228000-0841 John Deere Starter Motor 12V 2.5kW 10T

228000-0841 John Deere Starter Motor Sourcing Control for Wholesale Buyers

B2B approval of 228000-0841 starts with the 12V, 2.5kW, 10-tooth clockwise configuration and the stated use in John Deere vehicles and equipment cross-referenced to 228000-0841. Confirm the complete label, flange, drive-end geometry, pinion and terminal position before a sample or production lot is released for the buyer's stock.

Treat 228000-0841 as one controlled purchasing identity. Keep 228000-0841 / 228000-0844 / 18456, John Deere vehicles and equipment cross-referenced to 228000-0841, the approved dimensional record and the signed sample together in the sourcing file. If a future offer changes any suffix, rating or drive-end detail, reopen technical approval before comparing price or delivery. This keeps distributor quotations tied to the part actually reviewed rather than to a visually similar starter family.

228000-0841 Starter Motor B2B Production and Test Video for Wholesale Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 228000-0841.

228000-0841 Starter Motor Distributor Specifications for Distributor Sourcing

228000-0841 Starter Motor OE Cross-Reference Review for Bulk Procurement

Use 228000-0841 as the primary purchasing reference and cross-check 228000-0844, 18456. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

228000-0841 Starter Motor Bulk Fitment Approval for B2B Supply

Before accepting 228000-0841 as a replacement, obtain the full vehicle, machine or engine record and compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation. Cross-reference overlap is useful for finding the family, but it cannot replace a physical match. Store the approved label and four-angle photo set with the account so later orders use the same configuration.

228000-0841 Starter Motor Wholesale Receiving Inspection for Aftermarket Buyers

Receiving control should link the carton, unit label and inspection sample to 228000-0841. Verify rating label, tooth count, mounting face, corrosion protection, terminals and lot marking; photograph deviations and keep affected units separate while the supplier responds. Batch evidence makes repeat purchases more predictable and gives warranty teams a clear record if field feedback appears.

228000-0841 Starter Motor MOQ and Private-Label Supply for Fleet Replacement

228000-0841 Starter Motor Distributor FAQ for Wholesale Supply

What packaging options are available for 228000-0841 distributors?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

What records support a fair 228000-0841 warranty review?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product prior to instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which reference numbers should buyers confirm for 228000-0841?

Use 228000-0841 as the control reference and cross-check 228000-0844, 18456. Retain the complete old-unit label plus drive-end, mounting-face and rear-terminal photos with the quotation and purchase line so repeat orders remain tied to the approved unit.

Which applications should buyers confirm for the 228000-0841 starter motor?

The specified application is John Deere vehicles and equipment cross-referenced to 228000-0841. Because a model or engine family can include production changes, confirm the machine, vehicle or engine record and the complete old-unit suffix before promising fitment. Keep the approved record tied to one physical starter configuration.

Which electrical and drive specifications define 228000-0841?

The specified configuration is 12V, 2.5kW, 10-tooth clockwise configuration. Voltage must match the electrical system, while power, tooth count and rotation affect cranking performance and ring-gear engagement. Put all four values on the sample-approval sheet and verify the physical pinion before releasing a distributor quantity.

Why is suffix-level verification important for 228000-0841?

Confirm the complete 228000-0841 / 228000-0844 / 18456 group together with the 12V, 2.5kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

What physical fitment checks are required for 228000-0841?

Compare the tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation with the removed starter. Inspect bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment document is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

What receiving checks protect a 228000-0841 bulk order?

Tie every carton and sampled unit to 228000-0841, the approved cross-reference set and the supplier lot. Inspect rating label, tooth count, mounting face, corrosion protection, terminals and lot marking, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a wrong starter during planting or harvest can cost far more than the unit price in lost operating hours. This receiving discipline is cheaper than sorting returns after distribution.

Should a visually similar starter be sold as 228000-0841?

A substitute is acceptable only when its complete OE relationship, 12V system, 2.5kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Request a B2B Quote for 228000-0841 Starter Motors

Send the complete reference, John Deere vehicles and equipment cross-referenced to 228000-0841, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.