428000-6000 Cummins Starter Motor 12V 2.8kW 11T

428000-6000 Industrial Diesel Engine Starter Motor for CUMMINS B3.3

For regional parts suppliers updating a customer item master, this aftermarket industrial diesel engine starter motor is specified for CUMMINS B3.3 with 12V, 2.8kW and 11T. The page keeps the replacement identity, technical definition and wholesale order information in one place.

For aftermarket wholesalers reviewing customer demand, the commercial value is a clearly identified starter rather than a generic visual match. Buyers can use the OE group, application, product images and technical data together, while neutral packaging and private-label review can be discussed for qualified bulk orders.

428000-6000 Starter Motor Specifications and Technical Drawing

For product managers separating similar housings, this starter should be identified by the complete mounting set, including 2×Ø13, Ø120, 20±1 mm and 37±1 mm. A single matching dimension does not establish a direct replacement.

For maintenance suppliers evaluating a direct replacement, the source-faithful technical drawing records the available mounting information for 428000-6000, including 2×Ø13, Ø120, 20±1 mm, 37±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

428000-6000 Aftermarket Replacement and Application

For fitment reviewers confirming electrical ratings, CUMMINS B3.3 is the stated application for 428000-6000. Buyers comparing 428000-6000, 5256155 should confirm that the old starter shares the same 12V system, 2.8kW output and 11T drive before adding the item to a distributor order.

For application specialists checking repeat-order specifications, do not merge a nearly identical-looking unit into this order only because the main number is related. The 11T drive, module 3, flange and terminals should agree with the version shown here.

428000-6000 Wholesale Supply for Distributors and Importers

For sales teams planning replenishment, importers planning 428000-6000 stock can request volume pricing, neutral or reviewed private-label packaging and agreed inspection records. Standard guidance is 20 pcs minimum, 7–15 days after confirmation and 18 months warranty under sales terms.

For warehouse planners preparing distributor pricing, the order can specify testing scope, sampling level, label content and packing details. Reference-label, drive-end and terminal-protection photos may also be requested before shipment for the agreed product version.

428000-6000 Starter Motor Buyer FAQ

How can an importer validate 11-tooth pinion identification before an installation slot is booked?

For technical buyers checking repeat-order specifications, count all 11 teeth on the 428000-6000 pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

Which specification deserves priority for 2×Ø13, Ø120, 20±1 mm and 37±1 mm during fitment review?

For engine-parts specialists matching the existing starter, use the supplied technical drawing to compare 2×Ø13, Ø120, 20±1 mm and 37±1 mm. Take each measurement from the same face shown or described, then compare the locating shoulder, bolt pattern and drive-end projection as one set. A single matching diameter is not enough if the hole pattern or axial reach places the pinion differently.

Which specification deserves priority for 428000-6000 order testing for repeatable sourcing?

For regional parts suppliers preparing distributor pricing, Elecdura can discuss armature, solenoid, no-load and load testing for 428000-6000. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 12V and 2.8kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

What should purchasing verify first for CUMMINS B3.3 production changes during an application review?

For technical sales teams comparing nearby starter versions, CUMMINS B3.3 may appear across equipment years or engine revisions, so the application name is an entry point rather than the sole proof of fitment. Match 428000-6000, 12V, 2.8kW and 11T to the old starter. A changed suffix, flange or terminal layout should open a separate review for that machine.

Which specification deserves priority for CUMMINS B3.3 cranking condition for repeatable sourcing?

For fitment reviewers separating similar housings, before replacing the starter on CUMMINS B3.3, test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 12V, 2.8kW starter and make a service question easier to resolve.

Which detail separates 428000-6000 three-view gallery when preparing a technical inquiry?

For application specialists evaluating a direct replacement, use the drive-end view to compare the pinion and flange, the side profile to judge housing length and solenoid position, and the rear view to check terminals. All three images belong to 428000-6000; they should be reviewed together with the 11T drive and CUMMINS B3.3 application. Request an additional close-up when the customer's unit hides a deciding feature.

Which specification deserves priority for 11T and module 3 when the starter removed from the machine is available?

For replacement-parts sellers comparing the flange and terminals, the supplied drive uses 11 teeth with module 3. Count the old pinion teeth and compare outside diameter, rest position and engagement depth before stock is committed. The 3 module is part of the gear definition, so another pitch must not be combined on the combined buying line. This check protects the ring gear from an incorrect mesh.

How can a buyer screen 12V and 2.8kW during fitment review?

For service-parts networks reviewing a replacement proposal, 428000-6000 is defined as 12V and 2.8kW. Confirm the machine electrical system and the old starter rating together, because system voltage establishes electrical compatibility while rated power influences available cranking effort. Battery condition, cable size and ground integrity should also suit this rating; a different voltage or output is a separate product, even when the housings appear similar.

Request a Wholesale Quote for 428000-6000 Industrial Diesel Engine Starter Motor

For importers opening a first distributor purchase, ask for a quote on 428000-6000 with the full CUMMINS B3.3 record, quantity and packaging plan. We will verify the requested 12V, 2.8kW and 11T configuration and return the relevant wholesale terms.