28100-2862 Hino K13D E13C Starter Motor Wholesale

28100-2862 Starter Motor Distributor Application Guide for Hino K13D and E13C engine

For a fleet parts team, 28100-2862 identifies one Hino K13D and E13C engine requirement. The 24V 7.5kW 11T module-3.5 K13D/E13C specified configuration provides a clear fitment boundary for sample, stock and replacement reviews.

Build the 28100-2862 RFQ around the complete removed-unit number, exact machine or engine information, mounting-face and terminal-side photographs, quantity and delivery point. These details let Elecdura quote the specified starter, export packing and timing without turning the offer into a general application guess.

28100-2862 Starter Motor Specifications and Drawing for Wholesale Buyers

Use the 28100-2862 technical drawing to check Ø121.5 mm locating diameter, 50 mm drive-end distance and Ø160 mm mounting-hole circle. Add the 3 mounting holes shown as 16, 16, 16 mm to the receiving sheet. These are practical controls for an approved sample because they can be measured before the starter is installed or released to branch stock.

The 28100-2862 drive-end decision is completed by 11T, module 3.5 and CW, together with 24V and 7.5kW. Confirm main-terminal and control-terminal positions under the actual cable routing. Similar dimensions do not compensate for the wrong rotation, pinion or electrical rating.

28100-2862 Starter Motor Reference Group for Wholesale Sourcing

• Use the full number: Start with 28100-2862, 28100-2862A, 28100-2863, 0365-602-0011, 19102N, retaining prefixes, suffixes and separators in the RFQ.
• Confirm the hardware: The final match requires the stated electrical rating, drive, mounting interface and terminal side; unmatched versions should remain separate.

28100-2862 Starter Motor Wholesale Ordering and Export Support

For a bulk order of 28100-2862, Elecdura confirms availability, packing, lead time and freight against the required quantity and destination. Standard terms begin at 20 pieces, normally require 7–15 days after confirmation and include an 18-month warranty under the final sales agreement.

Buyers can state service urgency, supported equipment count and expected monthly use in the same RFQ. Elecdura can then discuss stock, production, packaging and staged delivery while maintaining the specified 28100-2862 drive end and electrical rating throughout the order.

Elecdura’s video shows starter-motor production and electrical testing used to support wholesale orders. It provides supplier-capability context for 28100-2862; the product decision itself still depends on the complete reference, 24V 7.5kW rating, drive end, mounting face and terminal layout.

28100-2862 Starter Motor Questions from Commercial Buyers

Which checks should follow an OE-number match for 28100-2862 in a Hino K13D E13C branch sourcing program?

A number match narrows the search but does not finish it. For 28100-2862, compare the stated application, electrical output, 11T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

What should a distributor match before ordering 28100-2862 for Hino K13D and E13C engine during branch sourcing?

Use the full old-unit number and Hino K13D and E13C engine record. Compare the 11T pinion, 3 mounting holes shown as 16, 16, 16 mm, Ø121.5 mm locating diameter and terminal side. Reject a candidate when its drive position, mounting face or cable connection differs.

How can a service team rule out cable or battery faults before fitting 28100-2862 during a Hino K13D E13C branch electrical check?

Record battery voltage at rest and during the start attempt, then test both main cables under load. Check grounds, terminal tightness and the control feed to the solenoid. Supplying those readings with an enquiry for 28100-2862 helps the workshop avoid replacing a sound starter when the actual fault is elsewhere.

Which 28100-2862 dimensions are practical for a warehouse inspection during a Hino K13D E13C branch inspection?

For 28100-2862, check 3 mounting holes shown as 16, 16, 16 mm, Ø121.5 mm locating diameter and 50 mm drive-end distance. Record the 11T pinion, rotation and terminal position so the warehouse can isolate a mixed or incorrectly labelled unit before dispatch.

What demand information helps set a sensible reorder level for 28100-2862 in a Hino K13D E13C branch program?

Build the forecast around actual equipment counts, failure history and the time needed to replenish each service location. For 28100-2862, keep the specified pinion and mounting interface visible in the stock record. This reduces emergency substitutions and gives purchasing a clearer basis for MOQ, packing and delivery discussions.

Which physical points should be checked before 28100-2862 enters branch stock during a Hino K13D E13C branch receiving check?

For 28100-2862, match carton and product labels to the purchase order, then sample 24V, 11T, 3 mounting holes shown as 16, 16, 16 mm and terminal protection. Check the flange and pinion for shipping damage. Record lot numbers and arrival photographs, and isolate any different configuration before it is placed in saleable stock.

Which order conditions should be stated when asking about 28100-2862 in a Hino K13D E13C branch sourcing program?

A useful RFQ states 28100-2862, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

Which test results help investigate a returned 28100-2862 starter in a Hino K13D E13C branch review?

For a service review of 28100-2862, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

28100-2862 Send a Starter Motor Distributor Enquiry

A complete RFQ for 28100-2862 should state the application, removed-unit number, physical photographs, quantity, destination and delivery target. Send these details to info@elecdurauto.com for a direct response on the correct 24V 7.5kW 11T CW starter, MOQ, packaging, warranty and shipping choices.