228000-3840 Ford Maxi R2 12V 2.0kW Starter Motor Bulk Supply

228000-3840 Ford Maxi R2 Starter Motor B2B Purchasing Overview

Distributors supporting Ford Maxi R2 can source 228000-3840 in the ND-type replacement configuration. The stated 12V, 2.0kW rating and 9T pinion are kept visible because this product provides Ford Maxi R2 buyers with a controlled 9T replacement line for sample-to-volume purchasing; they should remain on the purchase order and receiving record.

Service network teams handling sample validation should send 228000-3840, the Ford Maxi R2 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address fewer fitment returns, planned warehouse release and the correct physical configuration in one useful commercial offer.

228000-3840 Starter Motor Wholesale Fitment Checks

A practical distributor check records 9T pinion and 29mm reference, mounting face, drive reach, solenoid position and terminal orientation before the sample enters stock. Add a view of the flange depth and pinion reach so sales staff can answer later enquiries from documented dimensions rather than an assumption based on the general starter family.

The 2.0kW output and 9T drive belong together with 12V. Record all three rather than quoting power alone, and include a terminal-side photograph so the B+ cable, control wire and nearby clearances can be reviewed before shipment.

228000-3840 Ford Maxi R2 Starter Motor Reference Control for Distributors

Treat 228000-3840 as the commercial anchor for this Ford Maxi R2 starter. Keep any additional reference available for lookup, while using voltage, output, pinion, mounting face and terminals to decide whether a proposed alternative belongs on the same order.

For sample validation, keep 228000-3840, Ford Maxi R2, 12V, 2.0kW and 9T on one purchasing record. At goods-in, review terminal clocking and cable clearance before releasing the lot. This gives the service network a documented basis for fewer fitment returns when the next order is raised.

228000-3840 Starter Motor B2B Supply for Ford Maxi R2

The wholesale offer is built around confirmed product identity, quantity and destination. Standard orders begin at 20 pieces, preparation is normally 7–15 days, and the 18-month warranty follows the agreed sales terms; export packing and label needs are stated before production or allocation.

Demand from an industrial-engine distributor should keep 228000-3840 tied to Ford Maxi R2. For sample validation, the service network can use a repeat-lot release rule, capture the terminal-side view and review terminal clocking and cable clearance at goods-in. This supports fewer fitment returns while keeping planned warehouse release visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 228000-3840, Ford Maxi R2 and the confirmed physical configuration on the quotation.

228000-3840 Ford Maxi R2 Starter Motor FAQs

How can a service network source 228000-3840 for sample validation?

Service network teams should tie 228000-3840 to Ford Maxi R2, 12V, 2.0kW, 9T and the removed-unit photographs before requesting price. For sample validation, state quantity, destination and delivery timing, then review terminal clocking and cable clearance. Ask Elecdura to address planned warehouse release and fewer fitment returns in the same quotation.

Service network receiving review: What should a buyer include in the 228000-3840 quotation request?

Send the complete 228000-3840 reference, Ford Maxi R2 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 2.0kW 9T unit, packing, lead time and freight in one focused offer. Retain the 228000-3840 result for sample validation.

For sample validation handled by a service network, is a matching 9T pinion enough to approve 228000-3840?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 29mm reference, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Retain the 228000-3840 result for sample validation.

For sample validation handled by a service network, which physical details matter most when comparing 228000-3840?

Compare 9T pinion and 29mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Link 228000-3840 photographs to the terminal clocking and cable clearance record.

For sample validation handled by a service network, how can a distributor plan stock for 228000-3840?

Use active Ford Maxi R2 customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Use 228000-3840 when arranging planned warehouse release.

Fewer fitment returns: What should receiving staff inspect on the 228000-3840 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Ford Maxi R2 inventory. Carry the 228000-3840 result into planned warehouse release.

Fewer fitment returns: What should be checked before installing the 228000-3840 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. This supports fewer fitment returns for 228000-3840.

Service network receiving review: How should 12V be confirmed for 228000-3840?

Check the machine electrical system, old-starter label and service record before ordering. Keep 2.0kW, 9T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Carry the 228000-3840 result into planned warehouse release.

Request 228000-3840 Starter Motor Wholesale Pricing

Email info@elecdurauto.com with 228000-3840, Ford Maxi R2 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.0kW 9T offer, availability, packing, lead time and freight options.