011511 8.5kW as the primary searchable order identity. If the label or service record shows an alternate reference, list its complete format and source on a separate RFQ line until voltage, output, drive and mounting have all been compared.
For multi-branch transfer, keep 19011511 8.5kW, Cummins 39MT, 24V, 8.5kW and 12T on one purchasing record. At goods-in, review flange and locating-register fit before releasing the lot. This gives the machine-repair contractor a documented basis for shorter machine downtime when the next order is raised.
Elecdura supports qualified wholesale orders from 20 pieces, with normal preparation of 7–15 days after order confirmation and an 18-month warranty under agreed sales terms. Neutral packaging is available, and private-label requirements can be reviewed against order quantity, artwork and delivery schedule.
Demand from a diesel rebuild bench should keep 19011511 8.5kW tied to Cummins 39MT. For multi-branch transfer, the machine-repair contractor can use a fast-moving counter stock, archive the carton and lot label and review flange and locating-register fit at goods-in. This supports shorter machine downtime while keeping mixed-SKU export packing visible.
Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 19011511 8.5kW, Cummins 39MT and the confirmed physical configuration on the quotation.
Machine-repair contractor teams should tie 19011511 8.5kW to Cummins 39MT, 24V, 8.5kW, 12T and the removed-unit photographs before requesting price. For multi-branch transfer, state quantity, destination and delivery timing, then review flange and locating-register fit. Ask Elecdura to address mixed-SKU export packing and shorter machine downtime in the same quotation.
Check the machine electrical system, old-starter label and service record before ordering. Keep 8.5kW, 12T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Retain the 19011511 8.5kW result for multi-branch transfer.
The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Cummins 39MT, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Retain 19011511 8.5kW for shorter machine downtime and receiving review.
Send the complete 19011511 reference, Cummins 39MT details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 8.5kW 12T unit, packing, lead time and freight in one focused offer. Use 19011511 8.5kW when arranging mixed-SKU export packing.
A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Keep 19011511 8.5kW traceable through multi-branch transfer.
Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Link 19011511 8.5kW photographs to the flange and locating-register fit record.
Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Use 19011511 8.5kW when arranging mixed-SKU export packing.
Compare 12T pinion and 46mm reference, mounting face, drive reach and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. This supports shorter machine downtime for 19011511 8.5kW.
Email info@elecdurauto.com with 19011511 8.5kW, Cummins 39MT details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 8.5kW 12T offer, availability, packing, lead time and freight options.
