Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
24V 8.5kW 10T
24V 8.5kW 10T
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
24V 8.5kW 10T
forklift applications; 24V, 8.5kW, 10T
Confirm 10T pinion, mounting face, drive reach and terminal orientation, 24V, 8.5kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
24V 8.5kW 10T for forklift applications is presented for wholesale enquiries with the listed 24V, 8.5kW and 10T specification. That precise identity gives commercial buyers a practical starting point for checking fit, availability, packing and delivery without relying on a broad starter-family description.
Regional parts dealer teams handling scheduled stock refill should send 24V 8.5kW 10T, the forklift applications record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address predictable export packing, consolidated freight planning and the correct physical configuration in one useful commercial offer.
| Primary order identity | 24V 8.5kW 10T |
| Target application | forklift applications |
| Starter design | application-specific replacement |
| System voltage | 24V |
| Rated output | 8.5kW |
| Pinion identification | 10T / confirm dimensions from the removed unit |
| OE / reference group | 24V 8.5kW 10T |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
Do not approve 24V 8.5kW 10T from the label alone. Match 10T pinion, mounting face, drive reach and terminal orientation, followed by the locating surface and drive projection. If one point differs, keep the unit on hold until the engine or machine record explains the difference.
For technical sign-off, compare the stated 24V, 8.5kW and 10T data with the removed unit or service record. Then inspect solenoid clocking and terminal direction. These checks keep an electrical match from being undermined by a cable-access problem.
Use 24V 8.5kW 10T as the primary searchable order identity. If the label or service record shows an alternate reference, list its complete format and source on a separate RFQ line until voltage, output, drive and mounting have all been compared.
For scheduled stock refill, keep 24V 8.5kW 10T, forklift applications, 24V, 8.5kW and 10T on one purchasing record. At goods-in, review received-lot sample retention before releasing the lot. This gives the regional parts dealer a documented basis for predictable export packing when the next order is raised.
The quotation can address product price, carton format, labels, lead time and delivery method in one response. For qualified orders, Elecdura normally supplies from 20 pieces with 7–15 days preparation and an 18-month warranty, subject to the confirmed sales terms.
Demand from a plant maintenance store should keep 24V 8.5kW 10T tied to forklift applications. For scheduled stock refill, the regional parts dealer can use a scheduled maintenance buffer, separate neighboring cross-references and review received-lot sample retention at goods-in. This supports predictable export packing while keeping consolidated freight planning visible.
The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 24V 8.5kW 10T application and specification shown above for their own product comparison.
Regional parts dealer teams should tie 24V 8.5kW 10T to forklift applications, 24V, 8.5kW, 10T and the removed-unit photographs before requesting price. For scheduled stock refill, state quantity, destination and delivery timing, then review received-lot sample retention. Ask Elecdura to address consolidated freight planning and predictable export packing in the same quotation.
Compare 10T pinion, mounting face, drive reach and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Link 24V 8.5kW 10T photographs to the received-lot sample retention record.
Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Retain 24V 8.5kW 10T for predictable export packing and receiving review.
Send the complete 24V 8.5kW 10T reference, forklift applications details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 8.5kW 10T unit, packing, lead time and freight in one focused offer. Retain the 24V 8.5kW 10T result for scheduled stock refill.
Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal forklift applications inventory. Keep 24V 8.5kW 10T traceable through scheduled stock refill.
The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping forklift applications, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Retain 24V 8.5kW 10T for predictable export packing and receiving review.
A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Carry the 24V 8.5kW 10T result into consolidated freight planning.
Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Carry the 24V 8.5kW 10T result into consolidated freight planning.
Email info@elecdurauto.com with 24V 8.5kW 10T, forklift applications details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 8.5kW 10T offer, availability, packing, lead time and freight options.
