228000-4241 Isuzu 6HE1 24V 4.5kW Starter Motor B2B Supply

228000-4241 Isuzu 6HE1 Starter Motor Wholesale Overview

228000-4241 for Isuzu 6HE1 is presented for wholesale enquiries with the listed 24V, 4.5kW and 11T specification. That precise identity gives commercial buyers a practical starting point for checking fit, availability, packing and delivery without relying on a broad starter-family description.

Rebuild workshop buyer teams handling first-order sourcing should send 228000-4241, the Isuzu 6HE1 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address consistent rebuild-bench identification, branch-ready labels and the correct physical configuration in one useful commercial offer.

228000-4241 Starter Motor Wholesale Fitment Checks

Compare 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation first, then inspect the housing clearance around the drive end. The purpose is to confirm how the unit mounts and engages, not merely whether it resembles another starter in the warehouse.

For technical sign-off, compare the stated 24V, 4.5kW and 11T data with the removed unit or service record. Then inspect solenoid clocking and terminal direction. These checks keep an electrical match from being undermined by a cable-access problem.

228000-4241 Starter Motor Distributor Reorder Identification

228000-4241 should remain the lead reference for this Isuzu 6HE1 line. Cross-references are useful for discovery, but the buyer should accept them only after the 24V, 4.5kW, 11T, mounting and terminal details agree with the removed starter.

For first-order sourcing, keep 228000-4241, Isuzu 6HE1, 24V, 4.5kW and 11T on one purchasing record. At goods-in, review branch stock-location control before releasing the lot. This gives the rebuild workshop buyer a documented basis for consistent rebuild-bench identification when the next order is raised.

228000-4241 Starter Motor B2B Supply for Isuzu 6HE1

For qualified B2B orders, the normal MOQ is 20 pieces and preparation is usually 7–15 days after the order is confirmed. Elecdura can discuss neutral cartons, private-label review, export documents and an 18-month warranty according to the agreed quotation.

Demand from a mobile diesel service network should keep 228000-4241 tied to Isuzu 6HE1. For first-order sourcing, the rebuild workshop buyer can use an engine-rebuild allocation, retain the accepted sample photographs and review branch stock-location control at goods-in. This supports consistent rebuild-bench identification while keeping branch-ready labels visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep 228000-4241, Isuzu 6HE1 and the confirmed physical configuration on the quotation.

228000-4241 Isuzu 6HE1 Starter Motor FAQs

How can a rebuild workshop buyer source 228000-4241 for first-order sourcing?

Rebuild workshop buyer teams should tie 228000-4241 to Isuzu 6HE1, 24V, 4.5kW, 11T and the removed-unit photographs before requesting price. For first-order sourcing, state quantity, destination and delivery timing, then review branch stock-location control. Ask Elecdura to address branch-ready labels and consistent rebuild-bench identification in the same quotation.

To support consistent rebuild-bench identification, what information helps review the 228000-4241 warranty enquiry?

Provide the invoice or lot reference, installation date, Isuzu 6HE1 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Keep 228000-4241 traceable through first-order sourcing.

To support consistent rebuild-bench identification, what should a buyer include in the 228000-4241 quotation request?

Send the complete 228000-4241 reference, Isuzu 6HE1 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 4.5kW 11T unit, packing, lead time and freight in one focused offer. File 228000-4241 with the branch stock-location control check.

Branch-ready labels question: What lead-time details should be stated for the 228000-4241 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Link 228000-4241 photographs to the branch stock-location control record.

Branch-ready labels question: What should be checked before installing the 228000-4241 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Use 228000-4241 when arranging branch-ready labels.

Branch-ready labels question: When is a sample order useful for 228000-4241?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Retain 228000-4241 for consistent rebuild-bench identification and receiving review.

Branch stock-location control check: Is a matching 11T pinion enough to approve 228000-4241?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 40mm reference, solenoid position, terminals and 24V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. This supports consistent rebuild-bench identification for 228000-4241.

For branch-ready labels, what should receiving staff inspect on the 228000-4241 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Isuzu 6HE1 inventory. Link 228000-4241 photographs to the branch stock-location control record.

Contact Elecdura for 228000-4241 Starter Motor Pricing

Email info@elecdurauto.com with 228000-4241, Isuzu 6HE1 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 4.5kW 11T offer, availability, packing, lead time and freight options.