2280008470 John Deere Starter Motor 4.8kW

2280008470 John Deere Starter Motor Replacement Supply for B2B Procurement

2280008470 is intended for procurement against John Deere vehicles and equipment cross-referenced to 2280008470 with a Confirm by OE/sample, 4.8kW, Confirm by OE/sample-tooth clockwise configuration. Keep the approved unit photos, application record and full reference group together so future quotations and repeat orders stay linked to the same physical starter.

The distributor record for 2280008470 should connect the reference group 2280008470 / DSN2009 / AT195414 / RE502811 with John Deere vehicles and equipment cross-referenced to 2280008470. Add the old-unit label, mounting-face image, terminal view and receiving result to that record. Reuse it for repeat quotations, but create a new revision whenever the supplier changes the suffix, housing, pinion or electrical rating. A disciplined record reduces avoidable substitutions during urgent replenishment.

2280008470 Starter Motor B2B Production and Test Video for Wholesale Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 2280008470.

2280008470 Starter Motor Distributor Specifications for Distributor Sourcing

2280008470 Starter Motor OE Cross-Reference Review for Bulk Procurement

Use 2280008470 as the primary purchasing reference and cross-check DSN2009, AT195414, RE502811. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

2280008470 Starter Motor Bulk Fitment Approval for B2B Supply

Confirm the complete 2280008470 / DSN2009 / AT195414 / RE502811 group together with the Confirm by OE/sample, 4.8kW, Confirm by OE/sample-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

2280008470 Starter Motor Wholesale Receiving Inspection for Aftermarket Buyers

For a wholesale shipment, sample units across the 2280008470 lot rather than inspecting only the top carton. Compare rating label, tooth count, mounting face, corrosion protection, terminals and lot marking with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

2280008470 Starter Motor MOQ and Private-Label Supply for Fleet Replacement

2280008470 Starter Motor Distributor FAQ for Wholesale Supply

How can buyers separate a 2280008470 fault from an equipment fault?

Inspect battery load condition, ground path, safety-start circuit, cable drop and ring-gear wear before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a 2280008470 RFQ technically complete?

Send 2280008470 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for 2280008470?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment evidence is incomplete. Mark the approved sample with 2280008470, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 2280008470 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling prior to production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on 2280008470 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable supporting evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete supporting evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 2280008470?

Use 2280008470 as the control reference and compare the complete group 2280008470 / DSN2009 / AT195414 / RE502811. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one RFQ and order line so repeat orders remain traceable.

Where is 2280008470 commonly used, and what still needs confirmation?

Confirm the complete 2280008470 / DSN2009 / AT195414 / RE502811 group together with the Confirm by OE/sample, 4.8kW, Confirm by OE/sample-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on 2280008470?

Confirm the complete 2280008470 / DSN2009 / AT195414 / RE502811 group together with the Confirm by OE/sample, 4.8kW, Confirm by OE/sample-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched 2280008470 order?

Confirm the complete 2280008470 / DSN2009 / AT195414 / RE502811 group together with the Confirm by OE/sample, 4.8kW, Confirm by OE/sample-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

Request a B2B Quote for 2280008470 Starter Motors

Send the complete reference, John Deere vehicles and equipment cross-referenced to 2280008470, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.