8201043 Cummins Starter Motor 24V 6.0kW 10T

8201043 Industrial Diesel Engine Starter Motor for CUMMINS QSB7 (R215Vs)

For wholesale program managers updating a customer item master, 8201043 is an aftermarket industrial diesel engine starter motor for CUMMINS QSB7 (R215Vs). Its 24V system, 6.0kW output and 10T pinion give diesel-engine distributors, generator-set suppliers and industrial parts importers a clear product definition for OE-reference replacement and repeat-order sourcing.

For sales teams reviewing customer demand, distributors can quote the exact application and starter configuration without turning the page into a generic component guide. Elecdura can also review customer labels, carton requirements and inspection documents for planned orders.

8201043 Starter Motor Specifications and Technical Drawing

For purchasing teams preparing a technical RFQ, the product identity combines 8201043, CUMMINS QSB7 (R215Vs), 24V, 6.0kW and 10T. Keeping those facts together helps buyers separate this starter from adjacent versions.

For distributors checking version-defining data, the source-faithful technical drawing records the available mounting information for 8201043, including 3×Ø11; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

8201043 Aftermarket Replacement and Application

For service-parts networks preparing an OE-based quote, use 8201043 as the primary product identity for CUMMINS QSB7 (R215Vs). The cross-reference group 8201043, 5340058 supports aftermarket matching, while the electrical rating and drive-end configuration distinguish the exact version supplied here.

For importers separating similar housings, the unit taken from service should agree with the approved drive-end, side and rear views. Confirm the 10T pinion and module 3.175, then keep any different flange or terminal layout outside the current priced item.

8201043 Wholesale Supply for Distributors and Importers

For inventory buyers planning replenishment, buyers can discuss 20 pcs MOQ, production planning around 7–15 days after confirmation, neutral cartons or private-label packaging, and an 18-month warranty under the agreed sales terms.

For fleet-parts buyers preparing distributor pricing, Elecdura can align product identification, electrical testing and packaging records with the buyer's order. The exact inspection scope depends on the agreed quantity and market requirements and should be stated before production planning.

8201043 Starter Motor Buyer FAQ

Which comparison prevents a mismatch for 8201043 among Cummins versions for a documented fitment decision?

For technical sales teams separating similar housings, 8201043 should remain separate from another Cummins starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 24V, 6.0kW and 10T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

Which detail separates locating diameter before a purchase order is released?

For fitment reviewers matching the starter being replaced, no locating diameter is published for 8201043. Measure the old starter at the flange shoulder with a caliper and photograph the measuring points. Combine that value with the hole pattern and pinion projection before quoting, because a visually close flange can still center the drive differently and should not inherit dimensions from another model.

What evidence best identifies 24V and 6.0kW during fitment review?

For application specialists reviewing drive-end geometry, 8201043 is defined as 24V and 6.0kW. Confirm the machine electrical system and the old starter rating together, because system voltage decides whether the circuit is suitable while the power rating relates to cranking demand. Battery condition, cable size and ground integrity should also suit this rating; a different voltage or output is a separate product, even when the housings appear similar.

What must be matched before quoting 8201043 cartons and units before stock is assigned?

For sales teams opening a first commercial order, sample cartons from different positions in the shipment and compare the 8201043 labels, 24V marking, 10-tooth pinion, flange shape and terminal protection with the procurement specification. Photograph any mixed marking, damaged terminal or different drive end before workshop fitting, and isolate those pieces so the rest of the lot can be assessed consistently.

What should receiving teams compare on 10-tooth pinion identification before an installation slot is booked?

For service-parts networks preparing a technical RFQ, count all 10 teeth on the 8201043 pinion and compare the gear diameter with the removed starter. Tooth count is a fast screening point, but engagement depth, pitch and rest position still need agreement. If the old unit carries another count, treat it as a different drive version and review the ring gear before fitting.

What must be matched before quoting 8201043 terminal access for warehouse identification?

For importers checking version-defining data, compare the rear housing and terminal direction in the approved product views for 8201043. The battery cable and start-signal lead must reach without sharp bends, rubbing or contact with hot and moving parts. If the body can be clocked differently within the same reference family, confirm the actual terminal position before stock is committed to the order.

How should a workshop distinguish 8201043 rear-terminal photograph during an application review?

For product managers comparing the flange and terminals, use the rear view of 8201043 to identify battery and signal terminals, their direction and the clearance around each stud. Match the customer's photograph from the same orientation and consider cable routing in CUMMINS QSB7 (R215Vs). A correct drive end with an unusable terminal position is not a complete fitment match.

How should a distributor confirm 8201043 replenishment when several versions look alike?

For fleet-parts buyers planning mixed-model inventory, keep 8201043, 24V, 6.0kW, 10T, the application description and the agreed packaging on the same replenishment line. Add dated photos when the equipment fleet changes or a different starter being replaced appears. This gives purchasing and warehouse teams enough detail to avoid silently merging a new version into established stock.

Request a Wholesale Quote for 8201043 Industrial Diesel Engine Starter Motor

For private-label buyers opening a first B2B purchase, provide 8201043, CUMMINS QSB7 (R215Vs), expected order quantity and destination. Include photos or measurements when the starter removed from the machine differs in suffix or mounting appearance, and Elecdura will review the correct version before pricing.