228000-0844 Bedford BF J6 Starter Motor Wholesale

228000-0844 Bedford BF J6 Starter Motor for Wholesale Enquiries

228000-0844 is listed for Bedford BF J6 service as an ND-type 12V starter rated at 2.5kW with a 10T drive and 40 mm pinion reference. Distributors should keep that complete specification on the enquiry because the same general design language is used across many compact gear-reduction starters.

A useful RFQ pairs 228000-0844 with the BF J6 application and photographs taken square to the front mounting face, drive side and terminals. Add quantity, destination and target arrival date so Elecdura can prepare one focused replacement offer rather than asking the buyer to choose from several similar bodies.

228000-0844 Starter Motor Technical Match for B2B Orders

Start with the three-point mounting pattern visible at the drive end. Compare the locating shoulder, ear positions and the relationship between the pinion and flange, then verify 10 teeth and the specified 40 mm reference. These controls are more useful than comparing paint, solenoid color or an angled product photograph.

Next confirm 12V and 2.5kW from the Bedford order record and inspect the terminal-side cable path. A terminal that faces the wrong direction can create installation interference even when the drive end appears close, so include a clear rear photograph before releasing a sample or bulk order.

228000-0844 Starter Motor Reference Handling for Bedford Importers

Use the complete hyphenated 228000-0844 number in purchasing records, carton labels and customer quotations. Shortened strings can overlap with other starter families, while the full reference gives sales and receiving teams a common identity to compare with the BF J6 application and physical unit.

When an alternate number is proposed, do not replace 228000-0844 in the record until the voltage, output, pinion, mounting face and terminals have been checked together. Keep unmatched alternatives on separate RFQ lines so a buyer can see exactly which configuration is being priced.

228000-0844 Distributor Supply, Packing and Reorder Planning

Wholesale supply starts from 20 pieces, with normal production or preparation time of 7–15 days after order confirmation and an 18-month warranty under agreed terms. The quotation can cover neutral packing, private-label review and shipping choices based on the destination and required arrival date.

For regional distribution, record whether 228000-0844 is intended for a single legacy-vehicle specialist or several branches. That distinction affects sample quantity, reorder level and carton labeling, and it helps prevent the BF J6 stock line from being combined with unrelated ND-type starters during replenishment.

The video introduces Elecdura starter-motor production and electrical testing for B2B supply. Product selection remains tied to the specific application, electrical rating, pinion and physical checks stated above, while the video helps buyers review factory and quality-control capability.

228000-0844 Bedford BF J6 Procurement Questions

Which facts make a 228000-0844 RFQ specific enough for quotation?

Include the full 228000-0844 number, Bedford BF J6 application, 12V 2.5kW rating, 10T drive and requested quantity. Attach front, side and terminal photographs of the removed unit and state the destination and timing. This information allows pricing, packing and availability to be tied to one defined starter configuration.

What is the most reliable way to compare the 228000-0844 mounting face?

Photograph the removed starter square to the flange and include a ruler or known reference where practical. Compare the locating shoulder, three mounting positions and pinion relationship, then review the side projection. The mounting face should be treated as one pattern; matching only one ear or outside diameter can produce a misleading result.

Why does terminal orientation matter on a Bedford BF J6 replacement?

The main battery cable and control lead must reach the solenoid without being stretched, sharply bent or routed against nearby components. Ask for a direct terminal-side photograph and compare stud positions before shipment. A starter can share the correct voltage and drive while still creating a cable-clearance problem during installation.

How should a purchasing team record an alternate number offered for 228000-0844?

Keep the alternate reference on a separate line and show where it came from, such as the removed-unit label or a customer record. Do not merge it automatically with 228000-0844. Compare the 12V 2.5kW rating, 10T drive, 40 mm reference, mounting face and terminals before accepting one physical replacement.

Which cranking-circuit readings help evaluate a complaint before changing this starter?

Measure battery voltage under load and voltage drop on the positive and ground sides while the engine is cranking. Check cable size, lug condition, chassis ground, control signal and ring gear. These readings help distinguish a starter fault from high resistance, weak battery capacity or a mechanical condition that raises cranking load.

How can an importer reduce mistakes when receiving 228000-0844 in bulk?

Use the approved product photographs and specification on the purchase order. At receiving, compare labels, quantity and packaging, then sample the mounting face, 10T pinion, solenoid and terminal orientation. Quarantine any mixed or damaged unit with carton and lot photographs before it is allocated to Bedford customer orders.

What stock information helps set a reorder level for 228000-0844?

Combine recent sales, active BF J6 customers, replenishment time and the cost of emergency freight. Separate evaluation samples from normal branch stock, and keep the approved physical record beside the inventory code. A clear reorder point is more reliable than purchasing a mixed group whenever one workshop reports an urgent requirement.

How should service evidence be prepared for a 228000-0844 warranty enquiry?

Identify the shipment, unit and installation, describe the exact symptom and record service time. Add images of the starter, flange, pinion and terminals plus battery and cable-test results. Retain the removed unit without further disassembly until Elecdura confirms what evidence or return process is required under the agreed terms.

Ask for a 228000-0844 Bedford Starter Motor Quote

Email the complete 228000-0844 requirement to info@elecdurauto.com, including Bedford BF J6 application details, old-starter photographs, quantity, delivery country and required date. Elecdura will confirm the specified 12V 2.5kW 10T unit, commercial terms and shipping plan.