28MT Mercedes Trucks 12V 3.0kW Starter Motor Bulk Supply

28MT Mercedes Trucks Starter Motor B2B Purchasing Overview

Distributors supporting Mercedes Trucks can source 28MT in the 28MT replacement configuration. The stated 12V, 3.0kW rating and 9T pinion are kept visible because this product supports Mercedes Trucks fleet and dealer enquiries that need a precise starter identity for availability, packing and repeat supply; they should remain on the purchase order and receiving record.

Export wholesaler teams handling urgent replacement should send 28MT, the Mercedes Trucks record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address shorter machine downtime, sample-to-bulk scheduling and the correct physical configuration in one useful commercial offer.

28MT Starter Motor B2B Specification

The fastest useful fit check combines a square drive-end view with a side profile. Use both images to compare 9T pinion and 36mm reference, mounting face, drive reach, solenoid position and terminal orientation, then check the locating shoulder and pinion position with the old starter and proposed sample in the same orientation. This creates a reusable reference for later branch orders.

The 3.0kW output and 9T drive belong together with 12V. Record all three rather than quoting power alone, and include a terminal-side photograph so the B+ cable, control wire and nearby clearances can be reviewed before shipment.

28MT Starter Motor Distributor Reorder Identification

Treat 28MT as the commercial anchor for this Mercedes Trucks starter. Keep any additional reference available for lookup, while using voltage, output, pinion, mounting face and terminals to decide whether a proposed alternative belongs on the same order.

For urgent replacement, keep 28MT, Mercedes Trucks, 12V, 3.0kW and 9T on one purchasing record. At goods-in, review flange and locating-register fit before releasing the lot. This gives the export wholesaler a documented basis for shorter machine downtime when the next order is raised.

28MT Starter Motor Wholesale Terms and Supply Support

MOQ, packing and freight should reflect how the buyer will distribute the product. The normal minimum is 20 pieces and preparation is 7–15 days after confirmation; warranty coverage is 18 months under agreed terms, with labeling and documentation settled before shipment.

Demand from a fleet maintenance depot should keep 28MT tied to Mercedes Trucks. For urgent replacement, the export wholesaler can use a fast-moving counter stock, record the removed-unit dimensions and review flange and locating-register fit at goods-in. This supports shorter machine downtime while keeping sample-to-bulk scheduling visible.

The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the 28MT application and specification shown above for their own product comparison.

28MT Mercedes Trucks Starter Motor FAQs

How can an export wholesaler source 28MT for urgent replacement?

Export wholesaler teams should tie 28MT to Mercedes Trucks, 12V, 3.0kW, 9T and the removed-unit photographs before requesting price. For urgent replacement, state quantity, destination and delivery timing, then review flange and locating-register fit. Ask Elecdura to address sample-to-bulk scheduling and shorter machine downtime in the same quotation.

Flange and locating-register fit check: Is a matching 9T pinion enough to approve 28MT?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 36mm reference, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Retain the 28MT result for urgent replacement.

For sample-to-bulk scheduling, what lead-time details should be stated for the 28MT order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. File 28MT with the flange and locating-register fit check.

To support shorter machine downtime, how should 12V be confirmed for 28MT?

Check the machine electrical system, old-starter label and service record before ordering. Keep 3.0kW, 9T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Use 28MT when arranging sample-to-bulk scheduling.

Shorter machine downtime: What should be checked before installing the 28MT starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. This supports shorter machine downtime for 28MT.

For sample-to-bulk scheduling, why should Mercedes Trucks stay on the 28MT order line?

The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Mercedes Trucks, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Keep 28MT traceable through urgent replacement.

During urgent replacement, how can a distributor plan stock for 28MT?

Use active Mercedes Trucks customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Link 28MT photographs to the flange and locating-register fit record.

Export wholesaler receiving review: What should a buyer include in the 28MT quotation request?

Send the complete 28MT reference, Mercedes Trucks details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 3.0kW 9T unit, packing, lead time and freight in one focused offer. Carry the 28MT result into sample-to-bulk scheduling.

Ask for 28MT B2B Starter Motor Supply Terms

Email info@elecdurauto.com with 28MT, Mercedes Trucks details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 3.0kW 9T offer, availability, packing, lead time and freight options.