3103914-12V-9.0KW-11T-4.233M Cummins Starter Motor

3103914-12V-9.0KW-11T-4.233M Industrial Diesel Engine Starter Motor for CUMMINS NH, K6 (NT855)

For regional parts suppliers planning mixed-model inventory, this industrial diesel engine starter motor serves CUMMINS NH, K6 (NT855) replacement demand under reference 3103914-12V-9.0KW-11T-4.233M. Its 12V system, 9.0kW rating and 11T drive help importers and distributors identify the required version before discussing volume supply.

For aftermarket wholesalers updating a customer item master, importers can use the same reference and specification bundle from enquiry through receiving. That continuity helps sales, purchasing and warehouse teams keep a repeat-order item separate from similar housings with another electrical or drive configuration.

3103914-12V-9.0KW-11T-4.233M Starter Motor Specifications and Technical Drawing

For product managers preparing an OE-based quote, the key version difference is the mounting and housing clocking. Compare 65°, 3×120° spacing and 3×Ø17 with the starter being replaced so the pinion alignment and cable access remain correct.

For maintenance suppliers separating similar housings, the source-faithful technical drawing records the available mounting information for 3103914-12V-9.0KW-11T-4.233M, including 3×Ø17, Ø146, 47±1 mm, 65°, 3×120° spacing; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

3103914-12V-9.0KW-11T-4.233M Aftermarket Replacement and Application

For fitment reviewers checking version-defining data, CUMMINS NH, K6 (NT855) is the stated application for 3103914-12V-9.0KW-11T-4.233M. Buyers comparing 3103914-12V-9.0KW-11T-4.233M, 3103914 should confirm that the old starter shares the same 12V system, 9.0kW output and 11T drive before adding the item to a distributor order.

For application specialists confirming electrical ratings, before a purchase order is released, compare the removed starter's mounting face, 11T drive and terminal direction with the approved gallery. Module 4.233 is part of the pinion definition. Any conflicting physical feature should remain on a separate RFQ line until the correct replacement is confirmed.

3103914-12V-9.0KW-11T-4.233M Wholesale Supply for Distributors and Importers

For sales teams setting packaging requirements, Elecdura supplies 3103914-12V-9.0KW-11T-4.233M for wholesale and distributor orders with a standard MOQ of 20 pcs, an indicative 7–15 day lead time after order confirmation and an 18-month warranty under agreed terms. Neutral packaging and private-label review are available for qualified programs.

For warehouse planners planning replenishment, the order can specify testing scope, sampling level, label content and packing details. Reference-label, drive-end and terminal-protection photos may also be requested before shipment for the agreed product version.

3103914-12V-9.0KW-11T-4.233M Starter Motor Buyer FAQ

What evidence best identifies 3103914-12V-9.0KW-11T-4.233M terminal access before an installation slot is booked?

For technical buyers confirming electrical ratings, compare the rear housing and terminal direction in the approved product views for 3103914-12V-9.0KW-11T-4.233M. The battery cable and start-signal lead must reach without sharp bends, rubbing or contact with hot and moving parts. If the body can be clocked differently within the same reference family, confirm the actual terminal position before stock is committed to the order.

Which detail separates 3103914-12V-9.0KW-11T-4.233M carton identification before accepting a substitute?

For engine-parts specialists setting packaging requirements, ask that unit and carton labels repeat the agreed reference, 12V, 9.0kW and 11T where the packaging format permits. Add the customer's barcode and destination marks before production. Clear identification allows distributors to receive, bin and pick this version without opening packaging or relying on a generic starter description.

What evidence best identifies 3103914-12V-9.0KW-11T-4.233M cartons and units for a documented fitment decision?

For regional parts suppliers planning replenishment, sample cartons from different positions in the shipment and compare the 3103914-12V-9.0KW-11T-4.233M labels, 12V marking, 11-tooth pinion, flange shape and terminal protection with the PO specification. Photograph any mixed marking, damaged terminal or different drive end at the installation review, and isolate those pieces so the rest of the lot can be assessed consistently.

What must be matched before quoting 11-tooth pinion identification for a first B2B purchase?

For technical sales teams reviewing drive-end geometry, count all 11 teeth on the 3103914-12V-9.0KW-11T-4.233M pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

Which detail separates 12V system compatibility for a first commercial order?

For fitment reviewers preparing an OE-based quote, 3103914-12V-9.0KW-11T-4.233M is a 12V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement before stock is committed. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

How can a buyer screen CUMMINS NH, K6 (NT855) cranking condition before stock is assigned?

For application specialists separating similar housings, before replacing the starter on CUMMINS NH, K6 (NT855), test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 12V, 9.0kW starter and make a product enquiry easier to resolve.

Which check should lead CUMMINS NH, K6 (NT855) before an installation slot is booked?

For replacement-parts sellers evaluating a direct replacement, CUMMINS NH, K6 (NT855) identifies the intended engine or generator-set family, but it should not be used by itself. Pair the application with 3103914-12V-9.0KW-11T-4.233M, the 12V electrical system and the 11-tooth drive. That combination lets purchasing exclude nearby versions used on another engine build, chassis revision or equipment configuration prior to fixing the quote and shipment date.

How should a workshop distinguish 3103914-12V-9.0KW-11T-4.233M side-profile photograph when preparing a technical inquiry?

For service-parts networks comparing the flange and terminals, the side profile of 3103914-12V-9.0KW-11T-4.233M shows body length, solenoid placement and the relationship between flange and drive. Compare it with a square side view of the removed starter, then use 47±1 mm where available. This angle helps reveal a housing or projection difference that a front-only photograph can miss.

Request a Wholesale Quote for 3103914-12V-9.0KW-11T-4.233M Industrial Diesel Engine Starter Motor

For importers preparing distributor pricing, request pricing for 3103914-12V-9.0KW-11T-4.233M by sharing the application, quantity, delivery country and any neutral or private-label packaging needs. Clear label, drive-end, flange and terminal photos help confirm the exact starter before the offer is issued.