36100-93C00 Mitsubishi Starter Motor 24V 5.5kW 11T

36100-93C00 Heavy-Duty Starter Motor for MITSUBISHI 6D16

For aftermarket wholesalers reviewing customer demand, built for MITSUBISHI 6D16, this heavy-duty starter motor combines 24V operation, 5.5kW rated power and a 11T drive. Elecdura supplies 36100-93C00 for commercial and off-highway replacement programs, including distributor stock and planned replenishment.

For sourcing managers planning a repeat order, the goal is a repeatable supply line: one agreed product identity, one packaging definition and one set of incoming checks. This is useful for importers building category coverage as well as fleet suppliers replenishing an existing starter reference.

36100-93C00 Starter Motor Specifications and Technical Drawing

For maintenance suppliers evaluating a direct replacement, the key version difference is the mounting and housing clocking. Compare 2×135° spacing with the existing starter so the pinion alignment and cable access remain correct.

For equipment-parts dealers comparing the flange and terminals, the source-faithful technical drawing records the available mounting information for 36100-93C00, including 2×135° spacing; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

36100-93C00 Aftermarket Replacement and Application

For application specialists checking repeat-order specifications, this aftermarket starter motor is organized around 36100-93C00 for MITSUBISHI 6D16. Related numbers remain useful search and purchasing references, but Elecdura treats a changed rating, pinion, flange or terminal layout as a separate version for quotation.

For replacement-parts sellers matching the starter removed from the machine, product photos and the stated specifications should be reviewed together. If the old starter uses another pinion, mounting face or rear connection, keep that configuration on a separate RFQ until it is identified.

36100-93C00 Wholesale Supply for Distributors and Importers

For warehouse planners preparing distributor pricing, buyers can discuss 20 pcs MOQ, production planning around 7–15 days after confirmation, neutral cartons or private-label packaging, and an 18-month warranty under the agreed sales terms.

For importers opening a first stocking order, define the reference group, accepted product version, inspection request and packaging standard before production. Those records help both sides manage replenishment and resolve any receiving question efficiently.

36100-93C00 Starter Motor Buyer FAQ

How can an importer validate 36100-93C00 side-profile photograph before stock is assigned?

For engine-parts specialists matching the removed unit, the side profile of 36100-93C00 shows body length, solenoid placement and the relationship between flange and drive. Compare it with a square side view of the removed starter, then use measured axial references where available. This angle helps reveal a housing or projection difference that a front-only photograph can miss.

How should a workshop distinguish 36100-93C00 rear-terminal photograph when the original unit in hand is available?

For fleet-parts buyers reviewing drive-end geometry, use the rear view of 36100-93C00 to identify battery and signal terminals, their direction and the clearance around each stud. Match the customer's photograph from the same orientation and consider cable routing in MITSUBISHI 6D16. A correct drive end with an unusable terminal position is not a complete fitment match.

Which comparison prevents a mismatch for 36100-93C00 inside a mixed starter shipment when several versions look alike?

For aftermarket wholesalers opening a first stocking order, give each carton line its own reference, 24V, 5.5kW and 11T marking. The packing list should preserve those same fields. Receiving can then compare labels and drive-end appearance without opening every carton, while any mixed or unclear unit is isolated for review.

Which detail separates 36100-93C00 locating face before a purchase order is released?

For fitment reviewers separating similar housings, the 36100-93C00 flange should sit flat against the MITSUBISHI 6D16 mounting surface without being pulled into place by the bolts. Clean both faces and compare the locating shoulder, hole pattern and any stated diameters. Rocking, a visible gap or bolt misalignment indicates that the version check is incomplete and installation should stop.

How can a buyer screen mounting-hole pattern when confirming the quotation line?

For application specialists evaluating a direct replacement, A complete mounting-hole callout is not stated for 36100-93C00. Photograph the old flange straight on and provide hole count, bore diameter and center spacing from the same datum. Those measured points let purchasing separate close housings without transferring hole data from another starter or assuming that a similar silhouette will bolt in.

Which check should lead 36100-93C00 during an application review?

For replacement-parts sellers comparing the flange and terminals, 36100-93C00 should be treated as one inquiry group only after the starter being replaced is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate quoted item instead of assuming that the shared number guarantees interchangeability.

Which comparison prevents a mismatch for 36100-93C00 among Mitsubishi versions when several versions look alike?

For service-parts networks reviewing a replacement proposal, 36100-93C00 should remain separate from another Mitsubishi starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 24V, 5.5kW and 11T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

How should a workshop distinguish 36100-93C00 order testing during an application review?

For importers updating a customer item master, Elecdura can discuss armature, solenoid, no-load and load testing for 36100-93C00. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 5.5kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

Request a Wholesale Quote for 36100-93C00 Heavy-Duty Starter Motor

For inventory buyers requesting production pricing, provide 36100-93C00, MITSUBISHI 6D16, expected order quantity and destination. Include photos or measurements when the original unit in hand differs in suffix or mounting appearance, and Elecdura will review the correct version before pricing.