36100-4A020 Hyundai Starter Motor 12V 2.2kW 10T

36100-4A020 Hyundai Starter Motor Bulk Supply for Fleet and Equipment Parts Buyers

When sourcing 36100-4A020 for Hyundai vehicles and equipment cross-referenced to 36100-4A020, control the order by the complete reference and the 12V, 2.2kW, 10-tooth clockwise configuration. A visual match is not enough: compare the old-unit label, drive end, mounting face, pinion reach and cable or terminal arrangement with the supplied sample.

The distributor record for 36100-4A020 should connect the reference group 36100-4A020 / 36100-4A025 / 1196795 / 1250825 with Hyundai vehicles and equipment cross-referenced to 36100-4A020. Add the old-unit label, mounting-face image, terminal view and receiving result to that record. Reuse it for repeat quotations, but create a new revision whenever the supplier changes the suffix, housing, pinion or electrical rating. A disciplined record reduces avoidable substitutions during urgent replenishment.

36100-4A020 Starter Motor B2B Production and Test Video for B2B Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 36100-4A020.

36100-4A020 Starter Motor Distributor Specifications for Aftermarket Buyers

36100-4A020 Starter Motor OE Cross-Reference Review for Fleet Replacement

Use 36100-4A020 as the primary purchasing reference and cross-check 36100-4A025, 1196795, 1250825. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

36100-4A020 Starter Motor Bulk Fitment Approval for Wholesale Supply

Confirm the complete 36100-4A020 / 36100-4A025 / 1196795 / 1250825 group together with the 12V, 2.2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

36100-4A020 Starter Motor Wholesale Receiving Inspection for Distributor Sourcing

For a wholesale shipment, sample units across the 36100-4A020 lot rather than inspecting only the top carton. Compare reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

36100-4A020 Starter Motor MOQ and Private-Label Supply for Bulk Procurement

36100-4A020 Starter Motor Distributor FAQ for B2B Supply

Can a similar 12V starter replace 36100-4A020?

A substitute is acceptable only when its complete OE relationship, 12V system, 2.2kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

How can buyers separate a 36100-4A020 fault from an equipment fault?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load prior to condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a 36100-4A020 RFQ technically complete?

Send 36100-4A020 and all visible OE numbers, the full application or engine document, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

How are MOQ, samples and repeat orders managed for 36100-4A020?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede batch release when fitment evidence is incomplete. Mark the approved sample with 36100-4A020, procurement team application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

Can 36100-4A020 be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on 36100-4A020 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product prior to instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 36100-4A020?

Use 36100-4A020 as the control reference and compare the complete group 36100-4A020 / 36100-4A025 / 1196795 / 1250825. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that supporting evidence to one quotation and purchase line so repeat orders remain traceable.

Where is 36100-4A020 commonly used, and what still needs confirmation?

Confirm the complete 36100-4A020 / 36100-4A025 / 1196795 / 1250825 group together with the 12V, 2.2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on 36100-4A020?

Confirm the complete 36100-4A020 / 36100-4A025 / 1196795 / 1250825 group together with the 12V, 2.2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Request a B2B Quote for 36100-4A020 Starter Motors

Send the complete reference, Hyundai vehicles and equipment cross-referenced to 36100-4A020, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.